The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
A New Model for Boundary Layer Transition Using a Single-Point RANS Approach
Abstract
This paper presents the development and implementation of a new model for bypass and natural transition prediction using Reynolds-averaged Navier-Stokes computational fluid dynamics (CFD), based on modification of two-equation, linear eddy-viscosity turbulence models. The new model is developed herein based on considerations of the universal character of transitional boundary layers that have recently been documented in the open literature, and implemented into a popular commercial CFD code (FLUENT) in order to assess its performance. Two transitional test cases are presented: (1) a boundary layer developing on a flat heated wall, with free-stream turbulence intensity Tu∞ ranging from 0.2 to 6%; and (2) flow over a turbine stator vane, with chord Reynolds number 2.3×105, and Tu∞ from 0.6 to 20%. Results are presented in terms of Stanton number, and compared to experimental data for both cases. Results show good agreement with the test cases and suggest that the new approach has potential as a predictive tool.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A new k-ε eddy viscosity model for high Reynolds number turbulent flows
Shih, T.-H., Liou, W. W., Shabbir, A., Yang, Z., & Zhu, J. (1995) · Computers & Fluids · doi:10.1016/0045-7930(94)00032-t · Cited by 6,119
Turbulence statistics in fully developed channel flow at low Reynolds number
Kim, J., Moin, P., & Moser, R. (1987) · Journal of Fluid Mechanics · doi:10.1017/s0022112087000892 · Cited by 4,873
Wolfshtein, M. (1969) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(69)90012-x · Cited by 1,029
Optimal disturbances and bypass transition in boundary layers
Andersson, P., Berggren, M., & Henningson, D. S. (1999) · Physics of Fluids · doi:10.1063/1.869908 · Cited by 632
Modeling of Flow Transition Using an Intermittency Transport Equation
Suzen, Y. B., & Huang, P. G. (2000) · Journal of Fluids Engineering · doi:10.1115/1.483255 · Cited by 221
Impact of Film-Cooling Jets on Turbine Aerodynamic Losses
Walters, D. K., & Leylek, J. H. (1999) · Journal of Turbomachinery · doi:10.1115/1.1303818 · Cited by 57
Self-citation
Cited by
Transition Modelling for General Purpose CFD Codes
Menter, F. R., Langtry, R., & Völker, S. (2006) · Flow, Turbulence and Combustion · doi:10.1007/s10494-006-9047-1 · Cited by 692
Deep Learning Methods for Reynolds-Averaged Navier–Stokes Simulations of Airfoil Flows
Thuerey, N., Weißenow, K., Prantl, L., & Hu, X. (2020) · AIAA Journal · doi:10.2514/1.j058291 · Cited by 609
A One-Equation Local Correlation-Based Transition Model
Menter, F. R., Smirnov, P. E., Liu, T., & Avancha, R. (2015) · Flow, Turbulence and Combustion · doi:10.1007/s10494-015-9622-4 · Cited by 562
Metadata
- Authors
- Walters, D. K., & Leylek, J. H.
- Venue
- Journal of Turbomachinery
- Publisher
- ASME International
- Published
- 2004-01-01
- Volume
- 126
- Issue
- 1
- Pages
- 193-202
- ISSN
- 0889-504X (ISSN-L)
- 1528-8900
- OpenAlex
- W1995127929
- Cited by
- 298
- References
- 6
- FWCI
- 5.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A New Model for Boundary Layer Transition Using a Single-Point RANS Approach. https://app.cochat.ai/papers/10.1115/1.1622709
- The paper
- Walters, D. K., & Leylek, J. H. (2004). A New Model for Boundary Layer Transition Using a Single-Point RANS Approach. Journal of Turbomachinery. https://doi.org/10.1115/1.1622709
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.