The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Building Surrogate Models Based on Detailed and Approximate Simulations
Abstract
Preliminary design of a complex system often involves exploring a broad design space. This may require repeated use of computationally expensive simulations. To ease the computational burden, surrogate models are built to provide rapid approximations of more expensive models. However, the surrogate models themselves are often expensive to build because they are based on repeated experiments with computationally expensive simulations. An alternative approach is to replace the detailed simulations with simplified approximate simulations, thereby sacrificing accuracy for reduced computational time. Naturally, surrogate models built from these approximate simulations are also imprecise. A strategy is needed for improving the precision of surrogate models based on approximate simulations without significantly increasing computational time. In this paper, a new approach is taken to integrate data from approximate and detailed simulations to build a surrogate model that describes the relationship between output and input parameters. Experimental results from approximate simulations form the bulk of the data, and they are used to build a model based on a Gaussian process. The fitted model is then “adjusted” by incorporating a small amount of data from detailed simulations to obtain a more accurate prediction model. The effectiveness of this approach is demonstrated with a design example involving cellular materials for an electronics cooling application. The emphasis is on the method and not on the results per se.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The topological design of multifunctional cellular metals
Evans, A. G., Hutchinson, J. W., Fleck, N. A., Ashby, M. F., & Wadley, H. N. G. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00016-5 · Cited by 1,134
Cited by
Digital twin: values, challenges and enablers from a modeling perspective
Rasheed, A., San, O., & Kvamsdal, T. (2020) · IEEE Access · doi:10.1109/access.2020.2970143 · Cited by 1,952
Managing computational complexity using surrogate models: a critical review
Alizadeh, R., Allen, J. K., & Mistree, F. (2020) · Research in Engineering Design · doi:10.1007/s00163-020-00336-7 · Cited by 453
Self-citationBayesian Hierarchical Modeling for Integrating Low-Accuracy and High-Accuracy Experiments
Qian, P. Z. G., & Wu, C. F. J. (2008) · Technometrics · doi:10.1198/004017008000000082 · Cited by 336
Blind Kriging: A New Method for Developing Metamodels
Joseph, V. R., Hung, Y., & Sudjianto, A. (2008) · Journal of Mechanical Design · doi:10.1115/1.2829873 · Cited by 264
Self-citation
Metadata
- Authors
- Qian, Z., Seepersad, C. C., Joseph, V. R., Allen, J. K., & Jeff Wu, C. F.
- Venue
- Journal of Mechanical Design
- Publisher
- ASME International
- Published
- 2005-06-07
- Volume
- 128
- Issue
- 4
- Pages
- 668-677
- ISSN
- 0161-8458 (ISSN-L)
- 1050-0472
- 1528-9001
- OpenAlex
- W4246916037
- Cited by
- 215
- References
- 1
- FWCI
- 3.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.