Energy Absorption of Thin-Walled Square Tubes With a Prefolded Origami Pattern—Part I: Geometry and Numerical Simulation

Abstract

Thin-walled tubes subjected to axial crushing have been extensively employed as energy absorption devices in transport vehicles. Conventionally, they have a square or rectangular section, either straight or tapered. Dents are sometimes added to the surface in order to reduce the initial buckling force. This paper presents a novel thin-walled energy absorption device known as the origami crash box that is made from a thin-walled tube of square cross section whose surface is prefolded according to a developable origami pattern. The prefolded surface serves both as a type of geometric imperfection to lower the initial buckling force and as a mode inducer to trigger a collapse mode that is more efficient in terms of energy absorption. It has been found out from quasi-static numerical simulation that a new collapse mode referred to as the completed diamond mode, which features doubled traveling plastic hinge lines compared with those in conventional square tubes, can be triggered, leading to higher energy absorption and lower peak force than those of conventional ones of identical weight. A parametric study indicates that for a wide range of geometric parameters the origami crash box exhibits predictable and stable collapse behavior, with an energy absorption increase of 92.1% being achieved in the optimum case. The origami crash box can be stamped out of a thin sheet of material like conventional energy absorption devices without incurring in-plane stretching due to the developable surface of the origami pattern. The manufacturing cost is comparable to that of existing thin-walled crash boxes, but it absorbs a great deal more energy during a collision.