The DOI matches its Crossref record.
Analysis of Stresses and Strains Near the End of a Crack Traversing a Plate
Abstract
A substantial fraction of the mysteries associated with crack extension might be eliminated if the description of fracture experiments could include some reasonable estimate of the stress conditions near the leading edge of a crack particularly at points of onset of rapid fracture and at points of fracture arrest. It is pointed out that for somewhat brittle tensile fractures in situations such that a generalized plane-stress or a plane-strain analysis is appropriate, the influence of the test configuration, loads, and crack length upon the stresses near an end of the crack may be expressed in terms of two parameters. One of these is an adjustable uniform stress parallel to the direction of a crack extension. It is shown that the other parameter, called the stress-intensity factor, is proportional to the square root of the force tending to cause crack extension. Both factors have a clear interpretation and field of usefulness in investigations of brittle-fracture mechanics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
The Mathematical Theory of Equilibrium Cracks in Brittle Fracture
Barenblatt, G. I. (1962) · Advances in Applied Mechanics · doi:10.1016/s0065-2156(08)70121-2 · Cited by 5,277
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Adhesion of spheres: The JKR-DMT transition using a dugdale model
Maugis, D. (1992) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(92)90285-t · Cited by 2,066
Barenblatt, G. I. (1996) · Cambridge University Press eBooks · doi:10.1017/cbo9781107050242 · Cited by 2,017
Fundamentals of Fracture Mechanics
(2002) · Mechanical Properties of Engineered Materials · doi:10.1201/9780203910399.ch11 · Cited by 1,735
The elastic properties, elastic models and elastic perspectives of metallic glasses
Wang, W. H. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.07.001 · Cited by 1,362
Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review
Iveson, S. M., Litster, J. D., Hapgood, K., & Ennis, B. J. (2001) · Powder Technology · doi:10.1016/s0032-5910(01)00313-8 · Cited by 1,297
Multi-scale multi-mechanism design of tough hydrogels: building dissipation into stretchy networks
Zhao, X. (2014) · Soft Matter · doi:10.1039/c3sm52272e · Cited by 1,252
Alfano, G., & Crisfield, M. A. (2001) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.93 · Cited by 1,224
Vibration of cracked structures: A state of the art review
Dimarogonas, A. D. (1996) · Engineering Fracture Mechanics · doi:10.1016/0013-7944(94)00175-8 · Cited by 1,165
A damage model for the simulation of delamination in advanced composites under variable-mode loading
Turon, A., Camanho, P. P., Costa, J., & Dávila, C. G. (2006) · Mechanics of Materials · doi:10.1016/j.mechmat.2005.10.003 · Cited by 985
Pollard, D. D., & Segall, P. (1987) · Fracture Mechanics of Rock · doi:10.1016/b978-0-12-066266-1.50013-2 · Cited by 903
Review of fracture toughness (G, K, J, CTOD, CTOA) testing and standardization
Zhu, X.-K., & Joyce, J. A. (2012) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2012.02.001 · Cited by 815
Residual stress and its role in failure
Withers, P. J. (2007) · Reports on Progress in Physics · doi:10.1088/0034-4885/70/12/r04 · Cited by 730
A length scale insensitive phase-field damage model for brittle fracture
Wu, J.-Y., & Nguyen, V. P. (2018) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2018.06.006 · Cited by 662
Knott, J. F. (1983) · Atomistics of Fracture · doi:10.1007/978-1-4613-3500-9_6 · Cited by 629
Phase-field modeling of fracture
(2020) · Advances in Applied Mechanics · doi:10.1016/bs.aams.2019.08.001 · Cited by 620
Crack coalescence in a rock-like material containing two cracks
Wong, R. H. C., & Chau, K. T. (1998) · International Journal of Rock Mechanics and Mining Sciences · doi:10.1016/s0148-9062(97)00303-3 · Cited by 568
Berto, F., & Lazzarin, P. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2013.11.001 · Cited by 550
Fatigue of structures and materials in the 20th century and the state of the art
Schijve, J. (2003) · International Journal of Fatigue · doi:10.1016/s0142-1123(03)00051-3 · Cited by 524
The fracture of bulk metallic glasses
Sun, B. A., & Wang, W. H. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.05.002 · Cited by 522
The essential work of plane stress ductile fracture
Cotterell, B., & Reddel, J. K. (1977) · International Journal of Fracture · doi:10.1007/bf00040143 · Cited by 519
A literature survey on fatigue analysis approaches for rubber
MARS, W., & FATEMI, A. (2002) · International Journal of Fatigue · doi:10.1016/s0142-1123(02)00008-7 · Cited by 506
Mechanical factors favoring release from fouling release coatings
Brady, R. F., & Singer, I. L. (2000) · Biofouling · doi:10.1080/08927010009386299 · Cited by 480
Instability in dynamic fracture
Fineberg, J., & Marder, M. (1999) · Physics Reports · doi:10.1016/s0370-1573(98)00085-4 · Cited by 418
Carrara, P., Ambati, M., Alessi, R., & De Lorenzis, L. (2020) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2019.112731 · Cited by 404
Adhesion to tooth structure: A critical review of “macro” test methods
Braga, R. R., Meira, J. B. C., Boaro, L. C. C., & Xavier, T. A. (2010) · Dental Materials · doi:10.1016/j.dental.2009.11.150 · Cited by 390
Crack Propagation and the Fracture of Concrete
(1961) · ACI Journal Proceedings · doi:10.14359/7999 · Cited by 386
Fractal nature of material microstructure and size effects on apparent mechanical properties
Carpinteri, A. (1994) · Mechanics of Materials · doi:10.1016/0167-6636(94)00008-5 · Cited by 383
Numerical modelling of crack propagation: automatic remeshing and comparison of different criteria
Bouchard, P. O., Bay, F., & Chastel, Y. (2003) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(03)00391-8 · Cited by 366
Linear fracture mechanics, fracture transition, and fracture control
Irwin, G. R. (1968) · Engineering Fracture Mechanics · doi:10.1016/0013-7944(68)90001-5 · Cited by 354
Self-citationHamdia, K. M., Silani, M., Zhuang, X., He, P., & Rabczuk, T. (2017) · International Journal of Fracture · doi:10.1007/s10704-017-0210-6 · Cited by 352
Finite fracture mechanics: A coupled stress and energy failure criterion
Cornetti, P., Pugno, N., Carpinteri, A., & Taylor, D. (2006) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2006.03.010 · Cited by 341
Pugno †, N. M., & Ruoff ‡, R. S. (2004) · Philosophical Magazine · doi:10.1080/14786430412331280382 · Cited by 309
Simple and accurate model of fracture toughness of solids
Niu, H., Niu, S., & Oganov, A. R. (2019) · Journal of Applied Physics · doi:10.1063/1.5066311 · Cited by 306
Haldimann, M., Luible, A., & Overend, M. (2008) · doi:10.2749/sed010 · Cited by 300
Failure criteria for brittle elastic materials
Yosibash, Z., Bussiba, A., & Gilad, I. (2004) · International Journal of Fracture · doi:10.1023/b:frac.0000022244.31825.3b · Cited by 296
Twisting cracks in Bouligand structures
Suksangpanya, N., Yaraghi, N. A., Kisailus, D., & Zavattieri, P. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.06.010 · Cited by 294
Phase field approximation of dynamic brittle fracture
Schlüter, A., Willenbücher, A., Kuhn, C., & Müller, R. (2014) · Computational Mechanics · doi:10.1007/s00466-014-1045-x · Cited by 292
The energy efficiency of ball milling in comminution
Fuerstenau, D. W., & Abouzeid, A.-Z. M. (2002) · International Journal of Mineral Processing · doi:10.1016/s0301-7516(02)00039-x · Cited by 289
A review of experimental approaches to fracture toughness evaluation at the micro-scale
Ast, J., Ghidelli, M., Durst, K., Göken, M., Sebastiani, M., & Korsunsky, A. M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107762 · Cited by 269
On the Problem of Crack Extension in Brittle Solids Under General Loading
Palaniswamy, K., & Knauss, W. G. (1978) · Mechanics Today · doi:10.1016/b978-0-08-021792-5.50010-0 · Cited by 264
A review on concrete fracture energy and effective parameters
Khalilpour, S., BaniAsad, E., & Dehestani, M. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.03.013 · Cited by 253
Mixed-mode toughness of human cortical bone containing a longitudinal crack in far-field compression
Olvera, D., Zimmermann, E. A., & Ritchie, R. O. (2012) · Bone · doi:10.1016/j.bone.2011.11.004 · Cited by 24
Metadata
- Authors
- Irwin, G. R.
- Venue
- Journal of Applied Mechanics
- Publisher
- ASME International
- Published
- 1957-09-01
- Volume
- 24
- Issue
- 3
- Pages
- 361-364
- ISSN
- 0021-8936 (ISSN-L)
- 1528-9036
- OpenAlex
- W2297929186
- Cited by
- 5,661
- References
- 0
- FWCI
- 7.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.