Design Repository Effectiveness for 3D Convolutional Neural Networks: Application to Additive Manufacturing
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
Machine learning can be used to automate common or time-consuming engineering tasks for which sufficient data already exist. For instance, design repositories can be used to train deep learning algorithms to assess component manufacturability; however, methods to determine the suitability of a design repository for use with machine learning do not exist. We provide an initial investigation toward identifying such a method using “artificial” design repositories to experimentally test the extent to which altering properties of the dataset impacts the assessment precision and generalizability of neural networks trained on the data. For this experiment, we use a 3D convolutional neural network to estimate quantitative manufacturing metrics directly from voxel-based component geometries. Additive manufacturing (AM) is used as a case study because of the recent growth of AM-focused design repositories such as GrabCAD and Thingiverse that are readily accessible online. In this study, we focus only on material extrusion, the dominant consumer AM process, and investigate three AM build metrics: (1) part mass, (2) support material mass, and (3) build time. Additionally, we compare the convolutional neural network accuracy to that of a baseline multiple linear regression model. Our results suggest that training on design repositories with less standardized orientation and position resulted in more accurate trained neural networks and that orientation-dependent metrics were harder to estimate than orientation-independent metrics. Furthermore, the convolutional neural network was more accurate than the baseline linear regression model for all build metrics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adam: A Method for Stochastic Optimization
Kingma, D. P., & Ba, J. (2014) · arXiv · doi:10.48550/arxiv.1412.6980 · Cited by 98,946
ShapeNet: An Information-Rich 3D Model Repository
Chang, A. X., Funkhouser, T., Guibas, L., Hanrahan, P., Huang, Q., Li, Z., Savarese, S., Savva, M., Song, S., Su, H., et al. (2015) · arXiv · doi:10.48550/arxiv.1512.03012 · Cited by 2,330
Gu, G. X., Chen, C.-T., Richmond, D. J., & Buehler, M. J. (2018) · Materials Horizons · doi:10.1039/c8mh00653a · Cited by 556
Deep MRI brain extraction: A 3D convolutional neural network for skull stripping
Kleesiek, J., Urban, G., Hubert, A., Schwarz, D., Maier-Hein, K., Bendszus, M., & Biller, A. (2016) · NeuroImage · doi:10.1016/j.neuroimage.2016.01.024 · Cited by 505 · cited 1×
“Other problems require voxel-by-voxel classi fi cation solutions, such as a 3D CNN developed to separate magnetic resonance imaging scans of head matter into skull and nonskull regions for diagnostic purposes [15].”
MethodDetecting cyber-physical attacks in CyberManufacturing systems with machine learning methods
Wu, M., Song, Z., & Moon, Y. B. (2019) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-017-1315-5 · Cited by 238 · cited 1×
“…ML to AM in many ways, demonstrating potential improvements to diverse applications including process optimization [27 – 33], manufacturing defect detection and control [34 – 41], cyber-security [42 – 44], dimensional accuracy analysis [9,45 – 47], and material property prediction [48 – 51].”
BackgroundBaturynska, I., Semeniuta, O., & Martinsen, K. (2018) · Procedia CIRP · doi:10.1016/j.procir.2017.12.204 · Cited by 182
Machine-learning based design of active composite structures for 4D printing
Hamel, C. M., Roach, D. J., Long, K. N., Demoly, F., Dunn, M. L., & Qi, H. J. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab1439 · Cited by 159
Cited by
A review on machine learning in 3D printing: applications, potential, and challenges
Goh, G. D., Sing, S. L., & Yeong, W. Y. (2021) · Artificial Intelligence Review · doi:10.1007/s10462-020-09876-9 · Cited by 652
Decoding the agility of artificial intelligence-assisted human design teams
Song, B., Gyory, J. T., Zhang, G., Soria Zurita, N. F., Stump, G., Martin, J., Miller, S., Balon, C., Yukish, M., McComb, C., et al. (2022) · Design Studies · doi:10.1016/j.destud.2022.101094 · Cited by 59
Self-citationGyory, J. T., Soria Zurita, N. F., Martin, J., Balon, C., McComb, C., Kotovsky, K., & Cagan, J. (2022) · Journal of Mechanical Design · doi:10.1115/1.4052488 · Cited by 56
Self-citationFOCUS AND MODALITY: DEFINING A ROADMAP TO FUTURE AI-HUMAN TEAMING IN DESIGN
McComb, C., Boatwright, P., & Cagan, J. (2023) · Proceedings of the Design Society · doi:10.1017/pds.2023.191 · Cited by 26
Self-citationDing, N., Chen, M., & Hu, L. (2025) · Acta Psychologica · doi:10.1016/j.actpsy.2025.105650 · Cited by 11
Metadata
- Authors
- Williams, G., Meisel, N. A., Simpson, T. W., & McComb, C.
- Venue
- Journal of Mechanical Design
- Publisher
- ASME International
- Published
- 2019-09-16
- Volume
- 141
- Issue
- 11
- ISSN
- 0161-8458 (ISSN-L)
- 1050-0472
- 1528-9001
- OpenAlex
- W2957350396
- Cited by
- 93
- References
- 7
- FWCI
- 4.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design Repository Effectiveness for 3D Convolutional Neural Networks: Application to Additive Manufacturing. https://app.cochat.ai/papers/10.1115/1.4044199
- The paper
- Williams, G., Meisel, N. A., Simpson, T. W., & McComb, C. (2019). Design Repository Effectiveness for 3D Convolutional Neural Networks: Application to Additive Manufacturing. Journal of Mechanical Design. https://doi.org/10.1115/1.4044199
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.