The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Mathematical Basis and Validation of the Full Cavitation Model
Abstract
Cavitating flows entail phase change and hence very large and steep density variations in the low pressure regions. These are also very sensitive to: (a) the formation and transport of vapor bubbles, (b) the turbulent fluctuations of pressure and velocity, and (c) the magnitude of noncondensible gases, which are dissolved or ingested in the operating liquid. The presented cavitation model accounts for all these first-order effects, and thus is named as the “full cavitation model.” The phase-change rate expressions are derived from a reduced form of Rayleigh-Plesset equation for bubble dynamics. These rates depend upon local flow conditions (pressure, velocities, turbulence) as well as fluid properties (saturation pressure, densities, and surface tension). The rate expressions employ two empirical constants, which have been calibrated with experimental data covering a very wide range of flow conditions, and do not require adjustments for different problems. The model has been implemented in an advanced, commercial, general-purpose CFD code, CFD-ACE+. Final validation results are presented for flows over hydrofoils, submerged cylindrical bodies, and sharp-edged orifices. Suggestions for possible extensions of the model implementation, e.g., to nonisothermal flows, for ingestion and mixing of noncondensible gases, and for predictions of noise and surface damage are outlined.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cavitation and Bubble Dynamics
Brennen, C. E. (2013) · Cambridge University Press eBooks · doi:10.1017/cbo9781107338760 · Cited by 3,265
Cavitation And Bubble Dynamics
Brennen, C. E. (1995) · doi:10.1093/oso/9780195094091.001.0001 · Cited by 2,444
Cited by
Ji, B., Luo, X., Arndt, R. E. A., & Wu, Y. (2014) · Ocean Engineering · doi:10.1016/j.oceaneng.2014.05.005 · Cited by 390
Theoretical Model of Dynamic Bulk Modulus for Aerated Hydraulic Fluid
Yuan, X., Wang, W., Zhu, X., & Zhang, L. (2022) · Chinese Journal of Mechanical Engineering · doi:10.1186/s10033-022-00794-1 · Cited by 40
Metadata
- Authors
- Singhal, A. K., Athavale, M. M., Li, H., & Jiang, Y.
- Venue
- Journal of Fluids Engineering
- Publisher
- ASME International
- Published
- 2002-08-19
- Volume
- 124
- Issue
- 3
- Pages
- 617-624
- ISSN
- 0098-2202 (ISSN-L)
- 1528-901X
- OpenAlex
- W2086728395
- Cited by
- 1,639
- References
- 2
- FWCI
- 12.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mathematical Basis and Validation of the Full Cavitation Model. https://app.cochat.ai/papers/10.1115/1.1486223
- The paper
- Singhal, A. K., Athavale, M. M., Li, H., & Jiang, Y. (2002). Mathematical Basis and Validation of the Full Cavitation Model. Journal of Fluids Engineering. https://doi.org/10.1115/1.1486223
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.