The DOI matches its Crossref record.
Phase Change Heat Transfer Enhancement Using Copper Porous Foam
Abstract
A detailed experimental and analytical study has been performed to evaluate how copper porous foam (CPF) enhances the heat transfer performance in a cylindrical solid/liquid phase change thermal energy storage system. The CPF used in this study had a 95% porosity and the phase change material (PCM) was 99% pure eicosane. The PCM and CPF were contained in a vertical cylinder where the temperature at its radial boundary was held constant, allowing both inward freezing and melting of the PCM. Detailed quantitative time-dependent volumetric temperature distributions and melt/freeze front motion and shape data were obtained. As the material changed phase, a thermal resistance layer built up, resulting in a reduced heat transfer rate between the surface of the container and the phase change front. In the freezing analysis, we analytically determined the effective thermal conductivity of the combined PCM/CPF system and the results compared well to the experimental values. The CPF increased the effective thermal conductivity from 0.423W∕mKto3.06W∕mK. For the melting studies, we employed a heat transfer scaling analysis to model the system and develop heat transfer correlations. The scaling analysis predictions closely matched the experimental data of the solid/liquid interface position and Nusselt number.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Hierarchically Structured Porous Materials for Energy Conversion and Storage
Li, Y., Fu, Z., & Su, B. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200591 · Cited by 951
Zhao, C. Y., Lu, W., & Tian, Y. (2010) · Solar Energy · doi:10.1016/j.solener.2010.04.022 · Cited by 757
A review on battery thermal management in electric vehicle application
Xia, G., Cao, L., & Bi, G. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.09.046 · Cited by 641
Preparation and thermal characterization of paraffin/metal foam composite phase change material
Xiao, X., Zhang, P., & Li, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.050 · Cited by 627
Ibrahim, N. I., Al-Sulaiman, F. A., Rahman, S., Yilbas, B. S., & Sahin, A. Z. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.169 · Cited by 580
Metadata
- Authors
- Siahpush, A., O’Brien, J., & Crepeau, J.
- Venue
- Journal of Heat Transfer
- Publisher
- ASME International
- Published
- 2008-05-30
- Volume
- 130
- Issue
- 8
- ISSN
- 0022-1481 (ISSN-L)
- 1528-8943
- OpenAlex
- W2028429433
- Cited by
- 196
- References
- 0
- FWCI
- 9.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Phase Change Heat Transfer Enhancement Using Copper Porous Foam. https://app.cochat.ai/papers/10.1115/1.2928010
- The paper
- Siahpush, A., O’Brien, J., & Crepeau, J. (2008). Phase Change Heat Transfer Enhancement Using Copper Porous Foam. Journal of Heat Transfer. https://doi.org/10.1115/1.2928010
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.