The DOI matches its Crossref record.
Toward self-tuning adaptive vibration-based microgenerators
Abstract
The rapidly decreasing size, cost, and power consumption of wireless sensors has opened up the relatively new research field of energy harvesting. Recent years have seen an increasing amount of research on using ambient vibrations as a power source. An important feature of all of these generators is that they depend on the resonance frequency of the generator device being matched with the frequency of the input vibrations. The goal of this paper, therefore, is to explore solutions to the problem of self-tuning vibration based energy harvesters. A distinction is made between “active” tuning actuators that must continuously supply power to achieve the resonance frequency change, and “passive” tuning actuators that supply power initially to tune the frequency, and then are able to “turn off” while maintaining the new resonance frequency. This paper analyzes the feasibility of tuning the resonance frequency of vibration based generators with “active” tuning actuators. Actuators that can tune the effective stiffness, mass, and damping are analyzed theoretically. Numerical results based for each type of actuator are presented. It is shown that only actuators that tune the effective damping will result in a net increase in power output, and only under the circumstance that no actuation power is needed to add damping. The net increase in power occurs when the mismatch between driving vibrations the mismatch between driving vibrations the resonance frequency of the device is more than 5%. Finally, the theory and numerical results are validated by experiments done on a piezoelectric generator with a smart material “active” tuning actuator.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review of power harvesting using piezoelectric materials (2003–2006)
Anton, S. R., & Sodano, H. A. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/3/r01 · Cited by 2,652
Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices
Mitcheson, P. D., Yeatman, E. M., Rao, G. K., Holmes, A. S., & Green, T. C. (2008) · Proceedings of the IEEE · doi:10.1109/jproc.2008.927494 · Cited by 1,888
Stanton, S. C., McGehee, C. C., & Mann, B. P. (2010) · Physica D: Nonlinear Phenomena · doi:10.1016/j.physd.2010.01.019 · Cited by 983
Energy harvesting from low frequency applications using piezoelectric materials
Li, H., Tian, C., & Deng, Z. D. (2014) · Applied Physics Reviews · doi:10.1063/1.4900845 · Cited by 705
A vibration energy harvesting device with bidirectional resonance frequency tunability
Challa, V. R., Prasad, M. G., Shi, Y., & Fisher, F. T. (2008) · Smart Materials and Structures · doi:10.1088/0964-1726/17/01/015035 · Cited by 675
Metadata
- Authors
- Roundy, S., & Zhang, Y.
- Venue
- SPIE Proceedings
- Publisher
- SPIE
- Published
- 2005-02-28
- Volume
- 5649
- Pages
- 373
- ISSN
- 0277-786X (ISSN-L)
- OpenAlex
- W2093283326
- Cited by
- 219
- References
- 0
- FWCI
- 14.99
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Toward self-tuning adaptive vibration-based microgenerators. https://app.cochat.ai/papers/10.1117/12.581887
- The paper
- Roundy, S., & Zhang, Y. (2005). Toward self-tuning adaptive vibration-based microgenerators. SPIE Proceedings. https://doi.org/10.1117/12.581887
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.