The Efficiency of Involute Spur Gears
The DOI matches its Crossref record.
Abstract
Approximate equations produced by Trachman |15| are used to predict the coefficient of sliding friction between the gear teeth. These equations apply when the lubrication regime is elastohydrodynamic; this is true during many gear contacts. The equations, which require only certain basic characteristics of the lubricant and the gears, are relatively simple and produce values for the coefficient of friction which are acceptable. The use of this coefficient of friction, together with a calculation for the rolling friction force allows the calculation of instantaneous and overall efficiency of the gear train. Contact ratios greater than one are accounted for and the load is assumed to be shared equally between the pairs of teeth. The computed values show that the load torque has a significant effect on both coefficient of friction and efficiency; as the load increases the coefficient of friction increases and the efficiency decreases. The effect of speed does not, over the small range of computations made, have as much significance as load, although it appears that efficiency will probably increase as the speed increases. Comparison of these predicted results with the few experimental tests which are relevant indicates some support, especially for the load effect.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Prediction of Mechanical Efficiency of Parallel-Axis Gear Pairs
Xu, H., Kahraman, A., Anderson, N. E., & Maddock, D. G. (2007) · Journal of Mechanical Design · doi:10.1115/1.2359478 · Cited by 323
Prediction of mechanical gear mesh efficiency of hypoid gear pairs
Kolivand, M., Li, S., & Kahraman, A. (2010) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2010.06.015 · Cited by 117
Influence of Design Parameters on Mechanical Power Losses of Helical Gear Pairs
LI, S., VAIDYANATHAN, A., HARIANTO, J., & KAHRAMAN, A. (2009) · Journal of Advanced Mechanical Design, Systems, and Manufacturing · doi:10.1299/jamdsm.3.146 · Cited by 69
Im, D., Kim, T., Kim, B.-S., Park, J.-H., Kim, J.-G., & Park, Y.-J. (2025) · Tribology International · doi:10.1016/j.triboint.2025.110597 · Cited by 10
Metadata
- Authors
- Martin, K. F.
- Venue
- Journal of Mechanical Design
- Publisher
- ASME International
- Published
- 1981-01-01
- Volume
- 103
- Issue
- 1
- Pages
- 160-169
- ISSN
- 0161-8458 (ISSN-L)
- OpenAlex
- W2093285308
- Cited by
- 57
- References
- 0
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.