The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Polymer Nanotubes by Wetting of Ordered Porous Templates
Abstract
We have developed a simple technique for the fabrication of polymer nanotubes with a monodisperse size distribution and uniform orientation. When either a polymer melt or solution is placed on a substrate with high surface energy, it will spread to form a thin film, known as a precursor film, similar to the behavior of low molar mass liquids. Similar wetting phenomena occur if porous templates are brought into contact with polymer solutions or melts: A thin surface film will cover the pore walls in the initial stages of wetting. This is because the cohesive driving forces for complete filling are much weaker than the adhesive forces. Wall wetting and complete filling of the pores thus take place on different time scales. The latter is prevented by thermal quenching in the case of melts or by solvent evaporation in the case of solutions, thus preserving a nanotube structure. If the template is of monodisperse size distribution, aligned or ordered, so are the nanotubes, and ordered polymer nanotube arrays can be obtained if the template is removed. Any melt-processible polymer, such as polytetrafluoroethylene (PTFE), blends, or multicomponent solutions can be formed into nanotubes with a wall thickness of a few tens of nanometers. Owing to its versatility, this approach should be a promising route toward functionalized polymer nanotubes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
de Gennes, P. G. (1985) · Reviews of Modern Physics · doi:10.1103/revmodphys.57.827 · Cited by 7,207
Cited by
TiO2 Nanotubes: Synthesis and Applications
Roy, P., Berger, S., & Schmuki, P. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201001374 · Cited by 3,134
Graphenes as Potential Material for Electronics
Wu, J., Pisula, W., & Müllen, K. (2007) · Chemical Reviews · doi:10.1021/cr068010r · Cited by 2,723
Design and Preparation of Porous Polymers
Wu, D., Xu, F., Sun, B., Fu, R., He, H., & Matyjaszewski, K. (2012) · Chemical Reviews · doi:10.1021/cr200440z · Cited by 1,748
α‐Fe2O3 Nanotubes in Gas Sensor and Lithium‐Ion Battery Applications
Chen, J., Xu, L., Li, W., & Gou, X. (2005) · Advanced Materials · doi:10.1002/adma.200401101 · Cited by 1,605
Supramolecular Nanotube Architectures Based on Amphiphilic Molecules
Shimizu, T., Masuda, M., & Minamikawa, H. (2005) · Chemical Reviews · doi:10.1021/cr030072j · Cited by 1,463
Metadata
- Authors
- Steinhart, M., Wendorff, J. H., Greiner, A., Wehrspohn, R. B., Nielsch, K., Schilling, J., Choi, J., & Gösele, U.
- Venue
- Science
- Published
- 2002-06-14
- Volume
- 296
- Issue
- 5575
- Pages
- 1997-1997
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2079927857
- Cited by
- 846
- References
- 1
- FWCI
- 31.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.