The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
State of the Art in Laser Surface Texturing
Abstract
Surface texturing has emerged in the last decade as a viable option of surface engineering resulting in significant improvement in load capacity, wear resistance, friction coefficient etc. of tribological mechanical components. Various techniques can be employed for surface texturing but Laser Surface Texturing (LST) is probably the most advanced so far. LST produces a very large number of micro-dimples on the surface and each of these micro-dimples can serve either as a micro-hydrodynamic bearing in cases of full or mixed lubrication, a micro-reservoir for lubricant in cases of starved lubrication conditions, or a micro-trap for wear debris in either lubricated or dry sliding. The present paper reviews the current effort being made world wide on surface texturing in general and on laser surface texturing in particular. It presents the state of the art in LST and the potential of this technology in various lubricated applications like mechanical seals, piston rings and thrust bearings. The paper also describes some fundamental on going research around the world with LST.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wakuda, M., Yamauchi, Y., Kanzaki, S., & Yasuda, Y. (2003) · Wear · doi:10.1016/s0043-1648(03)00004-8 · Cited by 708
Analytical and Experimental Investigation of Laser-Textured Mechanical Seal Faces
Etsion, I., Kligerman, Y., & Halperin, G. (1999) · Tribology Transactions · doi:10.1080/10402009908982248 · Cited by 615
Self-citationA Theory of Lubrication by Microirregularities
Hamilton, D. B., Walowit, J. A., & Allen, C. M. (1966) · Journal of Basic Engineering · doi:10.1115/1.3645799 · Cited by 581
Influence of surface texture on boundary lubricated sliding contacts
Pettersson, U., & Jacobson, S. (2003) · Tribology International · doi:10.1016/s0301-679x(03)00104-x · Cited by 556
Friction-Reducing Surface-Texturing in Reciprocating Automotive Components
Ronen, A., Etsion, I., & Kligerman, Y. (2001) · Tribology Transactions · doi:10.1080/10402000108982468 · Cited by 500
Self-citationFemtosecond ablation of ultrahard materials
Dumitru, G., Romano, V., Weber, H. P., Sentis, M., & Marine, W. (2002) · Applied Physics A: Materials Science & Processing · doi:10.1007/s003390101183 · Cited by 198
Anno, J. N., Walowit, J. A., & Allen, C. M. (1968) · Journal of Lubrication Technology · doi:10.1115/1.3601568 · Cited by 161
Load Support and Leakage from Microasperity-Lubricated Face Seals
Anno, J. N., Walowit, J. A., & Allen, C. M. (1969) · Journal of Lubrication Technology · doi:10.1115/1.3555030 · Cited by 139
Deterministic Micro Asperities on Bearings and Seals Using a Modified LIGA Process
Stephens, L. S., Siripuram, R., Hayden, M. A., & McCartt, B. M. (2004) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.1619430 · Cited by 70
Cited by
Synergetic effects of surface texturing and solid lubricants to tailor friction and wear – A review
Rosenkranz, A., Costa, H. L., Baykara, M. Z., & Martini, A. (2021) · Tribology International · doi:10.1016/j.triboint.2020.106792 · Cited by 505
Mao, B., Siddaiah, A., Liao, Y., & Menezes, P. L. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.02.009 · Cited by 489
Electrolytic plasma technology: Science and engineering—An overview
Gupta, P., Tenhundfeld, G., Daigle, E. O., & Ryabkov, D. (2007) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2006.11.023 · Cited by 414
Yu, H., Wang, X., & Zhou, F. (2010) · Tribology Letters · doi:10.1007/s11249-009-9497-4 · Cited by 355
Fundamentals of Laser-Material Interaction and Application to Multiscale Surface Modification
Brown, M. S., & Arnold, C. B. (2010) · Springer Series in Materials Science · doi:10.1007/978-3-642-10523-4_4 · Cited by 328
Metadata
- Authors
- Etsion, I.
- Venue
- Journal of Tribology
- Publisher
- ASME International
- Published
- 2005-01-01
- Volume
- 127
- Issue
- 1
- Pages
- 248-253
- ISSN
- 0742-4787 (ISSN-L)
- 1528-8897
- OpenAlex
- W3157563064
- Cited by
- 1,409
- References
- 9
- FWCI
- 59.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.