The DOI matches its Crossref record.
Analysis and Design of a Direct-Drive Arm With a Five-Bar-Link Parallel Drive Mechanism
Abstract
The direct-drive arm that has no gears between motors and their loads have several important advantages including no backlash, small friction, and high mechanical stiffness. The arm mechanism, however, becomes extremely massive, when each motor is directly attached to its joint along a serial linkage mechanism. The complicated dynamics resulting from varying inertia, interactions, and nonlinearities, is also more prominent than that of a robot with gears. This paper describes a lightweight arm mechanism with invariant and decoupled inertia characteristics. Instead of having motors at serial joints, a parallel drive mechanism with a closed-loop five bar linkage is utilized. The dynamic behavior of this mechanism is analyzed and the condition for the elimination of the interactions and nonlinearities in the mass properties is derived. The decoupled and invariant arm dynamics significantly reduces the complexity of controlling the direct-drive arm. In the latter half of the paper, a prototype robot developed on this basis is described. By using high torque brushless motors which were specially designed for the direct-drive robot, top speed and maximum acceleration were increased by an order-of-magnitude to about 10 m/s and 5 G, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Armstrong-Hélouvry, B., Dupont, P., & De Wit, C. C. (1994) · Automatica · doi:10.1016/0005-1098(94)90209-7 · Cited by 2,678
Singularity analysis of closed-loop kinematic chains
Gosselin, C., & Angeles, J. (1990) · IEEE Transactions on Robotics and Automation · doi:10.1109/70.56660 · Cited by 1,743
Estimation of Inertial Parameters of Manipulator Loads and Links
Atkeson, C. G., An, C. H., & Hollerbach, J. M. (1986) · The International Journal of Robotics Research · doi:10.1177/027836498600500306 · Cited by 590
Stable execution of contact tasks using impedance control
Hogan, N. (2005) · Proceedings. 1987 IEEE International Conference on Robotics and Automation · doi:10.1109/robot.1987.1087854 · Cited by 427
On the stability of manipulators performing contact tasks
Hogan, N. (1988) · IEEE Journal on Robotics and Automation · doi:10.1109/56.9305 · Cited by 276
Metadata
- Authors
- Asada, H., & Youcef-Toumi, K.
- Venue
- Journal of Dynamic Systems, Measurement, and Control
- Publisher
- ASME International
- Published
- 1984-09-01
- Volume
- 106
- Issue
- 3
- Pages
- 225-230
- ISSN
- 0022-0434 (ISSN-L)
- 1528-9028
- OpenAlex
- W1964431670
- Cited by
- 189
- References
- 0
- FWCI
- 24.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Analysis and Design of a Direct-Drive Arm With a Five-Bar-Link Parallel Drive Mechanism. https://app.cochat.ai/papers/10.1115/1.3149676
- The paper
- Asada, H., & Youcef-Toumi, K. (1984). Analysis and Design of a Direct-Drive Arm With a Five-Bar-Link Parallel Drive Mechanism. Journal of Dynamic Systems, Measurement, and Control. https://doi.org/10.1115/1.3149676
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.