Fast numerical calculations of EHD sliding traction forces: Application to rolling bearings
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Based on analytical calculations assuming isothermal elastohydrodynamic (EHD) lubrication conditions, and on curve-fitting of a thermal correction factor, a new formula is proposed to calculate the sliding traction force developed in a concentrated contact, assuming a nonlinear, viscoelastic lubricant and undirectional sliding. When sliding occurs in the rolling and transverse directions (bidimensional sliding), a simplified numerical method is outlined by which the components of the local shear stress are quickly calculated. The latter method is applied to the calculation of the shear stress and temperature distribution in the ball-raceway contacts of an angular-contact ball bearing. Because of the viscoelastic behavior of the lubricant, a nonzero lateral traction force is obtained.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The dimensionless parameters 𝑈 , 𝑊 , and 𝐺 (see Eq. (3)) have been shown time and time again to provide excellent predictive power for the EHL behavior of the contact [43-46][11,47].”
From Enhancing practical modeling: A neural network approach for locally-resolved prediction of elastohydrodynamic line contacts (2024) · cites this paper as [44]
Citations
Cites
Prediction of Ball Motion in High-Speed Thrust-Loaded Ball Bearings
Gentle, C. R., & Boness, R. J. (1976) · Journal of Lubrication Technology · doi:10.1115/1.3452889 · Cited by 28
Houpert, L. (1984) · Journal of Tribology · doi:10.1115/1.3260941 · Cited by 20
Self-citation
Cited by
Modeling angular contact ball bearing without raceway control hypothesis
Wang, W., Hu, L., Zhang, S., Zhao, Z., & Ai, S. (2014) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2014.08.006 · Cited by 121
Ball Bearing and Tapered Roller Bearing Torque: Analytical, Numerical and Experimental Results
Houpert, L. (2002) · Tribology Transactions · doi:10.1080/10402000208982559 · Cited by 126
Self-citationCAGEDYN: A Contribution to Roller Bearing Dynamic Calculations Part I: Basic Tribology Concepts
Houpert, L. (2009) · Tribology Transactions · doi:10.1080/10402000903132093 · Cited by 73
Self-citationCreju, S., Bercea, I., & Mitu, N. (1995) · Wear · doi:10.1016/0043-1648(94)06551-9 · Cited by 63
Analysis of Double-Row Tapered Roller Bearings, Part I - Model
Bercea, I., Creţu, S., & Nélias, D. (2003) · Tribology Transactions · doi:10.1080/10402000308982622 · Cited by 41
Investigation into the traction coefficient in elastohydrodynamic lubrication
Wang, Y., Yang, B. Y., & Wang, L. Q. (2004) · Tribotest · doi:10.1002/tt.3020110204 · Cited by 39
A dynamic analysis of tapered roller bearings under fully flooded conditions part 2: results
Creţu, S., Mitu, N., & Bercea, I. (1995) · Wear · doi:10.1016/0043-1648(94)06552-7 · Cited by 29
Rolling-Sliding Analysis in Ball Bearing Considering Thermal Effect
Liao, N. T., & Lin, J. F. (2005) · Tribology Transactions · doi:10.1080/05698190500414300 · Cited by 29
“Houpert [ 6 ] developed a formula that proposed to calculate the sliding traction force developed in a concentrated contact, assuming a nonlinear, viscoelastic lubricant and unidirectional sliding.”
BackgroundNélias, D., Legrand, E., Vergne, P., & Mondier, J. B. (2001) · Journal of Tribology · doi:10.1115/1.1399054 · Cited by 21
Kelley, J., Schneider, V., Poll, G., & Marian, M. (2024) · Tribology International · doi:10.1016/j.triboint.2024.109988 · Cited by 20
Thermal analysis of the bone surface induced by laser radiation
Chen, I. I. H., & Saha, S. (1987) · Annals of Biomedical Engineering · doi:10.1007/bf02363565 · Cited by 13
Starvation in Ball Bearing Lubricated by Oil and Air Lubrication System
ITOIGAWA, F., Nakamura, T., & Matsubara, T. (1998) · Tribology series · doi:10.1016/s0167-8922(98)80079-5 · Cited by 12
Cao, W., Wang, J., Pu, W., Zhang, Y., Wu, J., Chu, K., & Wu, H. (2016) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1177/1350650116631453 · Cited by 13
“The updated calculation methods of hydrodynamic force and traction force can be seen in Houpert.10,11,16 The differential equations of motion of the roller and cage are formulated to obtain the approximate rotational speed of the maximum loaded roller and cage.”
MethodInfluentialAn efficient and accurate calculation of traction in elastohydrodynamic contacts
Dama, R., & Chang, L. (1997) · Wear · doi:10.1016/s0043-1648(96)07309-7 · Cited by 11
Die verluste wegen der reibung in Radial-Axial-Kugellagern bei hohen drehzahlen
Gafitanu, M. D., Olaru, D. N., & Cocea, M. C. (1993) · Wear · doi:10.1016/0043-1648(93)90405-b · Cited by 11
Lubrication safety in high‐speed ball‐bearings
Olaru, D. N., & Gafitanu, M. D. (1997) · Lubrication Science · doi:10.1002/ls.3010090404 · Cited by 8
Traction coefficient in a roller-inner ring EHD contact in a jet engine roller bearing
Sottomayor, A., Campos, A. V., & Seabra, J. (1997) · Wear · doi:10.1016/s0043-1648(97)00013-6 · Cited by 11
Cao, W., Wang, J., Pu, W., Zhang, Y., Wu, J., Ren, S., & Long, J. (2017) · Industrial Lubrication and Tribology · doi:10.1108/ilt-03-2016-0055 · Cited by 8
Non-Newtonian EHL model for traction evaluation in a roller-inner ring contact in a roller bearing
Seabra, J., Sottomayor, A., & Campos, A. V. (1996) · Wear · doi:10.1016/0043-1648(95)06775-2 · Cited by 7
Dawoud, M., Beitler, S., & Schwarze, H. (2022) · Journal of Tribology · doi:10.1115/1.4055555 · Cited by 6
Sinha, P., & Prasad, D. (1995) · Acta Mechanica · doi:10.1007/bf01376932 · Cited by 6
“In addition, the high pressure associated with thin film lubrication of rollers and gears gives rise to variations in shear rate which are so rapid that the linear relation between shear stress and the rate of shear ceases to be valid, and the lubricant can no longer be treated as a Newtonian fluid [18]-[ 24 ].”
BackgroundThermal and non-Newtonian analysis of EHD line contacts
Seabra, J., Sottomayor, A., Campos, A. V., & Ferreira, L. A. (1995) · Tribology series · doi:10.1016/s0167-8922(08)70633-3 · Cited by 6
The Influence of Surface Tension on Lubrication Film Thickness and Pressure
Liu, J. P., Zhang, X. Y., & Jia, Q. X. (2010) · Advanced materials research · doi:10.4028/www.scientific.net/amr.136.307 · Cited by 4
Tribological Models for Advanced Ball Bearing Simulation
Houpert, L., Clarke, J., & Penny, C. (2023) · Tribology Transactions · doi:10.1080/10402004.2023.2213470 · Cited by 5
“(36 – 39, 43, 44, 47) Detailed discussion is not repeated here, the authors ’ objective being to describe a set of appropriate relationships to use in their subsequent paper.”
Self-citationHou, Y., Wang, X., Xu, B., Geng, Y., Li, Q., & Yang, D. (2023) · Journal of Tribology · doi:10.1115/1.4062367 · Cited by 4
Thermal and normal squeezing effects in lubrication of rollers by a power-law fluid
Prasad, D., & Chhabra, R. P. (1991) · Wear · doi:10.1016/0043-1648(91)90239-q · Cited by 4
On Kerosene Lubrication of Hybrid Ball Bearings
Paleu, V., & Nélias, D. (2007) · Cited by 3
McCool, J. I. (1990) · Tribology Transactions · doi:10.1080/10402009008981938 · Cited by 3
Kinematics and tribological problems of linear guidance systems in four contact points
Popescu, A., & Olaru, D. N. (2016) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/147/1/012029 · Cited by 2
Effects of contact surface shapes on isothermal rolling traction of skewed disks
Ohta, H., Wada, Y., & Takano, Y. (2025) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1177/13506501251324691 · Cited by 1
QUASI-DYNAMIC EFFECTS IN BALL BEARINGS WITH 2, 3 OR 4 CONTACT POINTS
Rezmires, D., & Racocea, C. (2006) · Cited by 1
Scuffing approach for an angular contact ball bearings
Olaru, D. N., Bujoreanu, C., Creţu, S., Popinceanu, N. G., & Nélias, D. (2000) · HAL · Cited by 2
Angular contact ball bearing modelling with flexible cage
Petuya, K. (2022) · theses.fr (ABES) · doi:10.70675/1f98eb33z5f8fz4200z9753z6614ac0326c9 · Cited by 1
The Influence of Surface Tension on Lubrication Characteristics
Liu, J. P., & Zhang, X. Y. (2010) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.33.627
Study of Traction Properties of Three Space Lubricants Used for Rolling Bearing
Liu, J. P., Zhang, X. Y., & Jia, Q. X. (2010) · Advanced materials research · doi:10.4028/www.scientific.net/amr.136.316
Traction in a simulated EHD roller/ring contact
Seabra, J., Sottomayor, A., & Campos, A. V. (1993) · Tribology series · doi:10.1016/s0167-8922(08)70377-8
Experimental and numerical analysis of thermal elastohydrodynamic contacts
Lu, J. (2019) · Spiral (Imperial College London) · doi:10.25560/80150 · Cited by 1
Metadata
- Authors
- Houpert, L.
- Affiliations
- SKF (Netherlands) (NL)
- Corresponding author
- Houpert, L.
- ORCID
- Houpert, L.
- Venue
- Journal of Tribology
- Publisher
- Wiley
- Published
- 1985-04-01
- Volume
- 107
- Issue
- 2
- Pages
- 234-239
- ISSN
- 0742-4787 (ISSN-L)
- 1528-8897
- OpenAlex
- W2017154239
- Cited by
- 38
- References
- 2
- Citations by year
- 2025: 1 · 2024: 2 · 2023: 2 · 2022: 2 · 2019: 1 · 2017: 1 · 2016: 2 · 2014: 1
- FWCI
- 1.40
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Tribology (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Physical Sciences › Engineering › Mechanical Engineering › Lubricants and Their Additives
- Keywords
- elastohydrodynamic lubrication, rolling bearings, angular contact ball bearings, ball-raceway contact, viscoelastic lubricant, shear stress, temperature distribution, concentrated contacts
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.