The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Analytical Stability Prediction and Design of Variable Pitch Cutters
Abstract
An analytical prediction of stability lobes for milling cutters with variable pitch angles is presented. The method requires cutting constants, number of teeth, and transfer function of cutter mounted on the machine tool as inputs to a chatter stability expression. The stability is formulated by transforming time varying directional cutting constants into time invariant constants. Constant regenerative time delay in uniform cutters is transformed into nonuniform multiple regenerative time delay for variable pitch cutters. The chatter free axial depth of cut is solved from the eigenvalues of stability expression, whereas the spindle speed is identified from regenerative phase delays. The proposed technique has been verified with extensive cutting tests and time domain simulations. The practical use of the analytical solution is demonstrated by an optimal tooth spacing design application which increases the chatter free depth of cuts significantly.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Analytical Prediction of Stability Lobes in Milling
Altıntaş, Y., & Budak, E. (1995) · CIRP Annals · doi:10.1016/s0007-8506(07)62342-7 · Cited by 1,955
Self-citationBudak, E., & Altıntaş, Y. (1998) · Journal of Dynamic Systems Measurement and Control · doi:10.1115/1.2801318 · Cited by 366
Self-citationMechanism of Cutting Force and Surface Generation in Dynamic Milling
Montgomery, D., & Altıntaş, Y. (1991) · Journal of Engineering for Industry · doi:10.1115/1.2899673 · Cited by 364
Efficient Simulation Programs for Chatter in Milling
Smith, S., & Tlusty, J. (1993) · CIRP Annals · doi:10.1016/s0007-8506(07)62486-x · Cited by 266
Cited by
Stability and Stabilization of Systems with Time Delay
(2011) · IEEE Control Systems · doi:10.1109/mcs.2010.939135 · Cited by 664
Compensation of state-dependent input delay for nonlinear systems
Bekiaris-Liberis, N., & Krstic, M. (2013) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2012.2208294 · Cited by 229
Metadata
- Authors
- Altıntas¸, Y., Engin, S., & Budak, E.
- Venue
- Journal of Manufacturing Science and Engineering
- Publisher
- ASME International
- Published
- 1999-05-01
- Volume
- 121
- Issue
- 2
- Pages
- 173-178
- ISSN
- 1087-1357 (ISSN-L)
- 1528-8935
- OpenAlex
- W2041835630
- Cited by
- 277
- References
- 4
- FWCI
- 12.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Analytical Stability Prediction and Design of Variable Pitch Cutters. https://app.cochat.ai/papers/10.1115/1.2831201
- The paper
- Altıntas¸, Y., Engin, S., & Budak, E. (1999). Analytical Stability Prediction and Design of Variable Pitch Cutters. Journal of Manufacturing Science and Engineering. https://doi.org/10.1115/1.2831201
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.