The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
The 2001 R.M. Hardy Lecture: The limits of limit equilibrium analyses
Abstract
Limit equilibrium types of analysis have been in use in geotechnical engineering for a long time and are now used routinely in geotechnical engineering practice. Modern graphical software tools have made it possible to gain a much better understanding of the inner numerical details of the method. A closer look at the details reveals that the limit equilibrium method of slices has some serious limitations. The fundamental shortcoming of limit equilibrium methods, which only satisfy equations of statics, is that they do not consider strain and displacement compatibility. This limitation can be overcome by using finite element computed stresses inside a conventional limit equilibrium framework. From the finite element stresses both the total shear resistance and the total mobilized shear stress on a slip surface can be computed and used to determine the factor of safety. Software tools that make this feasible and practical are now available, and they hold great promise for advancing the technology of analyzing the stability of earth structures.Key words: limit equilibrium, stability, factor of safety, finite element, ground stresses, slip surface.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A discrete numerical model for granular assemblies
Cundall, P. A., & Strack, O. D. L. (1979) · Géotechnique · doi:10.1680/geot.1979.29.1.47 · Cited by 17,527
Cited by
Landslide hydrology: from hydrology to pore pressure
Bogaard, T. A., & Greco, R. (2016) · WIREs Water · doi:10.1002/wat2.1126 · Cited by 393
Metadata
- Authors
- Krahn, J.
- Venue
- Canadian Geotechnical Journal
- Publisher
- Canadian Science Publishing
- Published
- 2003-06-01
- Volume
- 40
- Issue
- 3
- Pages
- 643-660
- ISSN
- 0008-3674 (ISSN-L)
- 1208-6010
- OpenAlex
- W1989235997
- Cited by
- 223
- References
- 1
- FWCI
- 9.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.