Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 952

The DOI matches its Crossref record.

REVIEW—Review of Flow Interference Between Two Circular Cylinders in Various Arrangements

Zdravkovich, M. M.·1977·Journal of Fluids Engineering

Abstract

There are infinite numbers of possible arrangements of two parallel cylinders positioned at right angles to the approaching flow direction. Of the infinite arrangements, two distinct groups may be identified: in one group, the cylinders are in a tandem arrangement, one behind the other at any longitudinal spacing; and in the second group, the cylinders face the flow side by side at any transverse spacing. All other combinations of longitudinal and transverse spacings represent staggered arrangements. The tandem arrangement will be treated first. A critical survey of previous research revealed some “odd” features which had been observed and overlooked by various authors. The discontinuity of vortex shedding implies that a similar discontinuity should be expected for the drag force on both cylinders. The measurements of the front (gap) pressures of the downstream cylinder and the base pressures of both cylinders at various spacings reveal a discontinuous “jump” at some critical spacing. The discontinuity is caused by the abrupt change from one stable flow pattern to another at the critical spacing. A new interpretation is given for the existing data on the drag force for both cylinders. The effects of Reynolds number and surface roughness are treated in some detail. Following this, two cylinders arranged side by side to the approaching flow are considered. All the available data on measured forces are compiled together with additional measurements in the range of intermittent changes of drag and lift forces. The bistable nature of the asymmetric flow pattern around each cylinder produces two alternative values of the drag force coupled with two alternative values of the lift force. The introduction of the interference force coefficient exposes the physical origin of two different forces experienced by the cylinders when arranged side by side. Finally, the least reported arrangement of two staggered cylinders is reviewed. The various arrangements are grouped into classes according to the sign of the lift force, or whether the drag force is greater or less than that for a single cylinder. The measurements of drag and lift forces for various arrangements reveal two different regimes for the lift force. In one regime, the lift force directed toward the wake of the upstream cylinder is due to the entrainment of the flow into the fully developed wake of the upstream cylinder. The lift force in this regime reaches a maximum value when the downstream cylinder is near to the upstream wake boundary. In the second regime, at very small spacings, the lift force becomes very large due to an intense gap flow which displaces the wake of the upstream cylinder. The maximum lift force occurs with the downstream cylinder near to the horizontal axis of the upstream cylinder. A discontinuity in the lift force for some staggered arrangements is found and attributed to the bistable nature of the gap flow.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1115/1.3448871

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 952

Metadata

Authors
Zdravkovich, M. M.
Venue
Journal of Fluids Engineering
Published
1977-12-01
Volume
99
Issue
4
Pages
618-633
ISSN
  • 0098-2202 (ISSN-L)
  • 1528-901X
OpenAlex
W2044892051
Cited by
952
References
0
FWCI
5.89
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: REVIEW—Review of Flow Interference Between Two Circular Cylinders in Various Arrangements. https://app.cochat.ai/papers/10.1115/1.3448871
The paper
Zdravkovich, M. M. (1977). REVIEW—Review of Flow Interference Between Two Circular Cylinders in Various Arrangements. Journal of Fluids Engineering. https://doi.org/10.1115/1.3448871

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.