CoChat
Sign Up
Cited by 197

The DOI matches its Crossref record.

A Review of Similitude Methods for Structural Engineering

Casaburo, Alessandro, Petrone, Giuseppe, Franco, Francesco, De Rosa, Sergio·2019·Applied Mechanics Reviews
DOI 10.1115/1.4043787
Open this paper in CoChat — free account

Abstract

Similitude theory allows engineers, through a set of tools known as similitude methods, to establish the necessary conditions to design a scaled (up or down) model of a full-scale prototype structure. In recent years, to overcome the obstacles associated with full-scale testing, such as cost and setup, research on similitude methods has grown and their application has expanded into many branches of engineering. The aim of this paper is to provide as comprehensive a review as possible about similitude methods applied to structural engineering and their limitations due to size effects, rate sensitivity phenomena, etc. After a brief historical introduction and a more in-depth analysis of the main methods, the paper focuses on similitude applications classified, first, by test article, then by engineering fields.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1115/1.4043787

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • Systems with the same dimensionless parameter groups tend to behave in a similar manner and respond similarly to perturbations.

    “In engineering this principle is called similitude analysis54,55, where systems with the same dimensionless parameter groups tend to behave in a similar manner and respond similarly to perturbations.”

    From A damage accumulation model identifies distinct aging regimes across species (2026) · cites this paper as [55]

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

No references could be resolved yet.

Research works printed but not linked: 303

  1. 1993, Structural Similitude for Laminated Structures, Compos. Eng., 3, 751, 10.1016/0961-9526(93)90094-Z · DOI
  2. 1974, Scale Modeling of Vehicle Crashes—Techniques, Applicability, and Accuracy; Cost Effectiveness, 10.4271/740586 · DOI
  3. Simitses, G. J., Starnes, J. H., Jr., and Rezaeepazhand, J., 2000, “Structural Similitude and Scaling Laws for Plates and Shells: A Review,” AIAA Paper No. AIAA-2000-1383.https://arc.aiaa.org/doi/abs/10.2514/6.2000-1383 · DOI
  4. 2016, Reduced Scale Models Based on Similitude Theory: A Review up to 2015, Eng. Struct., 119, 81, 10.1016/j.engstruct.2016.04.016 · DOI
  5. 2017, Similitude Design for the Vibration Problems of Plates and Shells: A Review, Front. Mech. Eng., 12, 253, 10.1007/s11465-017-0418-1 · DOI
  6. 1989, Similitude, Similarity and Scaling, Landscape Ecol., 3, 207, 10.1007/BF00131539 · DOI
  7. 1998, Physical Modelling and Similitude of Marine Structures, Ocean Eng., 26, 111, 10.1016/S0029-8018(97)10004-X · DOI
  8. 1979, Scale Modelling in LMFBR Safety, Nucl. Eng. Des., 55, 235, 10.1016/0029-5493(79)90159-6 · DOI
  9. 2017, Scale Modeling Vibro-Acoustics, Acoust. Sci. Tech., 38, 113, 10.1250/ast.38.113 · DOI
  10. 1730, Mathematical Discourses Concerning Two New Sciences Relating to Mechanics and Local Motion: In Four Dialogues
  11. 1915, The Principle of Similitude, Nature, 95, 66, 10.1038/095066c0 · DOI
  12. 1971, Historico-Critical Review of Dimensional Analysis, J. Franklin Inst., 292, 391, 10.1016/0016-0032(71)90160-8 · DOI
  13. 1950, Dimensional Analysis
  14. 1950, Similitude in Engineering
  15. 1951, Dimensionless Analysis and Theory of Models
  16. 1954, Model Analysis of Structures
  17. 1964, Dimensional Analysis and Scale Factors
  18. 1965, Introduction to the Theory of Similarity
  19. 1965, Similitude and Approximation Theory
  20. 1980, Similitude and Modelling
  21. 1997, Buckling Experiments
  22. 1991, Similarity Methods in Engineering Dynamics: Theory and Practice of Scale Modeling
  23. 2001, The Physical Basis of Dimensional Analysis
  24. 1999, Structural Modeling and Experimental Techniques
  25. 2007, Applied Dimensional Analysis and Modeling
  26. 2011, Dimensional Analysis With Case Studies in Mechanics
  27. 2012, Similarity and Modeling in Science and Engineering
  28. 2012, Dimensional Analysis and Self-Similarity Methods for Engineers and Scientists
  29. 2017, Dimensional Analysis Beyond the Pi Theorem
  30. Mazzariol, L. M., Calle, M. A. G., Oshiro, R. E., and Alves, M., “Scaling of Stiffened Panels Subjected to Impact Loading,” Mecánica Computational, Vol. XXIX, E. Dvorkin, M. Goldscmit, and M. Storti, eds., Asociación Argentina de Mecánica Computacional, Buenos Aires, Argentina, pp. 1275–1289.
  31. 2004, Similitude of Sandwich Panels With a ‘Soft’ Core in Buckling, Compos. Part B, 35, 599, 10.1016/j.compositesb.2003.11.003 · DOI
  32. 1988, Scaling of Impact-Loaded Carbon-Fiber Composites, AIAA J., 26, 989, 10.2514/3.10001 · DOI
  33. 1995, Scaling Effects in the Energy Absorption of Carbon-Fiber/PEEK Composite Tubes, Compos. Sci. Technol., 55, 211, 10.1016/0266-3538(95)00081-X · DOI
  34. 1989, Scale-Model Testing of Reinforced Concrete Under Impact Loading Conditions, Can. J. Civ. Eng., 16, 459, 10.1139/l89-075 · DOI
  35. 1962, Similitude Requirements for Scale Model Determination of Shell Buckling Under Impulsive Pressures
  36. 1971, Similitude Approximations for Vibrating Thin Shells, J. Acoust. Soc. Am., 49, 1535
  37. 2002, Physical Model and Fundamental Laws: Using One Piece of the World to Tell About Another, Mind Soc., 3, 51, 10.1007/BF02511866 · DOI
  38. Meijers, 2009, Similarity and Dimensional Analysis, 799
  39. Magnani, 2015, Experimentation on Analogue Models
  40. 2006, Models of Machines and Models of Phenomena, Int. Stud. Philos. Sci., 20, 69, 10.1080/02698590600641024 · DOI
  41. 2014, The Morals of Model-Making, Stud. Hist. Philos. Sci., 46, 31, 10.1016/j.shpsa.2013.11.006 · DOI
  42. Magnani, 2015, Physically Similar Systems: A History of the Concept
  43. 2016, A Comparison of the Modern Lie Scaling Method to Classical Scaling Techniques, Hydrol. Earth Syst. Sci., 20, 2669, 10.5194/hess-20-2669-2016 · DOI
  44. 1974, Similarity Methods for Differential Equations
  45. Jackson, K. E., 1993, “Workshop on Scaling Effects in Composite Materials and Structures,” Workshop Sponsored by the National Aeronautics and Space Administration, Hampton, VA, Nov. 15–16, Paper No. 3271.
  46. 2018, Modular Approach to Structural Similitude, Int. J. Mech. Sci., 135, 294, 10.1016/j.ijmecsci.2017.11.005 · DOI
  47. 1914, On Physically Similar Systems, Illustrations of the Use of Dimensional Equations, Phys. Rev., 4, 345, 10.1103/PhysRev.4.345 · DOI · Paper page
  48. 2001, A New Approach for Establishing Structural Similitude for Buckling of Symmetric Cross-Ply Laminated Plates Subjected to Combined Load, Thammasat. Int. J. Sci. Technol., 6, 55
  49. Torkamani, S., Jafari, A. A., and Navazi, H. M., 2008, “Scaled Down Models for Free Vibration Analysis of Orthogonally Stiffened Cylindrical Shells Using Similitude Theory,” 26th International Congress of the Aeronautical Sciences (ICAS), Anchorage, AL, Sept. 14–19, pp. 3458–3469.
  50. 2003, The Complete-Similitude Scale Models for Predicting the Vibration Characteristics of the Elastically Restrained Flat Plates Subjected to Dynamic Loads, J. Sound Vib., 268, 1041, 10.1016/S0022-460X(03)00303-1 · DOI
  51. 2005, Application of an Energy Theorem to Derive a Scaling Law for Structural Behaviors, Thammasat. Int. J. Sc. Tech., 10, 33
  52. 1997, First Assessment of the Scaling Procedure for the Evaluation of the Damped Structural Response, J. Sound Vib., 204, 540, 10.1006/jsvi.1996.0910 · DOI
  53. 2003, Statistical Energy Analysis, Energy Distribution Models and System Modes, J. Sound Vib., 264, 391, 10.1016/S0022-460X(02)01201-4 · DOI
  54. 2011, Structural Similitudes for the Dynamic Response of Plates and Assemblies of Plates, Mech. Syst. Signal Process., 25, 969, 10.1016/j.ymssp.2010.10.004 · DOI
  55. 2012, A Similitude for Structural Acoustic Enclosures, Mech. Syst. Signal Process., 30, 330, 10.1016/j.ymssp.2012.01.018 · DOI
  56. 2015, Similitudes for Structural Response of Flexural Plates, Proc. Inst. Mech. Eng., Part C, 230, 174, 10.1177/0954406215572436 · DOI
  57. 2017, Structural Similitudes of Stiffened Cylinders, Math. Mech. Solids, 24, 527, 10.1177/1081286517745722 · DOI
  58. Cho, U., and Wood, K., 1997, “Empirical Similitude Method for the Functional Test With Rapid Prototypes,” Symposium for Solid Freeform Fabrication, The University of Texas at Austin, Austin, TX.10.15781/T2JD4Q88T · DOI
  59. 2015, The Similitude Design Method of Thin-Walled Annular Plates and Determination of Structural Size Intervals, Proc. Inst. Mech. Eng., Part C, 230, 2158, 10.1177/0954406215592055 · DOI
  60. Adams, C., Bös, J., and Melz, T., 2016, “A Scaling Method for Vibrating Structures Using Global Sensitivity Analysis,” 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future, INTER-NOISE 2016, Hamburg, Germany, Aug. 21–24, pp. 5411–5420.https://www.researchgate.net/publication/312378478_A_scaling_method_for_vibrating_structures_using_global_sensitivity_analysis
  61. 2018, Scaling Laws Obtained From a Sensitivity Analysis and Applied to Thin Vibrating Structures, Mech. Syst. Signal Process., 110, 590, 10.1016/j.ymssp.2018.03.032 · DOI
  62. 2000, Application of Response Number for Dynamic Plastic Response of Plates Subjected to Impulsive Loading, Int. J. Pressure Vessels Piping, 77, 711, 10.1016/S0308-0161(00)00082-X · DOI
  63. 2001, Generalization of Response Number for Dynamic Plastic Response of Shells Subjected to Impulsive Loading, Int. J. Pressure Vessels Piping, 78, 453, 10.1016/S0308-0161(01)00050-3 · DOI
  64. 2001, Fiber Metal Laminates: An Introduction
  65. 2007, A Comparison of Ply-Level and Sublaminate-Level Scaling of Fibre-Metal Laminates With In-Plane Dimensions, Adv. Compos. Lett., 16, 233, 10.1177/096369350701600604 · DOI
  66. 2007, Scaling Effects in the Tensile Behavior of Fiber-Metal Laminates, Compos. Sci. Technol., 67, 1684, 10.1016/j.compscitech.2006.06.018 · DOI
  67. 1997, Reduction in Tensile and Flexural Strength of Unidirectional Glass Fibre-Epoxy With Increasing Specimen Size, Compos. Struct., 38, 405, 10.1016/S0263-8223(97)00075-5 · DOI
  68. 1998, Scaling Effects in Sublaminate-Level Scaled Composite Laminates, AIAA J., 36, 441, 10.2514/2.384 · DOI
  69. 2000, Size Effects in Scald Fiber Composites Under Four-Point Flexure Loading, AIAA J., 38, 1047, 10.2514/2.1066 · DOI
  70. 1992, Strength Scaling in Fiber Composites, AIAA J., 30, 1074, 10.2514/3.11029 · DOI
  71. Rezaeepazhand, J., and Simitses, G. J., 1993, “Design of Scaled Down Models for Stability and Vibration Studies,” National Aeronautics and Space Administration, Washington, DC, Technical Report No. 194687. · DOI
  72. 1995, Design of Scaled Down Models for Stability of Laminated Plates, AIAA J., 33, 515, 10.2514/3.12475 · DOI
  73. 1995, Structural Similitude and Scaling Laws for Buckling of Cross-Ply Laminated Plates, J. Thermoplast. Compos. Mater., 8, 240, 10.1177/089270579500800301 · DOI
  74. 1995, Use of Scaled-Down Models for Predicting Vibration Response of Laminated Plates, Compos. Struct., 30, 419, 10.1016/0263-8223(94)00064-6 · DOI
  75. 1996, Design of Scaled Down Models for Predicting Shell Vibration Response, J. Sound Vib., 195, 301, 10.1006/jsvi.1996.0423 · DOI
  76. 1996, Scale Models for Laminated Cylindrical Shells Subjected to Axial Compression, Compos. Struct., 34, 371, 10.1016/0263-8223(95)00154-9 · DOI
  77. 1997, Scaled Models for Laminated Cylindrical Shells Subjected to External Pressure, Mech. Compos. Mater. Struct., 4, 267, 10.1080/10759419708945884 · DOI
  78. 1997, Structural Similitude for Vibration Response of Laminated Cylindrical Shells With Double Curvature, Compos. Part B, 28B, 195
  79. 2001, Structural Similitude for Flat Laminated Surfaces, Compos. Struct., 51, 191, 10.1016/S0263-8223(00)00144-6 · DOI
  80. 2009, Scaled Models for Predicting Buckling of Delaminated Orthotropic Beam-Plates, Compos. Struct., 90, 87, 10.1016/j.compstruct.2009.02.005 · DOI
  81. 2011, Similitude Requirements and Scaling Laws for Flutter Prediction of Angle-Ply Composite Plates, Compos. Part B, 42, 51, 10.1016/j.compositesb.2010.09.010 · DOI
  82. 2011, Accuracy of Scale Models for Flutter Prediction of Cross-Ply Laminated Plates, J. Reinf. Plast. Compos., 30, 45, 10.1177/0731684410388443 · DOI
  83. 2013, Applicability of Small-Scale Models in Prediction Flutter Pressure of Delaminated Composite Beam-Plates, Int. J. Damage Mech., 22, 590, 10.1177/1056789512456318 · DOI
  84. 2013, Prediction Flutter Boundaries of Laminated Cylindrical Shells Using Scaling Laws, J. Aerosp. Eng., 27
  85. 1989, Scaling Effects in the Static Large Deflection Response of Graphite-Epoxy Composite Beams
  86. 1990, Scaling Effects in the Static and Dynamic Response of Graphite-Epoxy Beam-Columns
  87. Sciammarella, 2016, Similitude Analysis of Composite I–Beams With Application to Subcomponent Testing of Wind Turbine Blades
  88. 2017, Similitude Analysis of Thin-Walled Composite I–Beams for Subcomponent Testing of Wind Turbine Blades, Wind Eng., 41, 297, 10.1177/0309524X17709924 · DOI
  89. 2017, Experimental and Theoretical Similitude Analysis for Flexural Bending of Scaled-Down Laminated I–Beams, Compos. Struct., 176, 812, 10.1016/j.compstruct.2017.06.017 · DOI
  90. P.Thakre, 2018, Scaled Composites I–Beams for Subcomponent Testing of Wind Turbine Blades: An Experimental Study
  91. 2017, Similitude Analysis of the Frequency Response Function for Scaled Structures
  92. 2010, On the Use of the Asymptotic Scaled Modal Analysis for the Time-Harmonic Structural Analysis and for the Prediction of Coupling Loss Factors for Similar Systems, Mech. Syst. Signal Process., 24, 455, 10.1016/j.ymssp.2009.07.008 · DOI
  93. 2008, Investigation of Scaling Effects in Fiber-Metal Laminates, J. Compos. Mater., 42, 821
  94. 1998, Suggestion of a New Dimensionless Number for Dynamic Plastic Response of Beams and Plates, Archive Appl. Mech., 68, 524, 10.1007/s004190050184 · DOI
  95. 1972, Impact Strength of Materials
  96. 1999, Similarity Consideration of Structural Bifurcation Buckling, Forschung Ingenieurwesen, 65, 107, 10.1007/PL00010868 · DOI
  97. 1998, Effect of Flexibility on Low Velocity Impact Response, J. Sound Vib., 217, 563, 10.1006/jsvi.1998.1807 · DOI
  98. 2009, Scaling of Low-Velocity Impact Response in Composite Structures, Compos. Struct., 91, 358, 10.1016/j.compstruct.2009.06.002 · DOI
  99. 1994, On the Scaling of Impact Loaded Composite Beams, Compos. Struct., 27, 357, 10.1016/0263-8223(94)90262-3 · DOI
  100. 1988, Progressive Transverse Cracking in Composite Laminates, J. Compos. Mater., 22, 1563
  101. 1997, A Note on the Geometric Scaling of Long-Rod Penetration, Int. J. Impact Eng., 19, 277, 10.1016/S0734-743X(96)00023-1 · DOI
  102. 1991, High Velocity Penetration of Steel Targets, Int. J. Impact Eng., 11, 107, 10.1016/0734-743X(91)90034-D · DOI
  103. 1993, Computer Simulations of Strain-Rate Effects in Replica Scale Model Penetration Experiments, Int. J. Impact Eng., 13, 35, 10.1016/0734-743X(93)90107-I · DOI
  104. Magness, L., and Farrand, T., 1990, “Deformation Behavior and Its Relationship to the Penetration Performance of High Density KE Penetrator Materials,” Army Science Conference, Durham, NC, June 12–15.
  105. 2004, Scaling Impacted Structures, Archive Appl. Mech., 74, 130, 10.1007/s00419-004-0343-8 · DOI
  106. 2006, Scaling the Impact of a Mass on a Structure, Int. J. Impact Eng., 32, 1158, 10.1016/j.ijimpeng.2004.09.009 · DOI
  107. 2006, Scaling Impacted Structures When the Prototype and the Model Are Made of Different Materials, Int. J. Solids Struct., 43, 2744, 10.1016/j.ijsolstr.2005.03.003 · DOI
  108. 2009, Scaling Structures Subject to Impact Loads When Using a Power Law Constitutive Equation, Int. J. Solids Struct., 46, 3412, 10.1016/j.ijsolstr.2009.05.014 · DOI
  109. 2012, Predicting the Behaviour of Structures Under Impact Loads Using Geometrically Distorted Scaled Models, J. Mech. Phys. Solids, 60, 1330, 10.1016/j.jmps.2012.03.005 · DOI
  110. 2004, Aeroelastic Scaling for Rotary-Wing Aircraft With Applications, J. Fluids Struct., 19, 635, 10.1016/j.jfluidstructs.2004.03.003 · DOI
  111. 2012, Dynamic Hydroelastic Scaling of the Underwater Shock Response of Composite Marine Structures, ASME J. Appl. Mech., 79, 014501, 10.1115/1.4004535 · DOI
  112. 2010, Dynamic Hydroelastic Scaling of Self-Adaptive Composite Marine Rotors, Compos. Struct., 92, 97, 10.1016/j.compstruct.2009.07.001 · DOI
  113. 2002, Scaling Laws for Vibration Response of Anti-Symmetrically Laminated Plates, Struct. Eng. Mech., 14, 1
  114. 2003, Similitude Invariants and Scaling Laws for Buckling Experiments on Anti-Symmetrically Laminated Plates Subjected to Biaxial Loading, Compos. Struct., 59, 455, 10.1016/S0263-8223(02)00289-1 · DOI
  115. 2003, Buckling Similitude Invariants of Symmetrically Laminated Plates Subjected to Biaxial Loading, Compos. Struct., 59, 455, 10.1016/S0263-8223(02)00289-1 · DOI
  116. 2005, Scaling Laws for Buckling of Polar Orthotropic Annular Plates Subjected to Compressive and Torsional Loading, Thin-Walled Struct., 43, 1115, 10.1016/j.tws.2004.11.004 · DOI
  117. 2008, Experimental Investigation Into the Use of Scaling Laws for Predicting Vibration Responses of Rectangular Thin Plates, J. Sound Vib., 311, 314, 10.1016/j.jsv.2007.09.006 · DOI
  118. 2008, A Scaling Procedure for the Response of an Isolated System With High Modal Overlap Factor, Mech. Syst. Signal Process., 22, 1549, 10.1016/j.ymssp.2008.01.007 · DOI
  119. Martini, L., D., Rosa, S., and Franco, F., 2004, “The Structural Response of a Three Plate Assembly by Scaled Finite Element Method,” ISMA, Leuven, Belgium, Sept. 20–22, pp. 1539–1554.
  120. 2008, Exact and Numerical Responses of a Plate Under a Turbulent Boundary Layer Excitation, J. Fluids Struct., 24, 212, 10.1016/j.jfluidstructs.2007.07.007 · DOI
  121. 2010, Scaling for the Ensemble Statistics Prediction of a Random System Subjected to Harmonic Excitations, J. Acoust. Soc. Am., 127, EL203, 10.1121/1.3397254 · DOI
  122. 2010, A Scaling Approach for the Prediction of the High-Frequency Mean Responses of Vibrating Systems, J. Acoust. Soc. Am., 127, EL209, 10.1121/1.3397257 · DOI
  123. 2015, Numerical and Experimental Results for the Frequency Response of Plates in Similitude, Proc. Inst. Mech. Eng., Part C, 230, 3212, 10.1177/0954406215610148 · DOI
  124. Robin, O., De Rosa, S., and Berry, A., 2016, “Similitudes for the Structural Response and Radiated Power From Plates,” 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future (INTER-NOISE), Hamburg, Germany, Aug. 21–24, pp. 5421–5430.
  125. 2016, A Scaling Procedure for Panel Vibro-Acoustic Response Induced by Turbulent Boundary Layer, J. Sound Vib., 380, 165, 10.1016/j.jsv.2016.05.040 · DOI
  126. 2013, Study of the Structure Size Interval of Incomplete Geometrically Similitude Model of the Elastic Thin Plates, J. Meas. Eng., 1, 207
  127. 2014, Determination Method of the Structure Size Intervals of Dynamic Distorted Model of Elastic Cantilever Thin Plate, Adv. Mech. Eng., 2014, 1, 10.1155/2014/791047 · DOI
  128. 2016, The Dynamic Similitude Design Method of Thin Walled Structures and Experimental Validation, Shock Vib., 2016, 6836183, 10.1155/2016/6836183 · DOI
  129. Ambur, D. R., Chunchu, P. B., Rose, C. A., Feraboli, P., and Jackson, W. C., 2005, “Scaling the Non-Linear Impact Response of Flat and Curved Composite Panels,” AIAA Paper No. 2005-2224.10.2514/6.2005-2224 · DOI
  130. 2007, Scaling of Impact on Low Fibre-Volume Glass-Polyester Laminates, Compos. Part A, 38, 307, 10.1016/j.compositesa.2006.04.003 · DOI
  131. 2008, Scale Effects on the Response of Composite Structures Under Impact Loading, Eng. Fract. Mech., 75, 2725, 10.1016/j.engfracmech.2007.03.001 · DOI
  132. 2016, An Experimental and Numerical Study on Scaling Effects in the Low Velocity Impact Response of CFRP Laminates, Compos. Struct., 154, 69, 10.1016/j.compstruct.2016.07.029 · DOI
  133. 2013, Similitude Study of Impacted Composite Under Buckling Loading, J. Eng. Mech., 139, 1334, 10.1061/(ASCE)EM.1943-7889.0000560 · DOI
  134. 2004, Scaling Aspects of Quadrangular Plates Subjected to Localised Blast Loads—Experiments and Predictions, Int. J. Impact Eng., 30, 1179, 10.1016/j.ijimpeng.2004.03.012 · DOI
  135. 2007, Scaling the Response of Circular Plates to Large and Close Range Spherical Explosions—Part I: Air-Blast Loading, Int. J. Impact Eng., 34, 859, 10.1016/j.ijimpeng.2006.04.001 · DOI
  136. 2007, Scaling the Response of Circular Plates to Large and Close Range Spherical Explosions—Part II: Buried Charges, Int. J. Impact Eng., 34, 874, 10.1016/j.ijimpeng.2006.04.002 · DOI
  137. 2009, Springback of Circular Clamped Armor Steel Plates Subjected to Spherical Air-Blast Loading, Int. J. Impact Eng., 36, 53, 10.1016/j.ijimpeng.2008.04.008 · DOI
  138. 2014, Scaling Dynamic Failure: A Numerical Study, Int. J. Impact Eng., 69, 69, 10.1016/j.ijimpeng.2014.02.011 · DOI
  139. 1989, Structural Impact
  140. 2006, Adiabatic Shear Failure and Dynamic Stored Energy of Cold Work, Phys. Rev. Lett., 96, 075502, 10.1103/PhysRevLett.96.075502 · DOI
  141. 2000, On Dimensionless Numbers for Dynamic Plastic Response of Structural Members, Archive Appl. Mech., 70, 245, 10.1007/s004199900072 · DOI
  142. 1989, Deformation of Thin Plates Subjected to Impulsive Loading–A Review—Part I: Theoretical Considerations, Int. J. Impact Eng., 8, 159, 10.1016/0734-743X(89)90014-6 · DOI
  143. 1989, Deformation of Thin Plates Subjected to Impulsive Loading–A Review—Part II: Experimental Studies, Int. J. Impact Eng., 8, 171, 10.1016/0734-743X(89)90015-8 · DOI
  144. 2016, Structural Similitude for Prestressed Vibration and Buckling of Eccentrically Stiffened Circular Cylindrical Panels and Shells by Energy Approach, Int. J. Struct. Stab. Dyn., 16, 1550074, 10.1142/S0219455415500741 · DOI
  145. 1999, Similitude Study for a Laminated Cylindrical Tube Under Tensile, Torsion, Bending, Internal and External Pressure—Part I: Governing Equations, Compos. Struct., 44, 221, 10.1016/S0263-8223(98)00068-3 · DOI
  146. 1999, Similitude Study for a Laminated Cylindrical Tube Under Tensile, Torsion, Bending, Internal and External Pressure—Part II: Scale Models, Compos. Struct., 44, 231, 10.1016/S0263-8223(98)00069-5 · DOI
  147. 2003, Scaling Law and Physical Similitude for Buckling and Vibration of Antisymmetric Angle-Ply Laminated Cylindrical Shells, Int. J. Struct. Stab. Dyn., 3, 567, 10.1142/S0219455403001051 · DOI
  148. 2003, Similitude and Physical Modeling for Buckling and Vibration of Symmetric Cross-Ply Laminated Circular Cylindrical Shells, J. Compos. Mater., 37, 1697, 10.1177/002199803035191 · DOI
  149. 2007, Structural Similitude and Scaling Laws of Anti-Symmetric Cross-Ply Laminated Cylindrical Shells for Buckling and Vibration Experiments, Int. J. Struct. Stab. Dyn., 7, 609, 10.1142/S0219455407002459 · DOI
  150. 1997, Scaling Laws of Cylindrical Shells Under Lateral Pressure, AIAA J., 35, 1669, 10.2514/2.8 · DOI
  151. 2012, SAMSARA for Thin Cylindrical Shells, 048-1
  152. 2015, Analytical Similitudes Applied to Thin Cylindrical Shells, Adv. Aircr. Spacecr. Sci., 2, 403, 10.12989/aas.2015.2.4.403 · DOI · Paper page
  153. 2009, Structural Similitude in Free Vibration of Orthogonally Stiffened Cylindrical Shells, Thin-Walled Struct., 47, 1316, 10.1016/j.tws.2009.03.013 · DOI
  154. 2006, Size Effects in the Axial Tearing of Circular Tubes During Quasi-Static and Impact Loadings, Int. J. Impact Eng., 32, 2048, 10.1016/j.ijimpeng.2005.07.001 · DOI
  155. 2007, Scale and Size Effects on Dynamic Response and Damage of Glass/Epoxy Tubular Structures, J. Compos. Mater., 41, 71, 10.1177/0021998306065287 · DOI
  156. 2000, A Historical Perspective on Dynamics Testing at the Langley Research Center
  157. 1964, A Study on the Effectiveness of Various Methods of Vibration Reduction on Simplified Scale Models of the Nimbus Spacecraft
  158. 1967, Dynamic Model Investigation of Touchdown Stability of Lunar-Landing Vehicles
  159. 1971, Investigation of Technique for Conducting Landing-Impact Tests at Simulated Planetary Gravity
  160. 1973, Experimental Validation of a Landing-Dynamics Computer Program for Legged Spacecraft Landers
  161. 1964, Experimental Lateral Vibration Characteristics of a 1/5-Scale Model of Saturn SA-1 With an Eight-Cable Suspension System
  162. 1967, An Investigation of the Response of a Scaled Model of a Liquid-Propellant Multistage Launch Vehicle to Longitudinal Excitation
  163. 1967, Design and Fabrication Considerations for a 1/10-Scale Replica Model of the Apollo/Saturn
  164. 1970, Application of Analysis and Models to Structural Dynamic Problems Related to the Apollo-Saturn V Launch Vehicle
  165. 1968, Experimental Vibration Characteristics of a 1/40-Scale Dynamic Model of the Saturn V–Launch–Umbilical-Tower Configuration
  166. 1968, Vibration Analysis of a 1/40-Scale Dynamic Model of Saturn V–Launch-Platform–Umbilical-Tower Configuration
  167. 1975, Analytical and Experimental Vibration Studies of a 1/8-Scale Shuttle Orbiter
  168. 1971, Vibration Analysis of a 1/15 Scale Dynamic Model of a Space Shuttle Configuration
  169. 1974, Analytical and Experimental Investigation of a 1/8-Scale Dynamic Model of the Shuttle Orbiter
  170. 1974, Analytical and Experimental Investigation of a 1/8-Scale Dynamic Model of the Shuttle Orbiter
  171. 1974, Development of Technology for Fluid-Structure Interaction Modeling of a 1/8-Scale Dynamic Model of the Shuttle External Tank (ET)—Volume I: Technical Report
  172. 1974, Development of Technology for Fluid-Structure Interaction Modeling of a 1/8-Scale Dynamic Model of the Shuttle External Tank (ET)—Volume I: Supporting Data, Appendixes A Through B
  173. Keith Belvin, W., and Edighoffer, H. E., 1986, “15 Meter Hoop-Column Antenna Dynamics: Test and Analysis,” First NASA/DOD CSI Technology Conference, National Aeronautics and Space Administration, Norfolk, VA, Nov. 18–21, pp. 167–185.
  174. Letchworth, R., McGowan, P. E., and Gronet, M. J., 1988, “Space Station: A Focus for the Development of Structural Dynamic Scale Model for Large Flexible Space Structures,” AIAA/ASME/ASCE/AHS 29th SDM Conference, Greenbelt, MD, pp. 1–10. · DOI
  175. Canfield, S. L., Beard, J. W., Peddieson, J., Ewing, A., Garbe, G., 2004, “Similarity Rules for Scaling Solar Sail Systems,” Solar Sail Technology and Application Conference (SSTAC), Greenbelt, MD, pp. 1–10.
  176. Murphy, D. M., Macy, B., and Gaspar, J. L., 2004, “Demonstration of a 10-m Solar Sail System,” AIAA Paper No. 2004-1576.10.2514/6.2004-1576 · DOI
  177. Gaspar, J. L., Mann, T., Behun, V., Macy, B., Barker, P., and Murphy, D. M., 2006, “Testing of a 10-Meter Quadrant Solar Sail,” IMAC—XXIV Conference and Exposition on Structural Dynamics, Sant Louis, MO, Jan. 30–Feb. 2.
  178. Laue, G., Case, D., and Moore, J., 2005, “Fabrication and Deployment Testing of Solar Sail Quadrants for a 20-Meter Solar Sail Ground Test System Demonstration,” AIAA Paper No. 2005-3930.10.2514/6.2005-3930 · DOI
  179. 1999, The Nodal Concept of Deployment and the Scale Model Testing of Its Application to a Membrane Antenna, 10.2514/6.1999-1523 · DOI
  180. Holland, D. B., Virgin, L. N., Tinker, M. L., and Slade, K. N., 2002, “Geometric Scaling Properties of Inflatable Structures for Use in Space Solar Power Generation,” AIAA Paper No. 2002-1264.10.2514/6.2002-1264 · DOI
  181. 1996, Aeroelasticity
  182. French, M., 1990, “An Application of Structural Optimization in Wind Tunnel Model Design,” AIAA Paper No. 90-0956-CP.10.2514/6.1990-956 · DOI
  183. 1996, Aeroelastic Model Design Using Parameter Identification, J. Aircr., 33, 198, 10.2514/3.46922 · DOI
  184. Pereira, P., Almeida, L., Suleman, A., Bond, V., Canfield, R., and Blair, M., 2007, “Aeroelastic Scaling and Optimization of a Joined-Wing Aircraft Concept,” AIAA Paper No. 2007-1889.10.2514/6.2007-1889 · DOI
  185. Heeg, J., Spain, C. V., and Rivera, J. A., 2004, “Wind Tunnel to Atmospheric Mapping for Static Aeroelastic Scaling,” AIAA Paper No. 2004-2044.10.2514/6.2004-2044 · DOI
  186. Richards, J., Suleman, A., Canfield, R. A., and Blair, M., 2009, “Design of a Scaled RPV for Investigation of Gust Response of Joined-Wing Sensorcraft,” AIAA Paper No. 2009-2218.10.2514/6.2009-2218 · DOI
  187. Ricciardi, A. P., Canfield, R. A., Patil, M. J., and Lindsley, N., 2012, “Nonlinear Aeroelastic Scaling of a Joined Wing Aircraft,” AIAA Paper No. 2012-1454.10.2514/6.2012-1454 · DOI
  188. 2014, Nonlinear Aeroelastic-Scaled-Model Optimization Using Equivalent Static Loads, J. Aircr., 51, 1842, 10.2514/1.C032539 · DOI
  189. 2017, Nonlinear Aeroelastic Scaling of High Aspect-Ratio Wings, Aerosp. Sci. Technol., 63, 363, 10.1016/j.ast.2017.01.010 · DOI
  190. Ricciardi, A. P., Eger, C. A. G., Canfield, R. A., Patil, M. J., and Lindsley, N., 2012, “High Fidelity Nonlinear Aeroelastic Analysis for Scaled Vehicle Design,” AIAA Paper No. 2012-562410.2514/6.2012-5624. · DOI
  191. Presente, E. H., and Friedmann, P. P., 1998, “Aeroservoelasticity in Subsonic Flow and Associated Scaling Laws,” AIAA Paper No. 97-1079.10.2514/6.1997-1079 · DOI
  192. 1997, Adaptive Control of Aeroelastic Instabilities in Transonic Flow and Its Scaling, J. Guid. Control Dyn., 20, 1190, 10.2514/2.4175 · DOI
  193. Presente, E. H., and Friedmann, P. P., 1998, “Aeroservoelasticity in Compressible Flow and Its Scaling Laws,” AIAA Paper No. 98-1899.10.2514/6.1998-1899 · DOI
  194. Friedmann, P. P., 1999, “Rotary-Wing Aeroelastic Scaling and Its Implications for the Adaptive-Materials-Based Actuation,” Symposium on Smart Structures and Materials, International Society for Optics and Photonics, International Society for Optics and Photonics, Newport Beach, CA, June 9, pp. 60–79. · DOI
  195. Pototzky, A. S., 2002, “Scaling Laws Applied to a Modal Formulation of the Aeroservoelastic Equations,” AIAA Paper No. 2002-1598.10.2514/6.2002-1598 · DOI
  196. 1965, Thermal Scale Modeling, Astronaut. Aeronaut., 34
  197. 1997, Pseudodynamic Testing of Scaled Models, J. Struct. Eng., 123, 524, 10.1061/(ASCE)0733-9445(1997)123:4(524) · DOI
  198. 1996, Damage Evaluation in Steel Box Columns by Pseudodynamic Tests, J. Struct. Eng., 122, 635, 10.1061/(ASCE)0733-9445(1996)122:6(635) · DOI
  199. Kim, N. S., Kwak, Y. H., and Chang, S. P., 2004, “Pseudodynamic Tests on Small-Scale Steel Models Using the Modified Similitude Law,” 13th World Conference of Earthquake Engineering, Vancouver, Canada, Aug. 1–6, Paper No. 3360.
  200. 2009, Equivalent Multi-Phase Similitude Law for Pseudodynamic Test on Small Scale Reinforced Concrete Models, Eng. Struct., 31, 834, 10.1016/j.engstruct.2008.06.008 · DOI

200 of 303 shown

Cited by

Sorted by citations

Metadata

Authors
Casaburo, A., Petrone, G., Franco, F., & De Rosa, S.
Affiliations
  • Pasta-Lab, Department of Industrial Engineering, Università degli Studi di Napoli Federico II, Via Claudio 21, Napoli 80125, Italy e-mail:
  • Assistant Professor Pasta-Lab, Department of Industrial Engineering, Università degli Studi di Napoli Federico II, Via Claudio 21, Napoli 80125, Italy e-mail:
  • Professor Pasta-Lab, Department of Industrial Engineering, Università degli Studi di Napoli Federico II, Via Claudio 21, Napoli 80125, Italy e-mail:
Venue
Applied Mechanics Reviews
Publisher
ASME International
Published
2019-05-01
Volume
71
Issue
3
ISSN
  • 0003-6900
  • 2379-0407
DOI
10.1115/1.4043787
Cited by
197
References
0
Language
en

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review