Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 175

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Accuracy of 3D Printed Models Created by Two Technologies of Printers with Different Designs of Model Base

Rungrojwittayakul, Oraphan, Kan, Joseph Y., Shiozaki, Kenzo, Swamidass, Rajesh S., Goodacre, Brian J., Goodacre, Charles J., Lozada, Jaime L. · 2020 · Journal of Prosthodontics

Abstract

Purpose: To evaluate the accuracy of three‐dimensional (3D) printed models manufactured using two different printer technologies with different model base designs. Materials and Methods: A maxillary typodont was scanned using a desktop scanner to generate the Standard Tessellation Language (STL) file as a reference scan. After the scanning procedure, the STL file was exported to Model Builder™ for designing the following two types of the model bases: a solid base design and a hollow base design with a 2.0 mm thickness of the external shell. Each design was printed to produce 10 models using a Continuous Liquid Interface Production (CLIP) printer and a Digital Light Processing (DLP) printer. The following four groups were tested: CLIP with solid base (CS); CLIP with hollow base (CH); DLP with solid base (DS); and DLP with hollow base (DH). A total of 40 models were scanned using the same desktop scanner to generate the STL files for evaluation of the accuracy by evaluation of trueness and precision. All STL files were superimposed with the control STL file via surface matching software and a comparison was performed using the 3D color mapping function and a 2D comparison of 48 points selected on the tested model. The data were collected by measuring the deviation between the tested model and the reference scan. Trueness was calculated by using the comparison among four tested groups. The Kruskal‐Wallis analysis was conducted to assess the overall statistical significance of differences among the tested groups (α = 0.05). For precision measurement, the evaluation was conducted using Intraclass Correlation Coefficient (ICC) value at 95% confident interval to determine the deviation within the same tested groups. Results: The median values for the deviated distance of the four tested groups were 0.045 (CH), 0.035 (CS), 0.077 (DH), and 0.077 mm (DS). There were no statistically significant differences between the trueness of the two groups when using the same printers regardless of the designs of model base (p > 0.05). However, when comparing the two printers using the same model base design and the two different designs of model base, there were statistically significant differences in trueness (p < 0.05). The 3D printed models created using CLIP technology had higher trueness than the DLP technology printer. Precision of the 3D printed model was displayed in ICC value. The ICC values of four tested groups were 0.968 (CH), 0.981 (CS), 0.969 (DH), and 0.983 (DS). All tested groups were classified as exhibiting an excellent level of precision based on 95% confident interval of the ICC estimation. Conclusions: The accuracy of 3D printed models was affected by the printer technology regardless of whether the model base was solid or hollow. The CLIP technology printer produced significantly less variation from the reference model than the DLP printer. However, all of the 3D printed models were determined to exhibit a clinically acceptable level of accuracy based on the recorded dimensions being less than 100 µm different than the reference model.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1111/jopr.13107

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 175

Metadata

Authors
Rungrojwittayakul, O., Kan, J. Y., Shiozaki, K., Swamidass, R. S., Goodacre, B. J., Goodacre, C. J., & Lozada, J. L.
Venue
Journal of Prosthodontics
Publisher
Wiley
Published
2019-09-09
Volume
29
Issue
2
Pages
124-128
ISSN
  • 1059-941X (ISSN-L)
  • 1532-849X
OpenAlex
W2972392425
Cited by
175
References
1
FWCI
5.31
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Accuracy of 3D Printed Models Created by Two Technologies of Printers with Different Designs of Model Base. https://app.cochat.ai/papers/10.1111/jopr.13107
The paper
Rungrojwittayakul, O., Kan, J. Y., Shiozaki, K., Swamidass, R. S., Goodacre, B. J., Goodacre, C. J., & Lozada, J. L. (2020). Accuracy of 3D Printed Models Created by Two Technologies of Printers with Different Designs of Model Base. Journal of Prosthodontics. https://doi.org/10.1111/jopr.13107

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.