The DOI matches its Crossref record.
Fully Developed Flow and Heat Transfer in Ducts Having Streamwise-Periodic Variations of Cross-Sectional Area
Abstract
The concepts of fully developed flow and heat transfer have been generalized to accommodate ducts whose cross-sectional area varies periodically in the streamwise direction. The identification of the periodicity characteristics of the velocity components and of a reduced pressure function enables the flow field analysis to be confined to a single isolated module, without involvement with the entrance region problem. A similar modular analysis can be made for the temperature field, but the periodicity conditions are of a different nature depending on the thermal boundary conditions. For uniform wall temperature, profiles of similar shape recur periodically. On the other band, for prescribed wall heat flux which is the same for all modules, the temperature field itself is periodic provided that a linear term related to the bulk temperature change is subtracted. The concepts and solution procedure for the periodic fully developed regime were applied to a heat exchanger configuration consisting of successive ranks of isothermal plate segments placed transverse to the mainflow direction. The computed laminar flow field was found to be characterized by strong blockage effects and massive recirculation zones. The fully developed Nusselt numbers are much higher than those for conventional laminar duct flows and show a marked dependence on the Reynolds number.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Koutsou, C. P., Yiantsios, S. G., & Karabelas, A. J. (2009) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.10.007 · Cited by 294
Zhang, J., Kundu, J., & Manglik, R. M. (2004) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2003.10.006 · Cited by 172
Ismail, L. S., & Velraj, R. (2009) · Numerical Heat Transfer, Part A: Applications · doi:10.1080/10407780903507957 · Cited by 61
Performance investigation of an innovative offset strip fin arrays in compact heat exchangers
Peng, H., Ling, X., & Li, J. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.01.050 · Cited by 59
Development of heat transfer coefficient and friction factor correlations for offset fins using CFD
Chennu, R., & Paturu, P. (2011) · International Journal of Numerical Methods for Heat & Fluid Flow · doi:10.1108/09615531111177732 · Cited by 51
Metadata
- Authors
- Patankar, S. V., Liu, C. H., & Sparrow, E. M.
- Venue
- Journal of Heat Transfer
- Publisher
- ASME International
- Published
- 1977-05-01
- Volume
- 99
- Issue
- 2
- Pages
- 180-186
- ISSN
- 0022-1481 (ISSN-L)
- 1528-8943
- OpenAlex
- W2079397389
- Cited by
- 795
- References
- 0
- FWCI
- 2.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fully Developed Flow and Heat Transfer in Ducts Having Streamwise-Periodic Variations of Cross-Sectional Area. https://app.cochat.ai/papers/10.1115/1.3450666
- The paper
- Patankar, S. V., Liu, C. H., & Sparrow, E. M. (1977). Fully Developed Flow and Heat Transfer in Ducts Having Streamwise-Periodic Variations of Cross-Sectional Area. Journal of Heat Transfer. https://doi.org/10.1115/1.3450666
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.