CoChat

Spin-induced asymmetry reaction—The formation of asymmetric carbon by electropolymerization

Open access

The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.

Abstract

We describe the spin polarization–induced chirogenic electropolymerization of achiral 2-vinylpyridine, which forms a layer of enantioenhanced isotactic polymer on the electrode. The product formed is enantioenriched in asymmetric carbon polymer. To confirm the chirality of the polymer film formed on the electrode, we also measured its electron spin polarization properties as a function of its thickness. Two methods were used: First, spin polarization was measured by applying magnetic contact atomic force microscopy, and second, magnetoresistance was assessed in a sandwich-like four-point contact structure. We observed high spin-selective electron transmission, even for a layer thickness of 120 nm. A correlation exists between the change in the circular dichroism signal and the change in the spin polarization, as a function of thickness. The spin-filtering efficiency increases with temperature.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1126/sciadv.abq2727

Cites

38 of 38 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1. Schematic and a proposed mechanism of the electropolymerization process of 2-vinylpyridine. (A) Schematic of the electropolymerization process of 2-vinylpyridine (25). (B) Schematic of a proposed mechanism for enantioselective polymerization in the presence of spin-polarized electrons. After the adsorption of the first monomer on the electrode (yellow), a second monomer is adsorbed either in the pro–right-handed (A) or in the pro–left-handed (B) configuration. Spin-polarized electrons are transferred from the electrode into the complex formed. Which spin polarization is injected depends on the magnetization direction of the substrate. One spin-polarized electron (the sphere with an arrow) is preferred for the right-handed configuration, and the opposite spin is preferentially transferred for the left-handed structure. The asymmetric carbon is denoted in green. The sequential polymerization continues, and accordingly, either right-handed (A′) or left-handed structures (B′) are formed. No evidence for the secondary structure of the polymer could be obtained.
Fig. 1. Schematic and a proposed mechanism of the electropolymerization process of 2-vinylpyridine. (A) Schematic of the electropolymerization process of 2-vinylpyridine (25). (B) Schematic of a proposed mechanism for enantioselective polymerization in the presence of spin-polarized electrons. After the adsorption of the first monomer on the electrode (yellow), a second monomer is adsorbed either in the pro–right-handed (A) or in the pro–left-handed (B) configuration. Spin-polarized electrons are transferred from the electrode into the complex formed. Which spin polarization is injected depends on the magnetization direction of the substrate. One spin-polarized electron (the sphere with an arrow) is preferred for the right-handed configuration, and the opposite spin is preferentially transferred for the left-handed structure. The asymmetric carbon is denoted in green. The sequential polymerization continues, and accordingly, either right-handed (A′) or left-handed structures (B′) are formed. No evidence for the secondary structure of the polymer could be obtained.CC BY-NC · PubMed Central
Fig. 2. CD results of PVP layer on Ni-Au–coated quartz substrate. CD spectra measured at various time intervals from 2 to 7 min during the electropolymerization of 2-vinylpyridine in the presence of the north magnetic pole of the Ni-Au–coated quartz substrate pointing away from the solution (Mag down) (A) and toward the solution (Mag up) (B). (C) The change in the CDmax values during polymerization as a function of polymerization time. (D) The change in the g factor as a function of the thickness of the polymer layer. Mag, magnet.
Fig. 2. CD results of PVP layer on Ni-Au–coated quartz substrate. CD spectra measured at various time intervals from 2 to 7 min during the electropolymerization of 2-vinylpyridine in the presence of the north magnetic pole of the Ni-Au–coated quartz substrate pointing away from the solution (Mag down) (A) and toward the solution (Mag up) (B). (C) The change in the CDmax values during polymerization as a function of polymerization time. (D) The change in the g factor as a function of the thickness of the polymer layer. Mag, magnet.CC BY-NC · PubMed Central
Fig. 3. Temperature-dependent MR studies. (A) Schematic representation of the four-probe MR measurement setup, with the bottom Ni-gold and top gold electrode. (B and C) MR curves for films obtained from l-polymer and d-polymer, respectively, as a function of a magnetic field between −1.0 and 1.0 T at different temperatures. (D) The dependence of MR on the thickness of the polymer layers synthesized when the north pole of the magnet substrate points up (l-polymer) or down (d-polymer). The measurements were performed at a constant current of 0.5 mA. (E) Normalized ΔMR values as a function of temperature, where ΔMR (%) = |MR (%)|−1.0T + |MR (%)|+1.0T.
Fig. 3. Temperature-dependent MR studies. (A) Schematic representation of the four-probe MR measurement setup, with the bottom Ni-gold and top gold electrode. (B and C) MR curves for films obtained from l-polymer and d-polymer, respectively, as a function of a magnetic field between −1.0 and 1.0 T at different temperatures. (D) The dependence of MR on the thickness of the polymer layers synthesized when the north pole of the magnet substrate points up (l-polymer) or down (d-polymer). The measurements were performed at a constant current of 0.5 mA. (E) Normalized ΔMR values as a function of temperature, where ΔMR (%) = |MR (%)|−1.0T + |MR (%)|+1.0T.CC BY-NC · PubMed Central
Fig. 4. Spin polarization measured with mc-AFM. (A) Schematic representation of the mc-AFM setup. (B and C) Average I-V curves recorded for polymers synthesized in magnet up (l-polymer) and down directions (d-polymer). The red and blue lines denote the average I-V curves with the magnet’s north pole pointing in the up and down directions, respectively. The sample’s thickness in all the measurements was 60 ± 3 nm. (D) The dependence of the spin polarization (the absolute value) on the thickness of the layers of polymers synthesized in the magnet up direction.
Fig. 4. Spin polarization measured with mc-AFM. (A) Schematic representation of the mc-AFM setup. (B and C) Average I-V curves recorded for polymers synthesized in magnet up (l-polymer) and down directions (d-polymer). The red and blue lines denote the average I-V curves with the magnet’s north pole pointing in the up and down directions, respectively. The sample’s thickness in all the measurements was 60 ± 3 nm. (D) The dependence of the spin polarization (the absolute value) on the thickness of the layers of polymers synthesized in the magnet up direction.CC BY-NC · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 38 references

Research works printed but not linked: 2

  1. R. E. Gawley J. Aube Principles of Asymmetric Synthesis: Volume 14 Tetrahedron Organic Chemistry (Elsevier Science & Technology 2004).
  2. 10.1021/ma980383 · doi:10.1021/ma980383

Cited by

See all 42

Metadata

Authors
Bhowmick, D. K., Das, T. K., Santra, K., Mondal, A. K., Tassinari, F., Schwarz, R., Diesendruck, C. E., & Naaman, R.
Affiliations
  • Weizmann Institute of Science (IL)
  • University of Modena and Reggio Emilia (IT)
  • Technion – Israel Institute of Technology (IL)
Corresponding author
Naaman, Ron
Venue
Science Advances
Published
2022-08-12
Volume
8
Issue
32
Pages
eabq2727-eabq2727
ISSN
2375-2548 (ISSN-L)
OpenAlex
W4291019814
Cited by
42
References
38
Citations by year
2026: 13 · 2025: 10 · 2024: 13 · 2023: 5 · 2022: 1
FWCI
2.76
Type
journal article
Language
en
Open access
Licence
cc-by-nc
Locations
  • Science Advances (publishedVersion, cc-by-nc)
  • PubMed Central (publishedVersion, cc-by-nc)
  • PubMed (publishedVersion)
  • IRIS UNIMORE (University of Modena and Reggio Emilia) (submittedVersion, cc-by-nc)
  • OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
Funders
U.S. Department of Energy (ER 46430, DEFG0207ER46430)
Topics
  • Physical Sciences › Chemistry › Organic Chemistry › Synthesis and Properties of Aromatic Compounds
  • Physical Sciences › Materials Science › Polymers and Plastics › Conducting polymers and applications
  • Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Surface Chemistry and Catalysis
Keywords
spin polarization, 2-vinylpyridine, stereogenic centers, isotactic polymers, spin filtering, circular dichroism, magnetoresistance, polymer film thickness, temperature dependence

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Spin-induced asymmetry reaction—The formation of asymmetric carbon by electropolymerization. https://app.cochat.ai/papers/10.1126/sciadv.abq2727
The paper
Bhowmick, D. K., Das, T. K., Santra, K., Mondal, A. K., Tassinari, F., Schwarz, R., Diesendruck, C. E., & Naaman, R. (2022). Spin-induced asymmetry reaction—The formation of asymmetric carbon by electropolymerization. Science Advances. https://doi.org/10.1126/sciadv.abq2727

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.