The DOI matches its Crossref record.
A Fast Mask Projection Stereolithography Process for Fabricating Digital Models in Minutes
Abstract
The purpose of this paper is to present a direct digital manufacturing (DDM) process that is an order of magnitude faster than other DDM processes that are currently available. The developed process is based on a mask-image-projection-based stereolithography (MIP-SL) process, in which a digital micromirror device (DMD) controls projection light to selectively cure liquid photopolymer resin. In order to achieve high-speed fabrication, we investigate the bottom-up projection system in the MIP-SL process. A two-way linear motion approach has been developed for the quick spreading of liquid resin into uniform thin layers. The system design and related settings for achieving a fabrication speed of a few seconds per layer are presented. Additionally, the hardware, software, and material setups for fabricating three-dimensional (3D) digital models are presented. Experimental studies using the developed testbed have been performed to verify the effectiveness and efficiency of the presented fast MIP-SL process. The test results illustrate that the newly developed process can build a moderately sized part within minutes instead of hours that are typically required.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
3D printed microfluidic devices: enablers and barriers
Waheed, S., Cabot, J. M., Macdonald, N. P., Lewis, T., Guijt, R. M., Paull, B., & Breadmore, M. C. (2016) · Lab on a Chip · doi:10.1039/c6lc00284f · Cited by 1,039
Au, A. K., Huynh, W., Horowitz, L. F., & Folch, A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201504382 · Cited by 788
Microfluidics‐Enabled Multimaterial Maskless Stereolithographic Bioprinting
Miri, A. K., Nieto, D., Iglesias, L., Goodarzi Hosseinabadi, H., Maharjan, S., Ruiz‐Esparza, G. U., Khoshakhlagh, P., Manbachi, A., Dokmeci, M. R., Chen, S., et al. (2018) · Advanced Materials · doi:10.1002/adma.201800242 · Cited by 431
Khorsandi, D., Fahimipour, A., Abasian, P., Saber, S. S., Seyedi, M., Ghanavati, S., Ahmad, A., De Stephanis, A. A., Taghavinezhaddilami, F., Leonova, A., et al. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.12.044 · Cited by 428
Metadata
- Authors
- Pan, Y., Zhou, C., & Chen, Y.
- Venue
- Journal of Manufacturing Science and Engineering
- Publisher
- ASME International
- Published
- 2012-09-10
- Volume
- 134
- Issue
- 5
- ISSN
- 1087-1357 (ISSN-L)
- 1528-8935
- OpenAlex
- W2024741441
- Cited by
- 164
- References
- 0
- FWCI
- 10.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Fast Mask Projection Stereolithography Process for Fabricating Digital Models in Minutes. https://app.cochat.ai/papers/10.1115/1.4007465
- The paper
- Pan, Y., Zhou, C., & Chen, Y. (2012). A Fast Mask Projection Stereolithography Process for Fabricating Digital Models in Minutes. Journal of Manufacturing Science and Engineering. https://doi.org/10.1115/1.4007465
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.