The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface
Open accessAbstract
Large-scale, continuous 3D printing: Many three-dimensional (3D) printing methods build up structures layer by layer, which causes a lamination layer between each discrete step. Continuous printing can be done from a fluid bed if a so-called dead layer is used to buffer between the solidified structure and pool of resin. However, printing speeds are limited by the heat buildup from the exothermic polymerization process, thus limiting the ultimate size of the printed object. Walker et al. use a pumped, nonreactive fluorinated oil to act as the dead layer that removes heat during polymerization. This approach allows for both speedup and scale-up of the printing process. Science , this issue p. 360
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity
Wong, T.-S., Kang, S. H., Tang, S. K. Y., Smythe, E. J., Hatton, B. D., Grinthal, A., & Aizenberg, J. (2011) · Nature · doi:10.1038/nature10447 · Cited by 4,134
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
PIVlab – Towards User-friendly, Affordable and Accurate Digital Particle Image Velocimetry in MATLAB
Thielicke, W., & Stamhuis, E. J. (2014) · Journal of Open Research Software · doi:10.5334/jors.bl · Cited by 2,391
Ultralight, ultrastiff mechanical metamaterials
Zheng, X., Lee, H., Weisgraber, T. H., Shusteff, M., DeOtte, J., Duoss, E. B., Kuntz, J. D., Biener, M. M., Ge, Q., Jackson, J. A., et al. (2014) · Science · doi:10.1126/science.1252291 · Cited by 2,308
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Photoinitiated Polymerization: Advances, Challenges, and Opportunities
Yağcı, Y., Jockusch, S., & Turro, N. J. (2010) · Macromolecules · doi:10.1021/ma1007545 · Cited by 1,432
Cited by
Printed aerogels: chemistry, processing, and applications
Feng, J., Su, B.-L., Xia, H., Zhao, S., Gao, C., Wang, L., Ogbeide, O., Feng, J., & Hasan, T. (2021) · Chemical Society Reviews · doi:10.1039/c9cs00757a · Cited by 313
Rapid digital light 3D printing enabled by a soft and deformable hydrogel separation interface
Wu, J., Guo, J., Linghu, C., Lu, Y., Song, J., Xie, T., & Zhao, Q. (2021) · Nature Communications · doi:10.1038/s41467-021-26386-6 · Cited by 109
Metadata
- Authors
- Walker, D. A., Hedrick, J. L., & Mirkin, C. A.
- Venue
- Science
- Published
- 2019-10-18
- Volume
- 366
- Issue
- 6463
- Pages
- 360-364
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2980453861
- Cited by
- 459
- References
- 23
- FWCI
- 22.89
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface. https://app.cochat.ai/papers/10.1126/science.aax1562
- The paper
- Walker, D. A., Hedrick, J. L., & Mirkin, C. A. (2019). Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface. Science. https://doi.org/10.1126/science.aax1562
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
