The DOI matches its Crossref record.
Numerical and Experimental Study of Solidification in a Spherical Shell
Abstract
The present study explores numerically and experimentally the process of a phase-change material (PCM) solidification in a spherical shell. At the initial state, the PCM liquid occupies 98.5% of the shell. The upper segment of 1.5% contains air, which flows in as the solidification progresses. In the experiments, a commercially available paraffin wax is used. Its properties are engaged in the numerical simulations. The investigation is performed for solidification in spherical shells of 20 mm, 40 mm, 60 mm, and 80 mm in diameter at the wall uniform temperature, which varied from 10°C to 40°C below the mean solidification temperature of the phase-change material. Transient numerical simulations are performed using the FLUENT 6.2 software and incorporate such phenomena as flow in the liquid phase, volumetric shrinkage due to solidification, and irregular boundary between the PCM and air. The numerical model is validated versus the experimental results. Shrinkage patterns and void formation are demonstrated. Dimensional analysis of the results is performed and presented as the PCM melt fractions versus the product of the Fourier and Stefan numbers. This analysis leads to a generalization that encompasses the cases considered herein.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Melting in a vertical cylindrical tube: Numerical investigation and comparison with experiments
Shmueli, H., Ziskind, G., & Letan, R. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.05.028 · Cited by 436
Self-citationAbdulateef, A. M., Mat, S., Abdulateef, J., Sopian, K., & Al-Abidi, A. A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.07.009 · Cited by 425
CFD applications for latent heat thermal energy storage: a review
Al-abidi, A. A., Bin Mat, S., Sopian, K., Sulaiman, M. Y., & Mohammed, A. T. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.079 · Cited by 318
Hosseini, M. J., Ranjbar, A. A., Sedighi, K., & Rahimi, M. (2012) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2012.07.028 · Cited by 295
Numerical study of melting inside concentric and eccentric horizontal annulus
Darzi, A. R., Farhadi, M., & Sedighi, K. (2012) · Applied Mathematical Modelling · doi:10.1016/j.apm.2011.11.033 · Cited by 288
Metadata
- Authors
- Assis, E., Ziskind, G., & Letan, R.
- Venue
- Journal of Heat Transfer
- Publisher
- ASME International
- Published
- 2008-12-12
- Volume
- 131
- Issue
- 2
- ISSN
- 0022-1481 (ISSN-L)
- 1528-8943
- OpenAlex
- W2063771810
- Cited by
- 162
- References
- 0
- FWCI
- 4.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Numerical and Experimental Study of Solidification in a Spherical Shell. https://app.cochat.ai/papers/10.1115/1.2993543
- The paper
- Assis, E., Ziskind, G., & Letan, R. (2009). Numerical and Experimental Study of Solidification in a Spherical Shell. Journal of Heat Transfer. https://doi.org/10.1115/1.2993543
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.