Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 1,019

The DOI matches its Crossref record.

Reinforced concrete: mechanics and design

Dilger, Walter H.·2000·Canadian Journal of Civil Engineering

Abstract

Dilger 1316 The authors succinctly state in the preface: “This book is a comprehensive university text on reinforced concrete design based on Canadian codes and standards. It is a complete revision of the senior author’s very successful American text. This Canadian edition is compatible with the National Building Code of Canada (NBCC), CSA Standard A23.3-94, and Canadian metric bar sizes. Each subject progresses from theory (based on mechanics) to a discussion of the behaviour of concrete elements, to the derivation of the design method, to practical design requirements, to completely worked-out examples. The level of presentation varies by topic, to accommodate the student learning the subject matter. Those topics normally covered in the first undergraduate course on reinforced concrete are presented at an introductory level. Those topics that would form a part of a second undergraduate course or a graduate level course are presented at a more advanced level. Always, however, the aim is to give the user the essential understanding needed to carry out design of reinforced concrete.” This well-formulated introduction describes the book in a concise way. This is the book university professors and their students have been waiting for. It reflects the senior author’s vast background and experience in the development of major codes, his over 30 years of experience as a teacher, and his prominence as one of North America’s leading researchers. It also shows his extensive experience as a design engineer. The book is very well organized. It starts, logically, with general information, which serves as background for the entire book. Reinforced concrete is defined in Chapter 1, which is followed by a discussion of the structural design process in Chapter 2. In this chapter, the main design criteria (structural adequacy, economy, maintainability, and esthetics), the different limit states, and safety concepts are presented in great detail. The next chapter deals with materials. For the prediction of the time-dependent creep and shrinkage properties, the models of the 1990 CEB–FIP code are presented, rather than the outdated ACI model. This chapter also contains a section that provides valuable guidance for the evaluation of the inplace concrete strength and safety of existing structures. The following six chapters present the basic concepts of the design of individual concrete members for flexure, shear, bond, and serviceability. Chapter 6 on shear is particularly interesting in that it discusses not only the historical and general background of the simplified and general methods for shear design of the CSA code, but also the easy to understand “plastic space truss model” used in several European codes. The basic design concepts are applied to continuous beams and slabs in Chapter 10. Examples of a real case study are used for illustration. Chapters 11 and 12 explain the behaviour of short and long columns. The ground-breaking research of Professor MacGregor is explained in great detail in the chapter on slender columns. The column chapters are followed by a comprehensive discussion of two-way slabs in three chapters. First moment fields for different slab configurations are presented, followed by discussions of the direct design method and the elastic frame methods. In Chapter 15, slab design is based on results of other methods of analysis such as finite elements, yield line theory or strip method. These three chapters are followed by chapters on footing design and design by shear friction. Chapter 18 presents a comprehensive discussion of strutand-tie models for the design of discontinuous regions in corbels, deep beams, walls, and joints. The design of walls is discussed in Chapter 19. The final chapter deals with earthquake design according to NBCC and A23.3. Four examples illustrate the seismic design. In the Appendix, design charts for common concrete strengths are given. Up-to-date references from around the world are listed chapter by chapter containing all the key papers on the many topics. The book is very well written and amply illustrated. Each chapter contains many design examples and a set of problems as well as a brief summary at the end. An Instructors Solution Manual, which is available to instructors, provides complete solutions to about 75% of the problems. This is not only an excellent book for civil engineering students but also a complete reference book for structural designers who may have forgotten some of the intricacies of modern structural concrete design.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1139/cjce-27-6-1316

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 1,019

Metadata

Authors
Dilger, W. H.
Venue
Canadian Journal of Civil Engineering
Published
2000
Volume
27
Issue
6
Pages
1316
ISSN
  • 0315-1468 (ISSN-L)
  • 1208-6029
OpenAlex
W2040319066
Cited by
1,019
References
0
FWCI
37.18
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Reinforced concrete: mechanics and design. https://app.cochat.ai/papers/10.1139/cjce-27-6-1316
The paper
Dilger, W. H. (2000). Reinforced concrete: mechanics and design. Canadian Journal of Civil Engineering. https://doi.org/10.1139/cjce-27-6-1316

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.