The DOI matches its Crossref record.
Effect of Stepped Light Intensity on Polymerization Force and Conversion in a Photoactivated Composite
Abstract
Purpose: This study evaluated the effect of stepped light intensity on the polymerization shrinkage forces and degrees of conversion of a hybrid composite. Materials and Methods: Composite specimens were bonded between two steel rods (5.00 mm diameter, 1.25 mm apart, configuration factor = 2) mounted in a universal testing machine using a constant displacement mode. Polymerization contraction force was recorded for 300 seconds under four light exposure conditions: group 1: 40 s × 800 mW/cm 2; group 2: 10 s × 100 mW/cm 2+ 30 s × 800 mW/cm 2; group 3: 60 s × 800 mW/cm 2; group 4: 10 s × 100 mW/cm 2+ 50 s × 800 mW/cm 2. Maximum curing force (N 300s) and maximum force rate of the four groups were compared using one‐way analysis of variance (ANOVA) (α= 0.05) and the Tukey test. Degree of conversion in all groups was evaluated at two depths (top surface and 2 mm) using Fourier transform infrared spectroscopy (FTIR). Results: Mean maximum shrinkage forces and standard deviations (SD) were: group 1, 177 N (SD = 23); group 2, 172 N (SD = 11); group 3, 213 N (SD = 15); group 4, 197 N (SD = 17). Mean maximum forces for stepped and standard groups with the same duration (1 and 2; 3 and 4) were not statistically different; means for groups 2 and 3 were statistically different. Maximum force rates were not significantly different (p= .1548). Force:time curves were S‐shaped. Specimens exposed to stepped curing exhibited longer delays before force was recorded. Mode of curing was shown not to contribute to overall cure, but both duration of cure and the depth (top surface vs. 2.00 mm) were significant with an interaction effect. CLINICAL SIGNIFICANCE Mean maximum shrinkage force and force rate exhibited during the first 300 seconds of polymerization were not influenced by using stepped light exposure. Degree of conversion was equivalent for exposures of similar total duration at 2‐mm depth. Mode of cure (stepped vs. continuous intensity) had no effect on degree of conversion.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Braga, R. R., Ballester, R. Y., & Ferracane, J. L. (2005) · Dental Materials · doi:10.1016/j.dental.2005.04.018 · Cited by 730
State-of-the-art: Dental photocuring—A review
Rueggeberg, F. A. (2011) · Dental Materials · doi:10.1016/j.dental.2010.10.021 · Cited by 338
Self-citationContraction Stress Related to Degree of Conversion and Reaction Kinetics
Braga, R. R., & Ferracane, J. L. (2002) · Journal of Dental Research · doi:10.1177/0810114 · Cited by 327
Reduction of polymerization contraction stress for dental composites by two-step light-activation
Lim, B.-S., Ferracane, J. L., Sakaguchi, R. L., & Condon, J. R. (2002) · Dental Materials · doi:10.1016/s0109-5641(01)00066-5 · Cited by 300
Photo-polymerization shrinkage-stress kinetics in resin-composites: methods development
Watts, D. (2003) · Dental Materials · doi:10.1016/s0109-5641(02)00123-9 · Cited by 268
Metadata
- Authors
- BOUSCHLICHER, M. R., RUEGGEBERG, F. A., & BOYER, D. B.
- Venue
- Journal of Esthetic and Restorative Dentistry
- Publisher
- Wiley
- Published
- 2000-01
- Volume
- 12
- Issue
- 1
- Pages
- 23-32
- ISSN
- 1496-4155 (ISSN-L)
- 1708-8240
- OpenAlex
- W1995664283
- Cited by
- 171
- References
- 0
- FWCI
- 23.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of Stepped Light Intensity on Polymerization Force and Conversion in a Photoactivated Composite. https://app.cochat.ai/papers/10.1111/j.1708-8240.2000.tb00195.x
- The paper
- BOUSCHLICHER, M. R., RUEGGEBERG, F. A., & BOYER, D. B. (2000). Effect of Stepped Light Intensity on Polymerization Force and Conversion in a Photoactivated Composite. Journal of Esthetic and Restorative Dentistry. https://doi.org/10.1111/j.1708-8240.2000.tb00195.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.