The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Development and Validation of a Three-Dimensional Finite Element Model of the Pelvic Bone
Open accessAbstract
Due to both its shape and its structural architecture, the mechanics of the pelvic bone are complex. In Finite Element (FE) models, these aspects have often been (over) simplified, sometimes leading to conclusions which did not bear out in reality. The purpose of this study was to develop a more realistic FE model of the pelvic bone. This not only implies that the model has to be three-dimensional, but also that the thickness of the cortical shell and the density distribution of the trabecular bone throughout the pelvic bone have to be incorporated in the model in a realistic way. For this purpose, quantitative measurements were performed on computer tomography scans of several pelvic bones, after which the measured quantities were allocated to each element of the mesh individually. To validate this FE model, two fresh pelvic bones were fitted with strain gages and loaded in a testing machine. Stresses calculated from the strain data of this experiment were compared to the results of a simulation with the developed pelvic FE model.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Zienkiewicz, O. C. (1989) · Cited by 14,802
Mechanical and textural properties of pelvic trabecular bone
Dalstra, M., Huiskes, R., Odgaard, A., & van Erning, L. (1993) · Journal of Biomechanics · doi:10.1016/0021-9290(93)90014-6 · Cited by 358
Self-citationStress distributions in the acetabular region—I. Before and after total joint replacement
Vasu, R., Carter, D. R. P., & Harris, W. H. (1982) · Journal of Biomechanics · doi:10.1016/0021-9290(82)90247-0 · Cited by 127
A new calibration phantom for quantitative computed tomography
Kalender, W. A., & Suess, C. (1987) · Medical Physics · doi:10.1118/1.596013 · Cited by 89
Contact finite element stress analysis of the hip joint
Rapperport, D. J., Carter, D. R. P., & Schurman, D. J. (1985) · Journal of Orthopaedic Research® · doi:10.1002/jor.1100030406 · Cited by 77
A 3D Finite Element Model of Pelvis in Side Impact
Renaudin, F., Guillemot, H., Lavaste, F., Wafa Skalli, E., Lesage, F., & Pecheux, C. (1993) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/933130 · Cited by 35
Pelvic stresses in vitro—I. Malsizing of endoprostheses
Finlay, J. B., Bourne, R. B., Landsberg, R. P. D., & Andreae, P. M. (1986) · Journal of Biomechanics · doi:10.1016/0021-9290(86)90194-6 · Cited by 34
Cited by
Mathematical relationships between bone density and mechanical properties: A literature review
Helgason, B., Perilli, E., Schileo, E., Taddei, F., Brynjólfsson, S., & Viceconti, M. (2008) · Clinical Biomechanics · doi:10.1016/j.clinbiomech.2007.08.024 · Cited by 589
Ferguson, S. J., Bryant, J. T., Ganz, R., & Ito, K. (2000) · Journal of Biomechanics · doi:10.1016/s0021-9290(00)00042-7 · Cited by 455
Prediction of strength and strain of the proximal femur by a CT-based finite element method
Bessho, M., Ohnishi, I., Matsuyama, J., Matsumoto, T., Imai, K., & Nakamura, K. (2007) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2006.08.003 · Cited by 407
Schileo, E., Dall’Ara, E., Taddei, F., Malandrino, A., Schotkamp, T., Baleani, M., & Viceconti, M. (2008) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2008.05.017 · Cited by 372
Subject-Specific Finite Element Model of the Pelvis: Development, Validation and Sensitivity Studies
Anderson, A. E., Peters, C. L., Tuttle, B. D., & Weiss, J. A. (2005) · Journal of Biomechanical Engineering · doi:10.1115/1.1894148 · Cited by 347
Metadata
- Authors
- Dalstra, M., Huiskes, R., & van Erning, L.
- Venue
- Journal of Biomechanical Engineering
- Publisher
- ASME International
- Published
- 1995-08-01
- Volume
- 117
- Issue
- 3
- Pages
- 272-278
- ISSN
- 0148-0731 (ISSN-L)
- 1528-8951
- OpenAlex
- W2149181963
- Cited by
- 303
- References
- 7
- FWCI
- 1.66
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.