Nonlinear Torsional Vibration Absorber for Flexible Structures
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
A new kind of nonlinear energy sink (NES) is proposed to control the vibration of a flexible structure with simply supported boundaries in the present work. The new kind of absorber is assembled at the end of structures and absorbs energy through the rotation angle at the end of the structure. It is easy to design and attached to the support of flexible structures. The structure and the absorber are coupled just with a nonlinear restoring moment and the damper in the absorber acts on the structure indirectly. In this way, all the linear characters of the flexible structure will not be changed. The system is investigated by a special perturbation method and verified by simulation. Parameters of the absorber are fully discussed to optimize the efficiency of it. For the resonance, the maximum motion is restrained up to 90% by the optimized absorber. For the impulse, the vibration of the structure could attenuate rapidly. In addition to the high efficiency, energy transmits to the absorber uniaxially. For the high efficiency, convenience of installation and the immutability of linear characters, the new kind of rotating absorber provides a very good strategy for the vibration control.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gendelman, O., Manevitch, L. I., Vakakis, A. F., & M’Closkey, R. (2001) · Journal of Applied Mechanics · doi:10.1115/1.1345524 · Cited by 665
Mamaghani, A. E., Khadem, S. E., & Bab, S. (2016) · Nonlinear Dynamics · doi:10.1007/s11071-016-2992-x · Cited by 162
Nucera, F., Lo Iacono, F., McFarland, D. M., Bergman, L. A., & Vakakis, A. F. (2008) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2007.11.018 · Cited by 148
Dynamics of an Eccentric Rotational Nonlinear Energy Sink
Gendelman, O. V., Sigalov, G., Manevitch, L. I., Mane, M., Vakakis, A. F., & Bergman, L. A. (2012) · Journal of Applied Mechanics · doi:10.1115/1.4005402 · Cited by 143
Nucera, F., McFarland, D. M., Bergman, L. A., & Vakakis, A. F. (2010) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2010.01.020 · Cited by 139
On the dynamics around targeted energy transfer for vibro-impact nonlinear energy sink
Li, T., Seguy, S., & Berlioz, A. (2017) · Nonlinear Dynamics · doi:10.1007/s11071-016-3127-0 · Cited by 103
Cited by
Designs, analysis, and applications of nonlinear energy sinks
Ding, H., & Chen, L.-Q. (2020) · Nonlinear Dynamics · doi:10.1007/s11071-020-05724-1 · Cited by 553
Self-citationNonlinear vibration isolation for fluid-conveying pipes using quasi-zero stiffness characteristics
Ding, H., Ji, J., & Chen, L.-Q. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.11.057 · Cited by 294
Self-citationAn inertial nonlinear energy sink
Zhang, Z., Lu, Z.-Q., Ding, H., & Chen, L.-Q. (2019) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2019.03.014 · Cited by 167
Self-citationElimination of multimode resonances of composite plate by inertial nonlinear energy sinks
Chen, H.-Y., Mao, X.-Y., Ding, H., & Chen, L.-Q. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106383 · Cited by 147
Self-citationZang, J., Cao, R.-Q., & Zhang, Y.-W. (2021) · Nonlinear Dynamics · doi:10.1007/s11071-021-06625-7 · Cited by 59
Bending vibration control of pipes conveying fluids by nonlinear torsional absorbers at the boundary
Mao, X., Ding, H., & Chen, L. (2021) · Science China Technological Sciences · doi:10.1007/s11431-020-1791-2 · Cited by 57
Self-citation
Metadata
- Authors
- Mao, X.-Y., Ding, H., & Chen, L.-Q.
- Venue
- Journal of Applied Mechanics
- Publisher
- ASME International
- Published
- 2018-12-07
- Volume
- 86
- Issue
- 2
- ISSN
- 0021-8936 (ISSN-L)
- 1528-9036
- OpenAlex
- W2901664689
- Cited by
- 34
- References
- 6
- FWCI
- 4.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.