The DOI matches its Crossref record.
Compressibility effect in evaluating the pore-size distribution of kaolin clay using mercury intrusion porosimetry
Abstract
The objective of the present research is to quantitatively evaluate the compression that can occur during the evaluation of pore-size distribution of cohesive soil using mercury intrusion porosimetry (MIP). A new experimental procedure was developed that can be routinely used to evaluate the corrections associated with the compressibility for porous solid samples using MIP. The approach used in this study involves performing mercury intrusion tests on dehydrated kaolin samples using freeze-dried and oven-dried techniques, and on identical samples confined by low-porosity latex membranes. Corrections for latex intrusion and issues related to dehydration of samples are addressed. The measured contact angle of mercury with kaolin clay using the sessile drop technique was used in the data reduction. Repeatable test results were obtained throughout the testing program. The procedure for obtaining volume-change behavior under isotropic conditions for a large range of pressures using the mercury porosimeter is also presented for oven-dried samples. Scanning electron micrographs for intruded and compressed specimens are presented along with a discussion on the observed hysteresis in MIP test data. The test results for kaolin samples show substantive initial compression before the occurrence of actual intrusion. This resulted in errors associated with the interpretation of pore sizes with diameters in the range of 0.4-200 µm.Key words: mercury intrusion, clay, compression, correction, pore-size distribution, high pressure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Romero, E., & Simms, P. H. (2008) · Geotechnical and Geological Engineering · doi:10.1007/s10706-008-9204-5 · Cited by 514
Du, Y.-J., Jiang, N.-J., Liu, S.-Y., Jin, F., Singh, D. N., & Puppala, A. J. (2014) · Canadian Geotechnical Journal · doi:10.1139/cgj-2013-0177 · Cited by 365
Structural characterization of natural loess and remolded loess under triaxial tests
Jiang, M., Zhang, F., Hu, H., Cui, Y., & Peng, J. (2014) · Engineering Geology · doi:10.1016/j.enggeo.2014.07.021 · Cited by 302
Characterization of dual-structure pore-size distribution of soil
Li, X., & Zhang, L. M. (2009) · Canadian Geotechnical Journal · doi:10.1139/t08-110 · Cited by 282
Jiang, N.-J., Du, Y.-J., Liu, S.-Y., Wei, M.-L., Horpibulsuk, S., & Arulrajah, A. (2016) · Canadian Geotechnical Journal · doi:10.1139/cgj-2015-0245 · Cited by 198
Metadata
- Authors
- Penumadu, D., & Dean, J.
- Venue
- Canadian Geotechnical Journal
- Publisher
- Canadian Science Publishing
- Published
- 2000
- Volume
- 37
- Issue
- 2
- Pages
- 393-405
- ISSN
- 0008-3674 (ISSN-L)
- 1208-6010
- OpenAlex
- W2082580515
- Cited by
- 205
- References
- 0
- FWCI
- 7.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Compressibility effect in evaluating the pore-size distribution of kaolin clay using mercury intrusion porosimetry. https://app.cochat.ai/papers/10.1139/cgj-37-2-393
- The paper
- Penumadu, D., & Dean, J. (2000). Compressibility effect in evaluating the pore-size distribution of kaolin clay using mercury intrusion porosimetry. Canadian Geotechnical Journal. https://doi.org/10.1139/cgj-37-2-393
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.