The DOI matches its Crossref record.
Stress and Deformation Evaluations of Scanning Strategy Effect in Selective Laser Melting
Abstract
Selective laser melting (SLM) is one of the Additive manufacturing (AM) processes that can build physical part in an added material method from digital data. In such a process, computer designed part model will be decomposed into hundreds of thousands of layers. The layered information is then transferred to SLM equipment and the part is built in a layer by layer fashion. Each powder layer will be scanned and melted in the required region by a high energy laser beam in a given scanning pattern so as to form a desired geometry. Finally, fully functional parts can be produced by repeatedly powder deposition, melting and solidification process. This process offers numerous advantages such as tooling-free productions and design freedom in geometry. In addition, SLM process is quite suitable for complicated parts such as customer designed medical implants and internal channels which are difficult to manufacture by conventional methods such as casting and machining. However, the localized heating and cooling process can lead to defects such as high residual stress, part distortion or delamination failure in SLM fabricated parts. These potential defects may impede the wide application of this technology. It is known that the laser beam scanning path will affect the thermomechanical behaviors of the build part, and thus, altering the scanning pattern may be a feasible strategy to reduce residual stresses and deformations by influencing the heat intensity input distribution. In this study, a 3D sequentially coupled finite element method (FEM) model, incorporating a volumetric moving Gaussian heat source, powder as well as solid material temperature dependent properties and layer addition features, was developed to study the complex thermomechanical process of SLM. The model was applied to evaluate six different scanning strategies effect on part temperature, stress and deformation. The major results have been summarized as follows. (1) Among all cases tested, the out-in scanning pattern has the maximum stresses along the X and Y directions; while the 45 degree inclined scanning may reduce residual stresses in both directions. (2) Large directional stress difference can be caused by back and forth line scanning strategy while minor directional stress difference is observed for other tested cases. (3) X and Y directional stress concentration is shown around the edge of deposited layers and the interface between deposited layers and substrate for all cases. (4) The 45 degree inclined scanning case has the smallest build direction deformation while the in-out scanning case has the largest deformation among the tested cases.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
Additive manufacturing of steels: a review of achievements and challenges
Haghdadi, N., Laleh, M., Moyle, M., & Primig, S. (2021) · Journal of Materials Science · doi:10.1007/s10853-020-05109-0 · Cited by 622
An overview of residual stresses in metal powder bed fusion
Bartlett, J. L., & Li, X. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.02.020 · Cited by 616
Mechanistic models for additive manufacturing of metallic components
Wei, H. L., Mukherjee, T., Zhang, W., Zuback, J. S., Knapp, G. L., De, A., & DebRoy, T. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100703 · Cited by 530
Trevisan, F., Calignano, F., Lorusso, M., Pakkanen, J., Aversa, A., Ambrosio, E., Lombardi, M., Fino, P., & Manfredi, D. (2017) · Materials · doi:10.3390/ma10010076 · Cited by 502
Metadata
- Authors
- Cheng, B., Shrestha, S., & Chou, Y. K.
- Venue
- Volume 3: Joint MSEC-NAMRC Symposia
- Published
- 2016-06-27
- OpenAlex
- W2404176907
- Cited by
- 250
- References
- 0
- FWCI
- 81.95
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Stress and Deformation Evaluations of Scanning Strategy Effect in Selective Laser Melting. https://app.cochat.ai/papers/10.1115/msec2016-8819
- The paper
- Cheng, B., Shrestha, S., & Chou, Y. K. (2016). Stress and Deformation Evaluations of Scanning Strategy Effect in Selective Laser Melting. Volume 3: Joint MSEC-NAMRC Symposia. https://doi.org/10.1115/msec2016-8819
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.