Effect of Involute Contact Ratio on Spur Gear Dynamics
The DOI matches its Crossref record.
Abstract
The influence of involute contact ratio on the torsional vibration behavior of a spur gear pair is investigated experimentally by measuring the dynamic transmission error of several gear pairs using a specially designed gear test rig. Measured forced response curves are presented, and harmonic amplitudes of dynamic transmission error are compared above and below gear mesh resonances for both unmodified and modified gears having various involute contact ratio values. The influence of involute contact ratio on dynamic transmission error is quantified and a set of generalized, experimentally validated design guidelines for the proper selection of involute contact ratio to achieve quite gear systems is presented. A simplified analytical model is also proposed which accurately describes the effects of involute contact ratio on dynamic transmission error.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Application of Tribological Artificial Neural Networks in Machine Elements
Walker, J., Questa, H., Raman, A., Ahmed, M., Mohammadpour, M., Bewsher, S. R., & Offner, G. (2023) · Tribology Letters · doi:10.1007/s11249-022-01673-5 · Cited by 39
“It was found that 600 data points were sufficient to train a relatively accurate ANN for central film prediction; Table 4 Spur gear parameters [46] and operating conditions”
Method
Metadata
- Authors
- Kahraman, A., & Blankenship, G. W.
- Venue
- Journal of Mechanical Design
- Publisher
- ASME International
- Published
- 1999-03-01
- Volume
- 121
- Issue
- 1
- Pages
- 112-118
- ISSN
- 0161-8458 (ISSN-L)
- 1050-0472
- 1528-9001
- OpenAlex
- W2047125371
- Cited by
- 182
- References
- 0
- FWCI
- 9.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.