Projection Microfabrication of Three-Dimensional Scaffolds for Tissue Engineering
The DOI matches its Crossref record.
Abstract
This article presents a micromanufacturing method for direct projection printing of three-dimensional scaffolds for applications in the field of tissue engineering by using a digital micromirror-array device (DMD) in a layer-by-layer process. Multilayered scaffolds are microfabricated using curable materials through an ultraviolet (UV) photopolymerization process. The prepatterned UV light is projected onto the photocurable polymer solution by creating the “photomask” design with a graphic software. Poly(ethylene glycol) diacrylate is mixed with a small amount of dye (0.3wt%) to enhance the fabrication resolution of the scaffold. The DMD fabrication system is equipped with a purging mechanism to prevent the accumulation of oligomer, which could interfere with the feature resolution of previously polymerized layers. The surfaces of the predesigned multilayered scaffold are covalently conjugated with fibronectin for efficient cellular attachment. Our results show that murine marrow-derived progenitor cells successfully attached to fibronectin-modified scaffolds.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
The upcoming 3D-printing revolution in microfluidics
Bhattacharjee, N., Urrios, A., Kang, S., & Folch, A. (2016) · Lab on a Chip · doi:10.1039/c6lc00163g · Cited by 1,123
Au, A. K., Huynh, W., Horowitz, L. F., & Folch, A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201504382 · Cited by 788
Metadata
- Authors
- Han, L.-H., Mapili, G., Chen, S., & Roy, K.
- Venue
- Journal of Manufacturing Science and Engineering
- Publisher
- ASME International
- Published
- 2008-03-07
- Volume
- 130
- Issue
- 2
- ISSN
- 1087-1357 (ISSN-L)
- 1528-8935
- OpenAlex
- W2099938484
- Cited by
- 110
- References
- 0
- FWCI
- 4.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Projection Microfabrication of Three-Dimensional Scaffolds for Tissue Engineering. https://app.cochat.ai/papers/10.1115/1.2823079
- The paper
- Han, L.-H., Mapili, G., Chen, S., & Roy, K. (2008). Projection Microfabrication of Three-Dimensional Scaffolds for Tissue Engineering. Journal of Manufacturing Science and Engineering. https://doi.org/10.1115/1.2823079
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.