The DOI matches its Crossref record.
Delamination During Drilling in Composite Laminates
Abstract
Delamination is the major concern during drilling of composite laminates. Delamination, in addition to reducing the structural integrity of the laminate, also results in poor assembly tolerance and has the potential for long-term performance deterioration. Drilling-induced delamination occurs both at the entrance and at the exit planes. This paper presents an analysis of delamination during drilling. The analysis uses a fracture mechanics approach in which the opening-mode delamination fracture toughness, a material parameter, is used with a plate model of the laminate. The analysis predicts an optimal thrust force (defined as the minimum force above which delamination is initiated) as a function of drilled hole depth. Good agreement is achieved with data obtained from drilling carbon fiber-epoxy laminates. An advantage of the model is that it can predict varying degrees of delamination for other materials, such as glass fiber-epoxy, and for hybrid composites. In addition, the optimal thrust force for no delamination can be used to control a drilling machine with thrust force feedback for maximizing productivity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review of mechanical drilling for composite laminates
Liu, D., Tang, Y., & Cong, W. L. (2012) · Composite Structures · doi:10.1016/j.compstruct.2011.11.024 · Cited by 781
Chen, W.-C. (1997) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(96)00095-8 · Cited by 752
High performance cutting of advanced aerospace alloys and composite materials
M'Saoubi, R., Axinte, D., Soo, S. L., Nobel, C., Attia, H., Kappmeyer, G., Engin, S., & Sim, W.-M. (2015) · CIRP Annals · doi:10.1016/j.cirp.2015.05.002 · Cited by 567
Cutting edge rounding: An innovative tool wear criterion in drilling CFRP composite laminates
Faraz, A., Biermann, D., & Weinert, K. (2009) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2009.08.002 · Cited by 543
Natural fiber–reinforced composites: A review on material, manufacturing, and machinability
Lotfi, A., Li, H., Dao, D. V., & Prusty, G. (2021) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705719844546 · Cited by 499
Delamination formation, evaluation and suppression during drilling of composite laminates: A review
Geng, D., Liu, Y., Shao, Z., Lu, Z., Cai, J., Li, X., Jiang, X., & Zhang, D. (2019) · Composite Structures · doi:10.1016/j.compstruct.2019.02.099 · Cited by 465
The path towards delamination-free drilling of composite materials
Hocheng, H., & Tsao, C. C. (2005) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2005.06.039 · Cited by 449
Self-citationEffects of special drill bits on drilling-induced delamination of composite materials
Hocheng, H., & Tsao, C. C. (2006) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2005.10.004 · Cited by 423
Self-citationGaitonde, V. N., Karnik, S. R., Rubio, J. C., Correia, A. E., Abrão, A. M., & Davim, J. P. (2008) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2007.10.050 · Cited by 410
Krishnaraj, V., Prabukarthi, A., Ramanathan, A., Elanghovan, N., Senthil Kumar, M., Zitoune, R., & Davim, J. P. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.01.007 · Cited by 400
Comprehensive analysis of delamination in drilling of composite materials with various drill bits
Hocheng, H., & Tsao, C. C. (2003) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(03)00749-0 · Cited by 378
Self-citationTsao, C. C., & Hocheng, H. (2004) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2004.02.019 · Cited by 368
Self-citationDelamination in drilling GFR-thermoset composites
Khashaba, U. A. (2004) · Composite Structures · doi:10.1016/s0263-8223(03)00180-6 · Cited by 344
Study of drilling of composite material and aluminium stack
Zitoune, R., Krishnaraj, V., & Collombet, F. (2010) · Composite Structures · doi:10.1016/j.compstruct.2009.10.010 · Cited by 323
A study on the drilling of composite and titanium stacks
Ramulu, M., Branson, T., & Kim, D. (2001) · Composite Structures · doi:10.1016/s0263-8223(01)00071-x · Cited by 318
Factors affecting the machinability of GFR/epoxy composites
El-Sonbaty, I., Khashaba, U. A., & Machaly, T. (2004) · Composite Structures · doi:10.1016/s0263-8223(03)00181-8 · Cited by 316
Effects of hole machining defects on strength and fatigue life of composite laminates
Persson, E., Eriksson, I., & Zackrisson, L. (1997) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(96)00106-6 · Cited by 288
Tsao, C. C., & Hocheng, H. (2008) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2006.04.126 · Cited by 281
Self-citationRawat, S., & Attia, H. (2009) · Wear · doi:10.1016/j.wear.2009.01.031 · Cited by 270
Jia, Z.-Y., Zhang, C., Wang, F.-J., Fu, R., & Chen, C. (2020) · Composite Structures · doi:10.1016/j.compstruct.2019.111786 · Cited by 59
Neseli, S. (2014) · Advances in Mechanical Engineering · doi:10.1155/2014/925382 · Cited by 30
Metadata
- Authors
- Ho-Cheng, H., & Dharan, C. K. H.
- Venue
- Journal of Engineering for Industry
- Publisher
- ASME International
- Published
- 1990-08-01
- Volume
- 112
- Issue
- 3
- Pages
- 236-239
- ISSN
- 0022-0817 (ISSN-L)
- OpenAlex
- W1984705070
- Cited by
- 572
- References
- 0
- FWCI
- 9.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.