The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Thin film reaction of transition metals with germanium
Abstract
A systematic study of the thermally induced reaction of 20 transition metals (Ti, Zr, Hf, V, Nb, Ta, Cr, Mo, W, Mn, Re, Fe, Ru, Co, Rh, Ir, Ni, Pd, Pt, and Cu) with Ge substrates was carried out in order to identify appropriate contact materials in Ge-based microelectronic circuits. Thin metal films, nominally 30nm thick, were sputter deposited on both amorphous Ge and crystalline Ge(001). Metal-Ge reactions were monitored in situ during ramp anneals at 3°Cs−1 in an atmosphere of purified He using time-resolved x-ray diffraction, diffuse light scattering, and resistance measurements. These analyses allowed the determination of the phase formation sequence for each metal-Ge system and the identification of the most promising candidates—in terms of sheet resistance and surface roughness—for their use as first level interconnections in microelectronic circuits. A first group of metals (Ti, Zr, Hf, V, Nb, and Ta) reacted with Ge only at temperatures well above 450°C and was prone to oxidation. Another set (Cr, Mo, Mn, Re, Rh, Ru, and Ir) did not form low resistivity phases (<130μΩcm) whereas no reaction was observed in the case of W even after annealing at up to 1000°C. We found that Fe, Co, Ni, Pd, Pt, and Cu were the most interesting candidates for microelectronic applications as they reacted at relatively low temperatures (150–360°C) to form low resistivity phases (22–129μΩcm). Among those, two monogermanides, NiGe and PdGe, exhibited the lowest resistivity values (22–30μΩcm) and were stable over the widest temperature window during ramp anneals. In passing, we note that Cu, Ni, and Pd were the most effective in lowering the crystallization temperature of amorphous Ge, by up to 290°C for our typical ramp anneals at 3°Cs−1.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review on high-k dielectrics reliability issues
Ribes, G., Mitard, J., Denais, M., Bruyere, S., Monsieur, F., Parthasarathy, C., Vincent, E., & Ghibaudo, G. (2005) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2005.845236 · Cited by 533
Cited by
Evidence for strong Fermi-level pinning due to metal-induced gap states at metal/germanium interface
Nishimura, T., Kita, K., & Toriumi, A. (2007) · Applied Physics Letters · doi:10.1063/1.2789701 · Cited by 491
High-k/Ge MOSFETs for future nanoelectronics
Kamata, Y. (2008) · Materials Today · doi:10.1016/s1369-7021(07)70350-4 · Cited by 470
Si–Ge–Sn alloys: From growth to applications
Wirths, S., Buca, D., & Mantl, S. (2016) · Progress in Crystal Growth and Characterization of Materials · doi:10.1016/j.pcrysgrow.2015.11.001 · Cited by 282
Brunco, D. P., De Jaeger, B., Eneman, G., Mitard, J., Hellings, G., Satta, A., Terzieva, V., Souriau, L., Leys, F. E., Pourtois, G., et al. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2919115 · Cited by 267
Metadata
- Authors
- Gaudet, S., Detavernier, C., Kellock, A. J., Desjardins, P., & Lavoie, C.
- Venue
- Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films
- Publisher
- American Vacuum Society
- Published
- 2006-04-20
- Volume
- 24
- Issue
- 3
- Pages
- 474-485
- ISSN
- 0734-2101 (ISSN-L)
- 1520-8559
- OpenAlex
- W2083476901
- Cited by
- 235
- References
- 1
- FWCI
- 7.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thin film reaction of transition metals with germanium. https://app.cochat.ai/papers/10.1116/1.2191861
- The paper
- Gaudet, S., Detavernier, C., Kellock, A. J., Desjardins, P., & Lavoie, C. (2006). Thin film reaction of transition metals with germanium. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films. https://doi.org/10.1116/1.2191861
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.