CoChat
Sign Up
Cited by 135Vibration and Dynamic AnalysisFluid Dynamics and Vibration AnalysisDynamics and Control of Mechanical Systems

The DOI matches its Crossref record.

Mechanics of Pipes Conveying Fluids—Part II: Applications and Fluidelastic Problems

Ibrahim, R. A.·2011·Journal of Pressure Vessel Technology
DOI 10.1115/1.4001270
Open this paper in CoChat — free account

Abstract

This paper is the second part of the two-part review article presenting an overview of mechanics of pipes conveying fluid and related problems such as the fluid-elastic instability under conditions of turbulence in nuclear power plants. In the first part, different types of modeling, dynamic analysis and stability regimes of pipes conveying fluid restrained by elastic or inelastic barriers were described. The dynamic and stability behaviors of pinned-pinned, clamped-clamped, and cantilevered pipes conveying fluid together with curved and articulated pipes were discussed. Other problems such as pipes made of viscoelastic materials and active control of severe pipe vibrations were considered. The first part was closed by conclusions highlighting resolved and nonresolved controversies reported in the literature. The second part will address the problem of fluidelastic instability in single- and two-phase flows and fretting wear in process equipment, such as heat exchangers and steam generators. Connors critical velocity will be discussed as a measure of initiating fluidelastic instability. Vibro-impact of heat exchanger tubes and the random excitation by the cross-flow can produce a progressive damage at the supports through fretting wear or fatigue. Antivibration bar supports used to limit pipe vibrations are described. An assessment of analytical, numerical, and experimental techniques of fretting-wear problem of pipes in heat exchangers will be given. Other topics related to this part include remote impact analysis and parameter identification, pipe damage-induced by pressure elastic waves, the dynamic response and stability of long pipes, marine risers together with pipes aspirating fluid, and carbon nanotubes conveying fluid.

Overview

Integrity signals

Registry

Crossref · 10.1115/1.4001270

Cites

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • The time-varying, aperiodic characteristics of fluid motion, and geometric nonlinear characteristics of piping vibrations need to be considered in the vibration analysis of fluid-conveying pipes.

    “Lastly, the time-varying, aperiodic characteristics of fluid motion, and geometric nonlinear characteristics of piping vibrations need to be considered in the vibration analysis of fluid-conveying pipes [6][7] .”

    From Vibration control of fluid-conveying pipes: a state-of-the-art review (2023) · cites this paper as [6]

  • The flow of internal fluids produces a Coriolis force on fluid-conveying pipes.

    “In transporting fluids, the flow of internal fluids produces a Coriolis force on fluid-conveying pipes [6][7] .”

    From Vibration control of fluid-conveying pipes: a state-of-the-art review (2023) · cites this paper as [6]

Citations

Cites

No references could be resolved yet.

Research works printed but not linked: 301

  1. Price, An Investigation on the Use of Connors’ Equation to Predict Fluidelastic Instability in Cylinder Arrays, ASME J. Pressure Vessel Technol., 123, 448, 10.1115/1.1403445 · DOI
  2. Connors, Fluidelastic Vibration of Tube Arrays Excited by Cross-Flow, 42
  3. Connors, Flow-Induced Vibration and Wear of Steam Generator Tubes, Nucl. Technol., 55, 311, 10.13182/NT55-311 · DOI
  4. Weaver, The Cross-Flow Response of a Tube Array in Water—A Comparison With the Same Array in Air, ASME J. Pressure Vessel Technol., 104, 139, 10.1115/1.3264195 · DOI
  5. Price, A Review of Theoretical Models for Fluidelastic Instability in Cross-Flow, J. Fluids Struct., 9, 463, 10.1006/jfls.1995.1028 · DOI
  6. Connors, Fluidelastic Vibration of Heat Exchanger Tube Arrays, 10.1115/1.3453921 · DOI
  7. Païdoussis, A Review of Flow-Induced Vibrations in Reactors and Reactor Components, Nucl. Eng. Des., 74, 31, 10.1016/0029-5493(83)90138-3 · DOI
  8. Païdoussis, Real-Life Experiences With Flow-Induced Vibration, J. Fluids Struct., 22, 741, 10.1016/j.jfluidstructs.2006.04.002 · DOI
  9. Chen, Guidelines for the Instability Flow Velocity of Tube Arrays in Cross-Flow, J. Sound Vib., 93, 439, 10.1016/0022-460X(84)90340-7 · DOI
  10. Païdoussis, Dynamics of a Pipe Aspirating Fluid, Such as Might Be Used in Ocean Mining, ASME J. Energy Resour. Technol., 107, 250, 10.1115/1.3231185 · DOI
  11. Weaver, A Review of Cross-Flow Induced Vibrations in Heat Exchanger Tube Arrays, J. Fluids Struct., 2, 73, 10.1016/S0889-9746(88)90137-5 · DOI
  12. Pettigrew, Fluid-Elastic Instability of Heat Exchanger Tube Bundles: Review and Design Recommendations, ASME J. Pressure Vessel Technol., 113, 242, 10.1115/1.2928752 · DOI
  13. Price, Current-Induced Fluidelastic Instabilities of a Multi-Tube Flexible Riser: Theoretical Results and Comparison With Experiments, ASME J. Offshore Mech. Arct. Eng., 115, 206, 10.1115/1.2920113 · DOI
  14. Schröder, New Design Recommendations for Fluidelastic Instability in Heat Exchanger Tube Bundles, J. Fluids Struct., 13, 361, 10.1006/jfls.1999.0208 · DOI
  15. Ishihara, Study on Influence of Tube Arrays on Fluid Elastic Instability, Trans. Japan Soc. Mech. Eng. Part C, 75, 541, 10.1299/kikaic.75.541 · DOI
  16. Roberts, B. W. , 1962, “Low frequency, Self-Excited Vibration in a Row of Circular Cylinders Mounted in an Airstream,” Ph.D. thesis, University of Cambridge, Cambridge, UK.
  17. Blevins, Fluidelastic Whirling of a Tube Row, ASME J. Pressure Vessel Technol., 98, 263
  18. Whiston, Whirling Instabilities in Heat Exchanger Tube Arrays, J. Sound Vib., 81, 1, 10.1016/0022-460X(82)90175-4 · DOI
  19. Halle, Shell Side Water Flow-Induced Tube Vibration in Heat Exchanger Configurations With Tube Pitch-to-Diameter Ratio of 1.42, ASME J. Pressure Vessel Technol., 111, 441, 10.1115/1.3265702 · DOI
  20. Pettigrew, Vibration Analysis of Heat Exchanger and Steam Generator Designs, Nucl. Eng. Des., 48, 97, 10.1016/0029-5493(78)90211-X · DOI
  21. Chen, Some Issues Concerning Fluid-Elastic Instability of a Group of Circular Cylinders in Cross-Flow, ASME J. Pressure Vessel Technol., 111, 507, 10.1115/1.3265709 · DOI
  22. Chen, Instability Mechanisms and Stability Criteria of a Group of Circular Cylinders Subjected to Cross-Flow, Part 1: Theory, ASME J. Vib., Acoust., Stress, Reliab. Des., 105, 51, 10.1115/1.3269066 · DOI
  23. Chen, Instability Mechanisms and Stability Criteria of a Group of Circular Cylinders Subjected to Cross-Flow, Part 2: Numerical Results and Discussions, ASME J. Vib., Acoust., Stress, Reliab. Des., 105, 253, 10.1115/1.3269095 · DOI
  24. Axisa, Random Excitation of Heat Exchanger Tubes by Cross-Flows, J. Fluids Struct., 4, 321, 10.1016/S0889-9746(05)80018-0 · DOI
  25. Eisinger, Numerical Simulation of Cross-Flow-Induced Fluidelastic Vibration of Tube Arrays and Comparison With Experimental Results, ASME J. Pressure Vessel Technol., 117, 31, 10.1115/1.2842087 · DOI
  26. Violette, Fluidelastic Instability of an Array of Tubes Preferentially Flexible in the Flow Direction Subjected to Two-Phase Cross-Flow, ASME J. Pressure Vessel Technol., 128, 148, 10.1115/1.2138064 · DOI
  27. Khosravian, Computational Modeling of the Flow of Viscous Fluids in Carbon Nanotubes, J. Phys. D: Appl. Phys., 40, 7046, 10.1088/0022-3727/40/22/027 · DOI
  28. Parrondo, Fluidelastic Instability in a Tube Array Subjected to Partial Admission Water Cross-Flow, J. Fluids Struct., 11, 159, 10.1006/jfls.1996.0071 · DOI
  29. Savkar, Flow-Induced Vibrations in Heat Exchangers—An Overview, 433
  30. Chen, A General Theory for Dynamic Instability for Tube Arrays in Cross-Flow, J. Fluids Struct., 1, 35, 10.1016/S0889-9746(87)90170-8 · DOI
  31. Chen, Fluid Excitation Forces Acting on a Square Tube Array, ASME J. Fluids Eng., 109, 415, 10.1115/1.3242682 · DOI
  32. Weaver, The Effect of Platen Fins on the Flow-Induced Vibrations of an In-Line Tube Array, ASME J. Pressure Vessel Technol., 123, 437, 10.1115/1.1408303 · DOI
  33. Feenstra, Fluid-Elastic Instability in a Tube Array Subjected to Uniform And Jet Flow, ASME J. Pressure Vessel Technol., 126, 269, 10.1115/1.1689356 · DOI
  34. Yetisir, An Unsteady Theory for Fluidelastic Instability in an Array of Flexible Tubes in Cross-Flow, Part 1: Theory, J. Fluids Struct., 7, 751, 10.1006/jfls.1993.1044 · DOI
  35. Yetisir, An Unsteady Theory for Fluidelastic Instability in an Array of Flexible Tubes in Cross-Flow, Part II: Results and Comparison With Experiments, J. Fluids Struct., 7, 767, 10.1006/jfls.1993.1045 · DOI
  36. Caillaud, Measurement of Critical Velocities for Fluidelastic Instability Using Vibration Control, ASME J. Vibr. Acoust., 122, 341, 10.1115/1.1286206 · DOI
  37. Caillaud, Active Vibration Control for the Measurement of Fluidelastic Effects, ASME J. Pressure Vessel Technol., 125, 165, 10.1115/1.1561451 · DOI
  38. Ichioka, Research on Fluidelastic Vibration of Cylinder Arrays by Computational Fluid Dynamics (1st Report, Analysis on Two Cylinders and a Cylinder Row), Trans. Japan Soc. Mech. Eng. Part B, 61, 503, 10.1299/kikaib.61.503 · DOI
  39. Lam, Simulation of Cross-Flow-Induced Vibration of Cylinder Arrays by Surface Vorticity Method, J. Fluids Struct., 22, 1113, 10.1016/j.jfluidstructs.2006.03.004 · DOI
  40. Rzentkowski, An Effect of Turbulence on Fluid-Elastic Instability in Tube Bundles: A Nonlinear Analysis, J. Fluids Struct., 12, 561, 10.1006/jfls.1998.0155 · DOI
  41. Weaver, Flow-Induced Vibrations in Power and Process Plant Components Progress and Prospects, ASME J. Pressure Vessel Technol., 122, 339, 10.1115/1.556190 · DOI
  42. Price, Fluidelastic Behavior of a Normal Triangular Array Subject to Cross-Flow, J. Fluids Struct., 5, 259, 10.1016/0889-9746(91)90485-8 · DOI
  43. Lever, A Theoretical Model for the Fluidelastic Instability in Heat Exchanger Tube Bundles, ASME J. Pressure Vessel Technol., 104, 147, 10.1115/1.3264196 · DOI
  44. Lever, On the Stability of Heat Exchanger Tube Bundles. I. Modified Theoretical Model, J. Sound Vib., 107, 375, 10.1016/S0022-460X(86)80114-6 · DOI
  45. Lever, On the Stability of Heat Exchanger Tube Bundles. II. Numerical Results and Comparison With Experiments, J. Sound Vib., 107, 393, 10.1016/S0022-460X(86)80115-8 · DOI
  46. Ziada, Flow Periodicity and Acoustic Resonance in Parallel Triangle Tube Bundles, J. Fluids Struct., 14, 197, 10.1006/jfls.1999.0259 · DOI
  47. Mureithi, Fluidelastic Instability Tests on an Array of Tubes Preferentially Flexible in the Flow Direction, J. Fluids Struct., 21, 75, 10.1016/j.jfluidstructs.2005.03.010 · DOI
  48. Granger, An Improvement to the Quasi-Steady Model With Application to Cross-Flow-Induced Vibration of Tube Array, J. Fluid Mech., 320, 163, 10.1017/S0022112096007495 · DOI
  49. Price, Fluidelastic Instability of a Double Row of Circular Cylinders Subject to Cross-Flow, ASME J. Vib., Acoust., Stress, Reliab. Des., 105, 59, 10.1115/1.3269067 · DOI
  50. Price, An Improved Mathematical Model for the Stability of Cylinder Rows Subject to Cross-Flow, J. Sound Vib., 97, 615, 10.1016/0022-460X(84)90512-1 · DOI
  51. Price, A Constrained-Mode Analysis of the Fluidelastic Instability of a Double Row of Flexible Circular Cylinders Subject to Cross-Flow: A Theoretical Investigation of System Parameters, J. Sound Vib., 105, 121, 10.1016/0022-460X(86)90225-7 · DOI
  52. Meskell, A New Model for Damping Controlled Fluidelastic Instability in Heat Exchanger Tube Arrays, Proc. Inst. Mech. Eng., A, 223, 361, 10.1243/09576509JPE700 · DOI
  53. Meskell, Investigation of the Nonlinear Behavior of Damping Controlled Fluidelastic Instability in a Normal Triangular Tube Array, J. Fluids Struct., 18, 573, 10.1016/j.jfluidstructs.2003.08.013 · DOI
  54. Mahon, Interaction Between Acoustic Resonance and Fluidelastic Instability in a Normal Triangular Tube Array, ASME J. Pressure Vessel Technol., 131, 011303, 10.1115/1.3006894 · DOI
  55. Mahon, Investigation of the Underlying Cause of the Interaction Between Acoustic Resonance and Fluidelastic Instability in Normal Triangular Tube Arrays, J. Sound Vib., 324, 91, 10.1016/j.jsv.2009.01.045 · DOI
  56. Chen, Tube Vibration in a Half-Scale Sector Model of a Helical Tube Steam Generator, J. Sound Vib., 91, 539, 10.1016/0022-460X(83)90832-5 · DOI
  57. Au-Yang, Critical Velocity of a Nonlinearly Supported Multispan Tube Bundle, ASME J. Pressure Vessel Technol., 129, 535, 10.1115/1.2748836 · DOI
  58. Reichel, Simulation of Tube Bundle Vibrations: A Numerical 3D-Method, 10.1115/PVP2009-77530 · DOI
  59. Kassera, V. , 1996, “Development of a Numerical Calculation Tool for Vibrations of Tube Bundles in Cross-Flow,” Ph.D. thesis, Institute for Pressure Vessel and Plant Design, Technical University of Munich, Germany, in German.
  60. Kassera, Simulation of Tube Bundle Vibrations Induced by Cross-Flow, J. Fluids Struct., 11, 909, 10.1006/jfls.1997.0114 · DOI
  61. Lin, Simulation of Flow Induced Vibrations of Tube Bundle in Cross-Flow, Chin. J. Mech., Ser. A, 17, 139
  62. Gillen, Numerical Analysis Of Fluidelastic Instability In A Normal Triangular Tube Array, 10.1115/PVP2009-77806 · DOI
  63. Païdoussis, Dynamics of Flexible Slender Cylinder in Axial Flow, Part 1: Theory, J. Fluid Mech., 26, 717, 10.1017/S0022112066001484 · DOI
  64. Païdoussis, Dynamics of Flexible Slender Cylinder in Axial Flow, Part 2: Experiments, J. Fluid Mech., 26, 737, 10.1017/S0022112066001496 · DOI
  65. Païdoussis, Experiments on Fluidelastic Instability of Cylinder Clusters in Axial Flow, ASME J. Fluids Eng., 104, 342, 10.1115/1.3241846 · DOI
  66. Païdoussis, Stability of a Cluster of Flexible Cylinders in Bounded Axial Flow, ASME J. Appl. Mech., 44, 401, 10.1115/1.3424091 · DOI
  67. Païdoussis, Dynamics of Flexible Cylinders in Axisymmetrically Confined Axial Flow, ASME J. Appl. Mech., 46, 37, 10.1115/1.3424525 · DOI
  68. Païdoussis, Dynamics of a Cluster of Flexibly Interconnected Cylinders, Part 2: In Vacuum, ASME J. Appl. Mech., 50, 421, 10.1115/1.3167054 · DOI
  69. Païdoussis, Dynamics of a Cluster of Flexibly Interconnected Cylinders, Part 2: In Axial Flow, ASME J. Appl. Mech., 50, 429, 10.1115/1.3167055 · DOI
  70. Vendhan, Stability Characteristics of Slender Flexible Cylinders in Axial Flow by the Finite Element Method, J. Sound Vib., 208, 587, 10.1006/jsvi.1997.1192 · DOI
  71. Païdoussis, The Dynamics of Clusters of Flexible Cylinders in Axial Flow: Theory and Experiments, J. Sound Vib., 65, 391, 10.1016/0022-460X(79)90624-2 · DOI
  72. Païdoussis, Flow-Induced Vibrations in Nuclear Reactors and Heat Exchangers: Practical Experiences and State of Knowledge, 1
  73. Païdoussis, Fluidelastic Vibration of Cylinder Arrays in Axial and Cross-Flow: State of the Art, J. Sound Vib., 76, 329, 10.1016/0022-460X(81)90516-2 · DOI
  74. Païdoussis, Fluid-Structure Interactions: Slender Structures and Axial Flow, 10.1017/CBO9780511760792 · DOI
  75. Modarres-Sadeghi, A Nonlinear Model for an Extensible Slender Cylinder Subjected to Axial Flow, J. Fluids Struct., 21, 609, 10.1016/j.jfluidstructs.2005.02.012 · DOI
  76. Modarres-Sadeghi, Experiments on Vertical Slender Flexible Cylinders Clamped at Both Ends and Subjected to Axial Flow, Philos. Trans. R. Soc. London, Ser. A, 366, 1275, 10.1098/rsta.2007.2131 · DOI
  77. Hara, Two-Phase Flow-Induced Vibrations in a Horizontal Piping System, Bull. JSME, 20, 419, 10.1299/jsme1958.20.419 · DOI
  78. Pettigrew, Two-Phase Flow Induced Vibration: An Overview, ASME J. Pressure Vessel Technol., 116, 233, 10.1115/1.2929583 · DOI
  79. Pettigrew, Flow-Induced Vibration: Recent Findings and Open Questions, Nucl. Eng. Des., 185, 249, 10.1016/S0029-5493(98)00238-6 · DOI
  80. Pettigrew, Flow-Induced Vibration and Related Technologies in Nuclear Components, Nucl. Eng. Des., 131, 81, 10.1016/0029-5493(91)90319-D · DOI
  81. Khushnood, A Review of Heat Exchanger Tube Bundle Vibrations in Two-Phase Cross-Flow, Nucl. Eng. Des., 230, 233, 10.1016/j.nucengdes.2003.11.024 · DOI
  82. Goyder, Flow-Induced Vibration in Heat Exchangers, Chem. Eng. Res. Des., 80, 226, 10.1205/026387602753581971 · DOI
  83. Marn, On Analysis of Fluidelastic Instability in Air-Water Mixture, ASME J. Pressure Vessel Technol., 118, 188, 10.1115/1.2842179 · DOI
  84. Joo, Y. , 1994, “Experimental Study of Fluidelastic Instability and Draft Force on a Tube in Two-Phase Cross-Flow, Ph.D. thesis, University of California, Los Angeles. · DOI
  85. Joo, On the Mechanism of Fluidelastic Instability of a Tube Placed in an Array Subjected to Two-Phase Cross-Flow, ASME J. Fluids Eng., 117, 706, 10.1115/1.2817326 · DOI
  86. Nakamura, Correlation Based Fluidelastic Analysis of Tube Arrays in Two-Phase Flow, JSME Int. J., Ser. B, 44, 213, 10.1299/jsmeb.44.213 · DOI
  87. Nakamura, Analysis of Impact-Vibration Characteristics at the Support of Tube by Modal Method, Trans JSME Part C, 55, 1878, 10.1299/kikaic.55.1878 · DOI
  88. Nakamura, Study on the Characteristics of Fluid-Elastic Vibration of a Tube Array, Trans JSME Part C, 56, 1680, 10.1299/kikaic.56.1680 · DOI
  89. Nakamura, Study on the Vibrational Characteristics of a Tube Array Caused by Two-Phase Flow, 1: Random Vibration, ASME J. Pressure Vessel Technol., 114, 472, 10.1115/1.2929257 · DOI
  90. Nakamura, Study on the Vibrational Characteristics of a Tube Array Caused by Two-Phase Flow. 2. Fluidelastic Vibration, ASME J. Pressure Vessel Technol., 114, 479, 10.1115/1.2929258 · DOI
  91. Romberg, Influence of Upstream Turbulence on the Fluidelastic Instability of a Parallel Triangular Tube Bundle, J. Fluids Struct., 12, 153, 10.1006/jfls.1997.0124 · DOI
  92. Rottmann, Influence of Upstream Turbulence on the Fluidelastic Instability of a Parallel Triangular Tube Bundle, J. Fluids Struct., 18, 595, 10.1016/j.jfluidstructs.2003.07.013 · DOI
  93. Moran, Damping Measurements in Tube Bundles Subjected to Two-Phase Cross-Flow, 10.1115/PVP2006-ICPVT-11-93431 · DOI
  94. Pettigrew, The Effects of Tube Bundle Geometry on Vibration in Two-Phase Cross-Flow, ASME J. Pressure Vessel Technol., 123, 414, 10.1115/1.1388236 · DOI
  95. Pettigrew, Vibration Behavior of Rotated Triangular Tube Bundles in Two-Phase Cross-Flows, ASME J. Pressure Vessel Technol., 124, 144, 10.1115/1.1462045 · DOI
  96. Monette, Fluidelastic Instability of Flexible Tubes Subjected to Two-Phase Internal Flow, J. Fluids Struct., 19, 943, 10.1016/j.jfluidstructs.2004.06.003 · DOI
  97. Pettigrew, Detailed Flow and Force Measurements in a Rotated Triangular Tube Bundle Subjected to Two-Phase Cross-Flow, J. Fluids Struct., 20, 567, 10.1016/j.jfluidstructs.2005.02.007 · DOI
  98. Feenstra, Fluidelastic Instability of a Tube Array Subjected to Two-Phase R-11 Cross-Flow, J. Fluids Struct., 9, 747, 10.1006/jfls.1995.1042 · DOI
  99. Feenstra, Modeling Two-Phase Flow-Excited Damping and Fluidelastic Instability in Tube Arrays, J. Fluids Structures, 16, 811, 10.1006/jfls.2002.0442 · DOI
  100. Joly, Effect of Angle of Attack on the Fluidelastic Instability of a Tube Bundle Subjected to Cross-Flow, 10.1115/PVP2009-77052 · DOI
  101. Hwang, Ligament Rupture Pressure of Fretted SG Tubes of PWRS, 10.1115/ICONE14-89211 · DOI
  102. Pettigrew, Vibration of Tube Bundles in Two-Phase Cross-Flow. Part 1: Hydrodynamic Mass and Damping, ASME J. Pressure Vessel Technol., 111, 466, 10.1115/1.3265705 · DOI
  103. Pettigrew, Vibration of Tube Bundles in Two-Phase Cross-Flow. Part 2: Fluid-Elastic Instability, ASME J. Pressure Vessel Technol., 111, 478, 10.1115/1.3265706 · DOI
  104. Taylor, Vibration of Tube Bundles in Two-Phase Cross-Flow, III: Turbulence-Induced Excitation, ASME J. Pressure Vessel Technol., 111, 488, 10.1115/1.3265707 · DOI
  105. Gravelle, Damping of Tubes Due to Internal Two-Phase Flow, J. Fluids Struct., 23, 447, 10.1016/j.jfluidstructs.2006.09.008 · DOI
  106. Pettigrew, Vibration of a Tube Bundle in Two-Phase Freon Cross-Flow, ASME J. Pressure Vessel Technol., 117, 321, 10.1115/1.2842130 · DOI
  107. Mann, Flow-Induced Vibration of Tube Bundles Subjected to Single- and Two-Phase Cross-Flow, 603
  108. Suzaya, Advanced Estimation of Fluidelastic Instability of U-Bend Tube Bundles of Steam Generator (1st Report, Tube Array Test And Thermal-Hydraulic Analysis, Trans. Japan Soc. Mech. Eng. Part B, 68, 1235
  109. Nakamura, Dynamics of an In-Line Tube Array Subjected to Steam-Water Cross-Flow, Part I: Two-Phase Damping and Added Mass, J. Fluids Struct., 16, 123, 10.1006/jfls.2001.0406 · DOI
  110. Nakamura, Advanced Estimation on Fluidelastic Instability of U-Bend Tube Bundle of Steam Generator (3rd Report, Advanced Estimated Method), Trans. Japan Soc. Mech. Eng. Part C, 68, 1073
  111. Mureithi, Dynamics of an In-Line Tube Array Subjected to Steam-Water Cross-Flow, Part II: Unsteady Fluid Forces, J. Fluids Struct., 16, 137, 10.1006/jfls.2001.0407 · DOI
  112. Hirota, Dynamics of an In-Line Tube Array Subjected to Steam-Water Cross-Flow, Part III: Fluidelastic Instability Tests and Comparison With Theory, J. Fluids Struct., 16, 153, 10.1006/jfls.2001.0408 · DOI
  113. Rogers, On the Dynamic Spatial Response of a Heat Exchanger Tube With Intermittent Baffle Contacts, Nucl. Eng. Des., 36, 81, 10.1016/0029-5493(76)90144-8 · DOI
  114. Rogers, Factors Associated With Support Plate Forces Due to Heat Exchanger Tube Vibratory Contact, Nucl. Eng. Des., 44, 247, 10.1016/0029-5493(77)90031-0 · DOI
  115. Nguyen, Impact Behavior of an Oscillator With Limiting Stops, Part I: A Parametric Study, J. Sound Vib., 109, 293, 10.1016/S0022-460X(86)80010-4 · DOI
  116. Nguyen, Impact Behavior of an Oscillator With Limiting Stops. II. Dimensionless Design Parameters, J. Sound Vib., 109, 309, 10.1016/S0022-460X(86)80011-6 · DOI
  117. Axisa, Overview of Numerical Methods for Predicting Flow-Induced Vibration, ASME J. Pressure Vessel Technol., 110, 6, 10.1115/1.3265570 · DOI
  118. Laggiard, One-Dimensional Bimodal Model of Vibration and Impacting of Instrument Tubes in a Boiling Water Reactor, Nucl. Sci. Eng., 115, 62, 10.13182/NSE93-A35523 · DOI
  119. Wu, Probabilistic Analysis of Fluidelastic Instability Controlled by Inactive Supports, J. Tsinghua University, 33, 94
  120. Antunes, J. , 1986, “Contribution a’ I’Etude des Vibrations de Faiseaux de Tubes en Ecoulement Transversal,” Ph.D. thesis, l’Universite´ de Paris VI, France.
  121. Antunes, Coulomb Friction Modeling in Numerical Simulations of Vibration and Wear Work Rate of Multi-Span Heat Exchangers, J. Fluids Struct., 4, 287, 10.1016/S0889-9746(05)80016-7 · DOI
  122. Antunes, Experiments on Tube/Support Interaction With Feedback-Controlled Instability, ASME J. Pressure Vessel Technol., 114, 23, 10.1115/1.2929008 · DOI
  123. Sauvé, Impact Simulation Process Equipment Tubes and Support Plates—A Numerical Algorithm, ASME J. Pressure Vessel Technol., 109, 70, 10.1115/1.3264858 · DOI
  124. Lin, Estimation of Clearances and Impact Forces Using Vibro-Impact Response: Sinusoidal Excitation, J. Sound Vib., 157, 485, 10.1016/0022-460X(92)90529-7 · DOI
  125. Lin, Estimation of Clearances and Impact Forces Using Vibro-Impact Response: Random Excitation, J. Sound Vib., 163, 407, 10.1006/jsvi.1993.1178 · DOI
  126. Lin, Extension of Clearance and Impact Force Estimation Approaches to a Beam-Stop System, J. Sound Vib., 163, 423, 10.1006/jsvi.1993.1179 · DOI
  127. Peterka, Impact Interaction of Two Heat Exchanger Tubes, 393
  128. Païdoussis, Three Routes to Chaos for a Three-Degree-of-Freedom Articulated Cylinder System Subjected to Annular Flow and Impacting on the Outer Pipe, Nonlinear Dyn., 7, 429, 10.1007/BF00121107 · DOI
  129. Cai, Chaotic Vibrations of Nonlinearly Supported Tubes in Cross-Flow, ASME J. Pressure Vessel Technol., 115, 128, 10.1115/1.2929506 · DOI
  130. Fricker, Vibro-Impact Behavior of Fluid-Elastically Unstable Heat Exchanger Tubes With Support Clearances, 129
  131. Fricker, Numerical Analysis of the Fluid-Elastic Vibration of a Steam Generator Tube With Loose Supports, J. Fluids Struct., 6, 85, 10.1016/0889-9746(92)90057-A · DOI
  132. Chen, S. S., Zhu, S., and Cai, Y., 1994, “Experiment on Fluidelastic Instability of Loosely Supported Tube Arrays in Cross-Flow,” Argonne National Laboratory Report No. ANL/ET/CP-81075. · DOI
  133. Chen, Experiment of Chaotic Vibration of Loosely Supported Tube Rows in Cross-Flow, ASME J. Pressure Vessel Technol., 117, 204, 10.1115/1.2842113 · DOI
  134. Zhou, Simulation of Two-Dimensional Squeeze Film and Solid Contact Forces Acting on a Heat Exchanger Tube, J. Sound Vib., 203, 621, 10.1006/jsvi.1996.0870 · DOI
  135. Hassan, Friction Modeling of Preloaded Tube Contact Dynamics, Nucl. Eng. Des., 235, 2349, 10.1016/j.nucengdes.2005.05.004 · DOI
  136. Fisher, Simulation of Tube-to-Support Dynamic Interaction in Heat Exchanger Equipment, ASME J. Pressure Vessel Technol., 111, 378, 10.1115/1.3265694 · DOI
  137. Fisher, Measurement of Tube-to-Support Dynamic Forces in Fretting-Wear Rigs, ASME J. Pressure Vessel Technol., 111, 385, 10.1115/1.3265695 · DOI
  138. Fisher, Experimental Fretting-Wear Studies of Steam Generator Materials, ASME J. Pressure Vessel Technol., 117, 312, 10.1115/1.2842129 · DOI
  139. Knudsen, Vibro-Impact Dynamics of a Periodically Forced Beam, ASME J. Pressure Vessel Technol., 122, 210, 10.1115/1.556175 · DOI
  140. Knudsen, Dynamic Stability of Weakly Damped Oscillators With Elastic Impacts and Wear, J. Sound Vib., 263, 175, 10.1016/S0022-460X(02)01104-5 · DOI
  141. Knudsen, Impact Oscillations and Wear of Loosely Supported Rod Subject to Harmonic Load, J. Sound Vib., 278, 1025, 10.1016/j.jsv.2003.10.060 · DOI
  142. De Langre, The Numerical Prediction of Vibrations in Tube Bundles Induced Cross-Flow Turbulence, 253
  143. Cha, Experimental Study on Impact/Fretting Wear in Heat Exchanger Tubes, ASME J. Pressure Vessel Technol., 109, 265, 10.1115/1.3264862 · DOI
  144. Antunes, Remote Identification of Impact Forces on Loosely Supported Tubes: Part 2-Complex Vibro-Impact Motions, J. Sound Vib., 215, 1043, 10.1006/jsvi.1998.1619 · DOI
  145. Whiston, Remote Impact Analysis by Use of Propagated Acceleration Signals, I: Theoretical Methods, J. Sound Vib., 97, 35, 10.1016/0022-460X(84)90465-6 · DOI
  146. Jordan, Remote Impact Analysis by use of Propagated Acceleration Signals, II: Comparison Between Theory and Experiments, J. Sound Vib., 97, 53, 10.1016/0022-460X(84)90466-8 · DOI
  147. De Araújo, Remote Identification of Impact Forces on Loosely Supported Tubes. I. Basic Theory and Experiments, J. Sound Vib., 215, 1015, 10.1006/jsvi.1998.1618 · DOI
  148. Paulino, Remote Identification of Impact Forces on Loosely Supported Tubes: Analysis of Multi-Supported Systems, ASME J. Pressure Vessel Technol., 121, 61, 10.1115/1.2883668 · DOI
  149. Antunes, Blind Identification of Impact Forces From Multiple Remote Vibratory Measurements, Int. J. Nonlinear Sci. Numer. Simul., 2, 1, 10.1515/IJNSNS.2001.2.1.1 · DOI
  150. Lim, Nonlinear dynamic Analysis of a Cantilever Tube Conveying Fluid With System Identification, KSME J. Mech. Sci. Tech., 17, 1994, 10.1007/BF02982439 · DOI
  151. Barsamian, Flow Visualization of Inlined/Staggered Tube Bundles in Cross-Flow Using Large-Eddy Simulation, Trans. Am. Nucl. Soc., 71, 541
  152. Hassan, Simulation of Fluidelastic Vibrations of Heat Exchanger Tubes With Loose Supports, 10.1115/PVP2006-ICPVT-11-93899 · DOI
  153. Wang, Random Response Analysis of Flow-Induced Vibration in Heat Exchangers, J. Vibration and Shock, 25, 142
  154. Taylor, Random Excitation Forces in Tube Bundles Subjected to Two-Phase Cross-Flow, ASME J. Pressure Vessel Technol., 118, 265, 10.1115/1.2842189 · DOI
  155. Taylor, Random Excitation Forces in Heat Exchanger Tube Bundles, ASME J. Pressure Vessel Technol., 122, 509, 10.1115/1.1286040 · DOI
  156. Pettigrew, Vibration Analysis of Shell-and-Tube Heat Exchangers: An Overview—Part 2: Vibration Response, Fretting-Wear, Guidelines, J. Fluids Struct., 18, 485, 10.1016/j.jfluidstructs.2003.08.008 · DOI
  157. Weaver, The Effect of Flat Bar Supports on the Cross-Flow Induced Response of Heat Exchanger U-Tubes, ASME J. Eng. Power, 105, 775, 10.1115/1.3227481 · DOI
  158. Mohany, Flow-Induced Vibration and Fretting-Wear Performance of Candu Steam Generator U-Tubes: Instrumentation, 10.1115/PVP2009-78076 · DOI
  159. Jo, Fluidelastic Instability Analysis of Operating Nuclear Steam Generator U-Tubes, Nucl. Eng. Des., 193, 55, 10.1016/S0029-5493(99)00173-9 · DOI
  160. Jo, Dynamic Characteristics of Steam Generator U-Tubes With Defect, Nucl. Eng. Des., 235, 821, 10.1016/j.nucengdes.2004.09.009 · DOI
  161. Nakamura, Advanced Estimation on Fluidelastic Instability of U-Bend Tube Bundle of Steam Generator (2nd Report, Fluidelastic Vibration by HFCF-123 Fluid Two-Phase Flow), Trans. Japan Soc. Mech. Eng. Part C, 68, 1064
  162. Janzen, Fluidelastic Instability and Work-Rate Measurements of Steam-Generator U-Tubes in Air-Water Cross-Flow, ASME J. Pressure Vessel Technol., 127, 84, 10.1115/1.1849229 · DOI
  163. Schramm, Dynamic Nonlinear Analysis for the Fretting Wear Prediction in Steam Generator Heating Tubes, ASME Pressure Vessels and Piping Division Publication, 414, 179
  164. Nowlan, Dynamic Interaction Between a Straight Tube and an Anti-Vibration Bar, 10.1115/PVP2009-77804 · DOI
  165. Uhlig, Mechanism of Fretting Corrosion, ASME J. Appl. Mech., 21, 401, 10.1115/1.4010940 · DOI
  166. Beavers, Modeling of Flow-Induced Vibrations in Heat Exchangers and Nuclear Reactors, ASME J. Fluids Eng., 96, 358, 10.1115/1.3447170 · DOI
  167. Alyamovskii, Characteristics of Hydrodynamic Forces Acting During Self-Oscillations of Pipes in Heat Exchange Apparatus, Energomashinostroenie, 7, 33
  168. Blevins, Flow-Induced Vibration in Nuclear Reactors: A Review, Prog. Nucl. Energy, 4, 25, 10.1016/0149-1970(79)90008-8 · DOI
  169. Engel, Impact Wear of Materials, 10.1115/1.3424343 · DOI
  170. Gaul, Cyclic Wear Behavior (Fretting) of a Tempered Martensite Steel, Metall. Mater. Trans. A, 11A, 1581, 10.1007/BF02654522 · DOI
  171. Païdoussis, Dynamics of Arrays of Cylinders With Internal and External Axial Flow, J. Sound Vib., 76, 361, 10.1016/0022-460X(81)90517-4 · DOI
  172. Magel, E. E. , 1990, Experimental and Theoretical Studies of the Wear of Heat Exchanger Tubes, MS thesis, University of British Columbia, Canada.
  173. Cai, Theory for Fluidelastic Instability of Tube-Support-Plate-Inactive Modes, ASME J. Pressure Vessel Technol., 114, 139, 10.1115/1.2929021 · DOI
  174. Gessesse, On the Mechanics of Crack Initiation and Propagation in Elasto-Plastic Materials in Impact Fretting Wear, ASME J. Tribol., 126, 395, 10.1115/1.1491975 · DOI
  175. Attia, New Parameter for Characterizing and Correlating Impact-Sliding Fretting Wear to Energy Dissipation—Experimental Investigation, Wear, 263, 419, 10.1016/j.wear.2007.01.105 · DOI
  176. Yetisir, Prediction of Pressure Tube Fretting-Wear Damage Due to Fuel Vibration, Nucl. Eng. Des., 176, 261, 10.1016/S0029-5493(97)00149-0 · DOI
  177. Yetisir, Fretting Wear Damage of Heat Exchanger Tubes: A Proposed Damage Criterion Based on Tube Vibration Response, ASME J. Pressure Vessel Technol., 120, 297, 10.1115/1.2842061 · DOI
  178. Ko, Experimental Studies of Tube Fretting in Steam Generators and Heat Exchangers, ASME J. Pressure Vessel Technol., 101, 125, 10.1115/1.3454611 · DOI
  179. Ko, Heat Exchanger Tube Fretting Wear: Review and Application to Design, ASME J. Tribol., 107, 149, 10.1115/1.3261010 · DOI
  180. Ko, The Significance of Shear and Normal Force Components on Tube Wear Due to Fretting and Periodic Impacting, Wear, 106, 261, 10.1016/0043-1648(85)90112-7 · DOI
  181. Ko, P. L. , 1985c, “Significance of Shear and Normal Force Components on Tube Wear Due to Fretting and Periodic Impacting,” Atomic Energy Canada Ltd. Report No. AECL-8845. · DOI
  182. Taylor, Experimental Determination of Single- and Two-Phase Cross-Flow-Induced Forces on Tube Rows, ASME J. Pressure Vessel Technol., 110, 22, 10.1115/1.3265563 · DOI
  183. Jeong, Wear Characteristics of Tube-Support Components for a Nuclear Steam Generator Under Fretting Conditions, Solid State Phenom., 120, 181, 10.4028/www.scientific.net/SSP.120.181 · DOI
  184. Choi, An Analytical Method to Predict Fretting-Wear Damage in the Double 90 U-Bend Tubes, 10.1115/ICONE14-89425 · DOI
  185. Tanaka, Fluid Elastic Vibration of Tube Array in Cross-Flow, J. Sound Vib., 77, 19, 10.1016/S0022-460X(81)80005-3 · DOI
  186. Sinha, Finite Element Simulation of Dynamic Behavior of an Open-Ended Cantilever Pipe Conveying Fluid, J. Sound Vib., 240, 189, 10.1006/jsvi.2000.3113 · DOI
  187. Pettigrew, A Simple Energy Approach to Assess Vibration and Fretting-Wear Damage in Process Equipment, 281
  188. Jo, Flow-Induced Vibration and Fretting-Wear Predictions of Steam Generator Helical Tubes, Nucl. Eng. Des., 238, 890, 10.1016/j.nucengdes.2006.12.001 · DOI
  189. Sauve, Probabilistic Methods for the Prediction of Damage in Process Equipment Tubes Under Nonlinear Flow Induced Vibration, 283
  190. Hassan, A Simulation of the Turbulence Response of Heat Exchanger Tubes in Lattice-Bar Supports, J. Fluids Struct., 16, 1145, 10.1006/jfls.2002.0468 · DOI
  191. Hassan, The Effects of Support Geometry on the Turbulence Response of Loosely Supported Heat Exchanger Tubes, J. Fluids Struct., 18, 529, 10.1016/j.jfluidstructs.2003.08.011 · DOI
  192. Hassan, A New Tube/Support Impact Model for Heat Exchanger Tubes, J. Fluids Struct., 21, 561, 10.1016/j.jfluidstructs.2005.07.016 · DOI
  193. Chai, Finite Element Analysis of Fretting Wear Under Various Contact Conditions, Key Eng. Mater., 312, 375, 10.4028/www.scientific.net/KEM.312.375 · DOI
  194. Lee, Application of Influence Function Method on the Fretting Wear of Tube-To-Plate Contact, Tribol. Int., 42, 951, 10.1016/j.triboint.2009.01.005 · DOI
  195. Zhang, Parametric Studies of Coupled Vibration of Cylindrical Pipes Conveying Fluid With the Wave Propagation Approach, Comput. Struct., 80, 287, 10.1016/S0045-7949(02)00005-6 · DOI
  196. Blevins, Fretting Wear of Heat Exchanger Tubes, Part I: Experiments, 10.1115/1.3446631 · DOI
  197. Blevins, Fretting Wear of Heat Exchanger Tubes, Part II: Models, ASME J. Eng. Power, 101, 630, 10.1115/1.3446632 · DOI
  198. Levy, Impact-Fretting Wear in CO2-Based Environments, Wear, 106, 97, 10.1016/0043-1648(85)90106-1 · DOI
  199. Attia, Experimental Investigation of Long-Term Fretting Wear of a Multi-Span Steam Generator Tubes With U-Bend Sections, Wear, 225–229, 563, 10.1016/S0043-1648(98)00382-2 · DOI
  200. Attia, M. H. , 1997, “Review and Assessment of the Work Rate Concept for Predicting Fretting Wear of Steam Generator Tubes,” Ontario Hydro Technologies Technical Report No. A-NSG-94-35-P.

200 of 301 shown

Cited by

Sorted by citations

Metadata

Authors
Ibrahim, R. A.
Affiliations
Wayne State University (US)
Corresponding author
Ibrahim, R. A.
ORCID
Ibrahim, R. A.
Venue
Journal of Pressure Vessel Technology
Publisher
Wiley
Published
2011-02-28
Volume
133
Issue
2
ISSN
  • 0094-9930 (ISSN-L)
  • 1528-8978
DOI
10.1115/1.4001270
OpenAlex
W2151112968
Cited by
135
References
0
Citations by year
2026: 6 · 2025: 10 · 2024: 15 · 2023: 14 · 2022: 13 · 2021: 8 · 2020: 10 · 2019: 13 · 2018: 8 · 2017: 10 · 2016: 8 · 2015: 4 · 2014: 9 · 2013: 2 · 2012: 5
FWCI
8.15
Type
journal article
Language
en
Open access
closed
Locations
Journal of Pressure Vessel Technology (publishedVersion)
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Vibration and Dynamic Analysis
  • Physical Sciences › Engineering › Computational Mechanics › Fluid Dynamics and Vibration Analysis
  • Physical Sciences › Engineering › Control and Systems Engineering › Dynamics and Control of Mechanical Systems
Keywords
fluid-conveying pipes, fluidelastic instability, two-phase flow, fretting wear, heat exchanger tubes, vibro-impact, parameter estimation, marine risers, nuclear power plant piping, viscoelastic pipes, active vibration control, turbulent flow

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review