The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Organometallic-functionalized interfaces for highly efficient inverted perovskite solar cells
Abstract
Further enhancing the performance and stability of inverted perovskite solar cells (PSCs) is crucial for their commercialization. We report that the functionalization of multication and halide perovskite interfaces with an organometallic compound, ferrocenyl-bis-thiophene-2-carboxylate (FcTc 2 ), simultaneously enhanced the efficiency and stability of inverted PSCs. The resultant devices achieved a power conversion efficiency of 25.0% and maintained >98% of their initial efficiency after continuously operating at the maximum power point for 1500 hours under simulated AM1.5 illumination. Moreover, the FcTc 2 -functionalized devices passed the international standards for mature photovoltaics (IEC61215:2016) and have exhibited high stability under the damp heat test (85°C and 85% relative humidity).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Ab initio molecular dynamics for liquid metals
Kresse, G., & Hafner, J. (1993) · Physical Review B · doi:10.1103/physrevb.47.558 · Cited by 45,727
Multiwfn: A multifunctional wavefunction analyzer
Lu, T., & Chen, F. (2012) · Journal of Computational Chemistry · doi:10.1002/jcc.22885 · Cited by 45,371
Efficient perovskite solar cells via improved carrier management
Yoo, J. J., Seo, G., Chua, M. R., Park, T. G., Lu, Y., Rotermund, F., Kim, Y.-K., Moon, C. S., Jeon, N. J., Correa-Baena, J.-P., et al. (2021) · Nature · doi:10.1038/s41586-021-03285-w · Cited by 2,934
Quantitative analysis of molecular surface based on improved Marching Tetrahedra algorithm
Lu, T., & Chen, F. (2012) · Journal of Molecular Graphics and Modelling · doi:10.1016/j.jmgm.2012.07.004 · Cited by 2,811
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Chen, W., Wu, Y., Yue, Y., Liu, J., Zhang, W., Yang, X., Chen, H., Bi, E., Ashraful, I., Grätzel, M., et al. (2015) · Science · doi:10.1126/science.aad1015 · Cited by 2,279
Promises and challenges of perovskite solar cells
Correa-Baena, J.-P., Saliba, M., Buonassisi, T., Grätzel, M., Abate, A., Tress, W., & Hagfeldt, A. (2017) · Science · doi:10.1126/science.aam6323 · Cited by 2,221
Zheng, X., Chen, B., Dai, J., Fang, Y., Bai, Y., Lin, Y., Wei, H., Zeng, X. C., & Huang, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.102 · Cited by 2,154
Challenges for commercializing perovskite solar cells
Rong, Y., Hu, Y., Mei, A., Tan, H., Saidaminov, M. I., Seok, S. I., McGehee, M. D., Sargent, E. H., & Han, H. (2018) · Science · doi:10.1126/science.aat8235 · Cited by 2,140
Enhanced photovoltage for inverted planar heterojunction perovskite solar cells
Luo, D., Yang, W., Wang, Z., Sadhanala, A., Hu, Q., Su, R., Shivanna, R., Trindade, G. F., Watts, J. F., Xu, Z., et al. (2018) · Science · doi:10.1126/science.aap9282 · Cited by 1,510
Planar perovskite solar cells with long-term stability using ionic liquid additives
Bai, S., Da, P., Li, C., Wang, Z., Yuan, Z., Fu, F., Kawecki, M., Liu, X., Sakai, N., Wang, J. T.-W., et al. (2019) · Nature · doi:10.1038/s41586-019-1357-2 · Cited by 1,458
Constructive molecular configurations for surface-defect passivation of perovskite photovoltaics
Wang, R., Xue, J., Wang, K.-L., Wang, Z.-K., Luo, Y., Fenning, D., Xu, G., Nuryyeva, S., Huang, T., Zhao, Y., et al. (2019) · Science · doi:10.1126/science.aay9698 · Cited by 1,339
Zheng, X., Hou, Y., Bao, C., Yin, J., Yuan, F., Huang, Z., Song, K., Liu, J., Troughton, J., Gasparini, N., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0538-4 · Cited by 1,236
Rau, U. (2007) · Physical Review B · doi:10.1103/physrevb.76.085303 · Cited by 1,231
Stabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts
Yang, S., Chen, S., Mosconi, E., Fang, Y., Xiao, X., Wang, C., Zhou, Y., Yu, Z., Zhao, J., Gao, Y., et al. (2019) · Science · doi:10.1126/science.aax3294 · Cited by 1,029
Stabilizing perovskite-substrate interfaces for high-performance perovskite modules
Chen, S., Dai, X., Xu, S., Jiao, H., Zhao, L., & Huang, J. (2021) · Science · doi:10.1126/science.abi6323 · Cited by 910
Constructing heterojunctions by surface sulfidation for efficient inverted perovskite solar cells
Li, X., Zhang, W., Guo, X., Lu, C., Wei, J., & Fang, J. (2022) · Science · doi:10.1126/science.abl5676 · Cited by 907
Wang, Q., Chen, B., Liu, Y., Deng, Y., Bai, Y., Dong, Q., & Huang, J. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02941h · Cited by 886
Addressing the stability issue of perovskite solar cells for commercial applications
Meng, L., You, J., & Yang, Y. (2018) · Nature Communications · doi:10.1038/s41467-018-07255-1 · Cited by 778
Wang, J., Zhang, J., Zhou, Y., Liu, H., Xue, Q., Li, X., Chueh, C.-C., Yip, H.-L., Zhu, Z., & Jen, A. K. Y. (2020) · Nature Communications · doi:10.1038/s41467-019-13909-5 · Cited by 662
Self-citationLi, F., Deng, X., Qi, F., Li, Z., Liu, D., Shen, D., Qin, M., Wu, S., Lin, F., Jang, S.-H., et al. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c09845 · Cited by 655
Self-citationWu, Y., Yang, X., Chen, W., Yue, Y., Cai, M., Xie, F., Bi, E., Islam, A., & Han, L. (2016) · Nature Energy · doi:10.1038/nenergy.2016.148 · Cited by 644
Towards commercialization: the operational stability of perovskite solar cells
Li, N., Niu, X., Chen, Q., & Zhou, H. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00573h · Cited by 633
Reducing Detrimental Defects for High‐Performance Metal Halide Perovskite Solar Cells
Ono, L. K., Liu, S. (., & Qi, Y. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201905521 · Cited by 541
Stable and low-photovoltage-loss perovskite solar cells by multifunctional passivation
Yang, G., Ren, Z., Liu, K., Qin, M., Deng, W., Zhang, H., Wang, H., Liang, J., Ye, F., Liang, Q., et al. (2021) · Nature Photonics · doi:10.1038/s41566-021-00829-4 · Cited by 417
Liquid medium annealing for fabricating durable perovskite solar cells with improved reproducibility
Li, N., Niu, X., Li, L., Wang, H., Huang, Z., Zhang, Y., Chen, Y., Zhang, X., Zhu, C., Zai, H., et al. (2021) · Science · doi:10.1126/science.abh3884 · Cited by 413
2D metal–organic framework for stable perovskite solar cells with minimized lead leakage
Wu, S., Li, Z., Li, M.-Q., Diao, Y., Lin, F., Liu, T., Zhang, J., Tieu, P., Gao, W., Qi, F., et al. (2020) · Nature Nanotechnology · doi:10.1038/s41565-020-0765-7 · Cited by 397
Self-citationWu, S., Zhang, J., Li, Z., Liu, D., Qin, M., Cheung, S. H., Lu, X., Lei, D., So, S. K., Zhu, Z., et al. (2020) · Joule · doi:10.1016/j.joule.2020.04.001 · Cited by 388
Self-citationStabilizing Perovskite Solar Cells to IEC61215:2016 Standards with over 9,000-h Operational Tracking
Mei, A., Sheng, Y., Ming, Y., Hu, Y., Rong, Y., Zhang, W., Luo, S., Na, G., Tian, C., Hou, X., et al. (2020) · Joule · doi:10.1016/j.joule.2020.09.010 · Cited by 386
Iodine reduction for reproducible and high-performance perovskite solar cells and modules
Chen, S., Xiao, X., Gu, H., & Huang, J. (2021) · Science Advances · doi:10.1126/sciadv.abe8130 · Cited by 312
Layer-by-Layer Degradation of Methylammonium Lead Tri-iodide Perovskite Microplates
Fan, Z., Xiao, H., Wang, Y., Zhao, Z., Lin, Z., Cheng, H.-C., Lee, S.-J., Wang, G., Feng, Z., Goddard, W. A., et al. (2017) · Joule · doi:10.1016/j.joule.2017.08.005 · Cited by 271
Guo, Y., Apergi, S., Li, N., Chen, M., Yin, C., Yuan, Z., Gao, F., Xie, F., Brocks, G., Tao, S., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-20970-6 · Cited by 198
Multi-cation perovskites prevent carrier reflection from grain surfaces
Saidaminov, M. I., Williams, K., Wei, M., Johnston, A., Quintero-Bermudez, R., Vafaie, M., Pina, J. M., Proppe, A. H., Hou, Y., Walters, G., et al. (2020) · Nature Materials · doi:10.1038/s41563-019-0602-2 · Cited by 162
Singh, A. N., Kajal, S., Kim, J., Jana, A., Kim, J. Y., & Kim, K. S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000768 · Cited by 117
Peak Force Infrared–Kelvin Probe Force Microscopy
Jakob, D. S., Wang, H., Zeng, G., Otzen, D. E., Yan, Y. S., & Xu, X. G. (2020) · Angewandte Chemie · doi:10.1002/ange.202004211 · Cited by 14
Cited by
Minimizing buried interfacial defects for efficient inverted perovskite solar cells
Zhang, S., Ye, F., Wang, X., Chen, R., Zhang, H., Zhan, L., Jiang, X., Li, Y., Ji, X., Liu, S., et al. (2023) · Science · doi:10.1126/science.adg3755 · Cited by 1,159
Self-citationSurface reaction for efficient and stable inverted perovskite solar cells
Jiang, Q., Tong, J., Xian, Y., Kerner, R. A., Dunfield, S. P., Xiao, C., Scheidt, R. A., Kuciauskas, D., Wang, X., Hautzinger, M. P., et al. (2022) · Nature · doi:10.1038/s41586-022-05268-x · Cited by 1,154
Stabilized hole-selective layer for high-performance inverted p-i-n perovskite solar cells
Li, Z., Sun, X., Zheng, X., Li, B., Gao, D., Zhang, S., Wu, X., Li, S., Gong, J., Luther, J. M., et al. (2023) · Science · doi:10.1126/science.ade9637 · Cited by 862
Self-citationBimolecularly passivated interface enables efficient and stable inverted perovskite solar cells
Liu, C., Yang, Y., Chen, H., Xu, J., Liu, A., Bati, A. S. R., Zhu, H., Grater, L., Hadke, S. S., Huang, C., et al. (2023) · Science · doi:10.1126/science.adk1633 · Cited by 757
Long-term operating stability in perovskite photovoltaics
Zhu, H., Teale, S., Lintangpradipto, M. N., Mahesh, S., Chen, B., McGehee, M. D., Sargent, E. H., & Bakr, O. M. (2023) · Nature Reviews Materials · doi:10.1038/s41578-023-00582-w · Cited by 739
Metadata
- Authors
- Li, Z., Li, B., Wu, X., Sheppard, S. A., Zhang, S., Gao, D., Long, N. J., & Zhu, Z.
- Venue
- Science
- Published
- 2022-04-22
- Volume
- 376
- Issue
- 6591
- Pages
- 416-420
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W4224247759
- Cited by
- 1,043
- References
- 35
- FWCI
- 61.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.