Low-LER tin carboxylate photoresists using EUV
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Pure thin films of organotin compounds have been lithographically evaluated using extreme ultraviolet lithography (EUVL, 13.5 nm). Twenty-one compounds of the type R2Sn(O2CR’)2 were spin-coated from solutions in toluene, exposed to EUV light, and developed in organic solvents. Exposures produced negative-tone contrast curves and dense-line patterns using interference lithography. Contrast-curve studies indicated that the Emax values were linearly related to molecular weight when plotted separately depending upon the hydrocarbon group bound directly to tin (R = butyl, phenyl and benzyl). Additionally, Emax was found to be linearly related to free radical stability of the hydrocarbon group bound directly to tin. Dense-line patterning capabilities varied, but two resists in particular show exceptionally good line edge roughness (LER). A resist composed of an amorphous film of (C6H5CH2)2Sn(O2CC(CH3)3)2 (13) achieved 1.4 nm LER at 22 nm half-pitch patterning and a resist composed of (C6H5CH2)2Sn(O2CC6H5)2 (14) achieved 1.1 nm LER at 35 nm half-pitch at high exposure doses (600 mJ/cm2). Two photoresists that use olefin-based carboxylates, (C6H5CH2)2Sn(O2CCH=CH2)2 (11) and (C6H5CH2)2Sn(O2CC(CH3)=CH2)2 (12), demonstrated much improved photospeeds (5 mJ/ cm2 and 27 mJ/cm2) but with worse LER.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Photolithographic properties of tin-oxo clusters using extreme ultraviolet light (13.5nm)
Cardineau, B., Del Re, R., Marnell, M., Al-Mashat, H., Vockenhuber, M., Ekinci, Y., Sarma, C., Freedman, D. A., & Brainard, R. L. (2014) · Microelectronic Engineering · doi:10.1016/j.mee.2014.04.024 · Cited by 202
Cited by
Zhang, Y., Haitjema, J., Liu, X., Johansson, F., Lindblad, A., Castellanos, S., Ottosson, N., & Brouwer, A. M. (2017) · Journal of Micro/Nanopatterning Materials and Metrology · doi:10.1117/1.jmm.16.2.023510 · Cited by 67
Sharps, M. C., Frederick, R. T., Javitz, M. L., Herman, G. S., Johnson, D. W., & Hutchison, J. E. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b01440 · Cited by 60
Key Challenges and Opportunities for Advanced Extreme Ultraviolet Lithography Photoresist Materials
Li, M., & Aqad, E. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202420962 · Cited by 33
Recent Progress of Nonchemically‐Amplified Resists for High‐Resolution Lithography †
Li, H., Peng, R., Liu, Z., Lian, P., Chen, J., Yu, T., Zeng, Y., Wang, S., Guo, X., Hu, R., et al. (2026) · Chinese Journal of Chemistry · doi:10.1002/cjoc.70573 · Cited by 2
Metadata
- Authors
- Del Re, R., Sortland, M., Pasarelli, J., Cardineau, B., Ekinci, Y., Vockenhuber, M., Neisser, M., Freedman, D., & Brainard, R. L.
- Venue
- SPIE Proceedings
- Publisher
- SPIE
- Published
- 2015-03-19
- Volume
- 9422
- Pages
- 942221
- ISSN
- 0277-786X (ISSN-L)
- OpenAlex
- W1984310408
- Cited by
- 25
- References
- 1
- FWCI
- 3.31
- Type
- conference paper
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.