The DOI matches its Crossref record.
Sculptured thin films and glancing angle deposition: Growth mechanics and applications
Abstract
Sculptured thin films with three dimensional microstructure controlled on the 10 nm scale were fabricated with an evaporation technique. Glancing angle deposition (GLAD) and substrate motion were employed to “sculpt” columnar thin film microstructure into desired forms ranging from zigzag shaped to helical to four-sided “square” helical. Computer control of substrate motion was used to accurately position the substrate and to achieve the desired film structures. The growth mechanics of this novel thin film deposition technique are investigated with density measurements, scanning electron microscopy analysis, and measurements of effective refractive index. Adatom diffusion and atomic shadowing are the dominant growth mechanisms with glancing angle deposition conditions creating extreme shadowing. With controlled rotation of the substrate about two axes during deposition, a dense capping layer can be produced on top of the porous sculptured films. The success of the capping process was found to be strongly dependent on the technique used, with an exponential decrease (θ∝[1−A⋅eB⋅t]) with time of incident flux angle found to be the best to reduce filling of the porous film and fracturing of the capping film. The GLAD technique was found to have potentially promising application in optical, biological, and chemical devices and materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Nanomaterials and nanoparticles: Sources and toxicity
Buzea, C., Pacheco, I. I., & Robbie, K. (2007) · Biointerphases · doi:10.1116/1.2815690 · Cited by 3,789
Self-citationEffects of synthetic micro- and nano-structured surfaces on cell behavior
Flemming, R. G., Murphy, C. J., Abrams, G. A., Goodman, S. L., & Nealey, P. F. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)00209-9 · Cited by 1,450
Chemically Powered Micro‐ and Nanomotors
Sánchez, S., Soler, L., & Katuri, J. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201406096 · Cited by 1,011
Materials Aspects of Photonic Crystals
López, C. (2003) · Advanced Materials · doi:10.1002/adma.200300386 · Cited by 977
Fu, Y. Q., Luo, J. K., Nguyen, N. T., Walton, A. J., Flewitt, A. J., Zu, X. T., Li, Y., McHale, G., Matthews, A., Iborra, E., et al. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.006 · Cited by 646
Metadata
- Authors
- Robbie, K., & Brett, M. J.
- Venue
- Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films
- Publisher
- American Vacuum Society
- Published
- 1997-05-01
- Volume
- 15
- Issue
- 3
- Pages
- 1460-1465
- ISSN
- 0734-2101 (ISSN-L)
- 1520-8559
- OpenAlex
- W1983831441
- Cited by
- 956
- References
- 0
- FWCI
- 13.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Sculptured thin films and glancing angle deposition: Growth mechanics and applications. https://app.cochat.ai/papers/10.1116/1.580562
- The paper
- Robbie, K., & Brett, M. J. (1997). Sculptured thin films and glancing angle deposition: Growth mechanics and applications. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films. https://doi.org/10.1116/1.580562
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.