The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Factors of Safety for Richardson Extrapolation
Abstract
A factor of safety method for quantitative estimates of grid-spacing and time-step uncertainties for solution verification is developed. It removes the two deficiencies of the grid convergence index and correction factor methods, namely, unreasonably small uncertainty when the estimated order of accuracy using the Richardson extrapolation method is greater than the theoretical order of accuracy and lack of statistical evidence that the interval of uncertainty at the 95% confidence level bounds the comparison error. Different error estimates are evaluated using the effectivity index. The uncertainty estimate builds on the correction factor method, but with significant improvements. The ratio of the estimated order of accuracy and theoretical order of accuracy P instead of the correction factor is used as the distance metric to the asymptotic range. The best error estimate is used to construct the uncertainty estimate. The assumption that the factor of safety is symmetric with respect to the asymptotic range was removed through the use of three instead of two factor of safety coefficients. The factor of safety method is validated using statistical analysis of 25 samples with different sizes based on 17 studies covering fluids, thermal, and structure disciplines. Only the factor of safety method, compared with the grid convergence index and correction factor methods, provides a reliability larger than 95% and a lower confidence limit greater than or equal to 1.2 at the 95% confidence level for the true mean of the parent population of the actual factor of safety. This conclusion is true for different studies, variables, ranges of P values, and single P values where multiple actual factors of safety are available. The number of samples is large and the range of P values is wide such that the factor of safety method is also valid for other applications including results not in the asymptotic range, which is typical in industrial and fluid engineering applications. An example for ship hydrodynamics is provided.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Procedure for Estimation and Reporting of Uncertainty Due to Discretization in CFD Applications
(2008) · Journal of Fluids Engineering · doi:10.1115/1.2960953 · Cited by 4,327
Advanced engineering mathematics
(1998) · Choice Reviews Online · doi:10.5860/choice.35-5129 · Cited by 4,100
Verification and Validation in Computational Science and Engineering
Roache, P. J. (1998) · Cited by 2,157
Stern, F., Wilson, R. V., Coleman, H. W., & Paterson, E. G. (2001) · Journal of Fluids Engineering · doi:10.1115/1.1412235 · Cited by 935
Self-citationAdvanced engineering mathematics, 8th ed
Kreyszig, E. (1999) · Cited by 857
(2016) · Systems Engineering for Commercial Aircraft · doi:10.4324/9781315611716-18 · Cited by 804
The 2D lid-driven cavity problem revisited
Bruneau, C.-H., & Saad, M. (2006) · Computers & Fluids · doi:10.1016/j.compfluid.2004.12.004 · Cited by 465
Advanced Engineering Mathematics: A Second Course
Duffy, D. G. (2022) · Chapman & Hall/CRC eBooks · doi:10.1201/9781003272205 · Cited by 309
Numerical Experiments on Application of Richardson Extrapolation With Nonuniform Grids
Celik, I., & Karatekin, O. (1997) · Journal of Fluids Engineering · doi:10.1115/1.2819284 · Cited by 262
An unsteady single‐phase level set method for viscous free surface flows
Carrica, P. M., Wilson, R. V., & Stern, F. (2007) · International Journal for Numerical Methods in Fluids · doi:10.1002/fld.1279 · Cited by 180
Self-citation
Cited by
Eça, L., & Hoekstra, M. (2014) · Journal of Computational Physics · doi:10.1016/j.jcp.2014.01.006 · Cited by 559
Numerical analysis of the effects of air on light distribution in a bubble column photobioreactor
McHardy, C., Luzi, G., Lindenberger, C., Agudo, J. R., Delgado, A., & Rauh, C. (2018) · Algal Research · doi:10.1016/j.algal.2018.02.016 · Cited by 25
Metadata
- Authors
- Xing, T., & Stern, F.
- Venue
- Journal of Fluids Engineering
- Publisher
- ASME International
- Published
- 2010-06-01
- Volume
- 132
- Issue
- 6
- ISSN
- 0098-2202 (ISSN-L)
- 1528-901X
- OpenAlex
- W2038817846
- Cited by
- 403
- References
- 13
- FWCI
- 11.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Factors of Safety for Richardson Extrapolation. https://app.cochat.ai/papers/10.1115/1.4001771
- The paper
- Xing, T., & Stern, F. (2010). Factors of Safety for Richardson Extrapolation. Journal of Fluids Engineering. https://doi.org/10.1115/1.4001771
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.