CoChat

Biochar From Cocoa Shell Pyrolysis: Potential Sorbent for CO2 Capture

Najafabadi, Hamed Abedini, Ozalp, Nesrin, Davis, Richard A. · 2021 · Journal of Energy Resources Technology

The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.

Abstract

Abstract Biochar produced from slow pyrolysis of cocoa shells was studied as a sorbent for CO2 capture. Three cocoa shell samples obtained from Papua New Guinea, Peru, and Colombia were studied. Thermogravimetric analysis showed that the first three stages of degradation were quite similar for different cocoa shell sources. However, the fourth stage was different, which could be due to the different lignin content in the cocoa shell sources. Chemical analysis showed that the cocoa shell biochar had a lower content of carbon and oxygen, and a higher content of magnesium, potassium, and calcium compared with the cocoa shell. CO2 uptake performance of the cocoa shell biochar was examined and compared with a commercial activated carbon using a thermogravimeter at atmospheric pressure and ambient temperature. The final CO2 uptake after 30 min was slightly higher for cocoa shell biochar. However, activated carbon had a faster adsorption response, and it approached equilibrium faster than the cocoa shell biochar. This could be due to differences in particle size, pore structure, and surface area of the activated carbon which allows the CO2 to be adsorbed easily in its porous structure. A pseudo-second-order model of kinetics fits the CO2 adsorption behavior of cocoa shell biochar and activated carbon indicating that the rate-limiting step is chemical adsorption. Furthermore, the stability of the cocoa shell sorbent was confirmed over four adsorption/desorption cycles. By considering the simplicity of the production process and efficiency of CO2 adsorption, cocoa shell biochar can be considered a good option for CO2 capture.

Overview

Integrity signals

Registry

Crossref · 10.1115/1.4047765

Cites

28 of 28 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Research works printed but not linked: 2

  1. Gregg, 1982, Adsorption, Surface and Porosity
  2. Davis, 2018, Practical Numerical Methods for Chemical Engineers Using Excel With VBA

Cited by

See all 20

Metadata

Authors
Najafabadi, H. A., Ozalp, N., & Davis, R. A.
Affiliations
  • Iran University of Science and Technology (IR)
  • Department of Mechanical and Civil Engineering, Purdue University Northwest, Hammond, IN 46323
  • University of Minnesota, Duluth (US)
Venue
Journal of Energy Resources Technology
Publisher
Wiley
Published
2020-08-07
Volume
143
Issue
2
ISSN
  • 0195-0738 (ISSN-L)
  • 1528-8994
OpenAlex
W3041571644
Cited by
19
References
28
Citations by year
2025: 4 · 2024: 4 · 2023: 3 · 2022: 7 · 2021: 1
FWCI
1.35
Type
journal article
Language
en
Open access
closed
Locations
Journal of Energy Resources Technology (publishedVersion)
Topics
  • Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
  • Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
  • Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
Keywords
biochar, cocoa shell, slow pyrolysis, CO2 capture, CO2 adsorption, sorbents, activated carbon, lignin content, adsorption kinetics, pseudo-second-order kinetics, chemisorption, adsorbent stability, agricultural waste valorization

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.