The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Thermophysical and mechanical properties of novel high‐entropy metal nitride‐carbides
Abstract
In this work, a novel (Hf 0.2 Zr 0.2 Ta 0.2 Nb 0.2 Ti 0.2 )(N 0.5 C 0.5 ) high‐entropy nitride‐carbide (HENC‐1) with multi‐cationic and ‐anionic sublattice structure was reported and their thermophysical and mechanical properties were studied for the first time. The results of the first‐principles calculations showed that HENC‐1 had the highest mixing entropy of 1.151R, which resulted in the lowest Gibbs free energy above 600 K among HENC‐1, (Hf 0.2 Zr 0.2 Ta 0.2 Nb 0.2 Ti 0.2 )N high‐entropy nitrides (HEN‐1), and (Hf 0.2 Zr 0.2 Ta 0.2 Nb 0.2 Ti 0.2 )C high‐entropy carbides (HEC‐1). In this case, HENC‐1 samples were successfully fabricated by hot‐pressing sintering technique at the lowest temperature (1773 K) among HENC‐1, HEN‐1 and HEC‐1 samples. The as‐fabricated HENC‐1 samples showed a single rock‐salt structure of metal nitride‐carbides and high compositional uniformity. Meanwhile, they exhibited high microhardness of 19.5 ± 0.3 GPa at an applied load of 9.8 N and nanohardness of 33.4 ± 0.5 GPa and simultaneously possessed a high bulk modulus of 258 GPa, Young's modulus of 429 GPa, shear modulus of 176 GPa, and elastic modulus of 572 ± 7 GPa. Their hardness and modulus are the highest among HENC‐1, HEN‐1 and HEC‐1 samples, which could be attributed to the presence of mass disorder and lattice distortion from the multi‐anionic sublattice structure and small grain in HENC‐1 samples. In addition, the thermal conductivity of HENC‐1 samples was significantly lower than the average value from the “rule of mixture” between HEC‐1 and HEN‐1 samples in the range of 300‐800 K, which was due to the presence of lattice distortion from the multi‐anionic sublattice structure in HENC‐1 samples.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Commentary: The Materials Project: A materials genome approach to accelerating materials innovation
Jain, A., Ong, S. P., Hautier, G., Chen, W., Richards, W. D., Dacek, S., Cholia, S., Gunter, D., Skinner, D., Ceder, G., et al. (2013) · APL Materials · doi:10.1063/1.4812323 · Cited by 13,094
Cited by
High-entropy ceramics: Present status, challenges, and a look forward
Xiang, H., Xing, Y., Dai, F.-Z., Wang, H., Su, L., Miao, L., Zhang, G., Wang, Y., Qi, X., Yao, L., et al. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0477-y · Cited by 1,109
High-entropy ceramics: Review of principles, production and applications
Akrami, S., Edalati, P., Fuji, M., & Edalati, K. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100644 · Cited by 1,008
Metadata
- Authors
- Wen, T., Ye, B., Nguyen, M. C., Ma, M., & Chu, Y.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 2020-07-18
- Volume
- 103
- Issue
- 11
- Pages
- 6475-6489
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W3037898147
- Cited by
- 160
- References
- 1
- FWCI
- 7.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermophysical and mechanical properties of novel high‐entropy metal nitride‐carbides. https://app.cochat.ai/papers/10.1111/jace.17333
- The paper
- Wen, T., Ye, B., Nguyen, M. C., Ma, M., & Chu, Y. (2020). Thermophysical and mechanical properties of novel high‐entropy metal nitride‐carbides. Journal of the American Ceramic Society. https://doi.org/10.1111/jace.17333
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.