The DOI matches its Crossref record.
MOLECULAR SIEVE SORBENTS FROM CLINOPTILOLITE
Abstract
Clinoptilolite has been investigated as a source of porous, largely crystalline, molecular sieve sorbents. By treating the zeolite with mineral acid of different strengths a range of high area sorbents has been produced, in which all the original cations have been replaced by hydronium ions, and in which the aluminum has been progressively removed from the frameworks. The new sorbents and the original clinoptilolite have been characterized by sorption studies, and by X-ray, electron optical, differential thermal analysis, and thermogravimetric methods. The most open molecular sieve sorbents, able to imbibe considerable amounts of larger molecules such as benzene and isopentane, were obtained using 1 N and 2 N acid, but as acid strength increased further there was a decline in both crystallinity and sorption capacity until with 30 N acid an amorphous product resulted.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Porous Materials for Oil Spill Cleanup: A Review of Synthesis and Absorbing Properties
Adebajo, M. O., Frost, R. L., Kloprogge, J. T., Carmody, O., & Kokot, S. (2003) · Journal of Porous Materials · doi:10.1023/a:1027484117065 · Cited by 1,045
Hierarchically Structured Zeolites: From Design to Application
Chen, L.-H., Sun, M.-H., Wang, Z., Yang, W., Xie, Z., & Su, B.-L. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00016 · Cited by 724
Overview and Industrial Assessment of Synthesis Strategies towards Zeolites with Mesopores
Chal, R., Gérardin, C., Bulut, M., & van Donk, S. (2011) · ChemCatChem · doi:10.1002/cctc.201000158 · Cited by 499
Tailored crystalline microporous materials by post-synthesis modification
Valtchev, V., Majano, G., Mintova, S., & Pérez-Ramírez, J. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35196j · Cited by 478
Ogura, M., Shinomiya, S.-Y., Tateno, J., Nara, Y., Nomura, M., Kikuchi, E., & Matsukata, M. (2001) · Applied Catalysis A: General · doi:10.1016/s0926-860x(01)00645-7 · Cited by 468
Hierarchical zeolites: Synthesis and catalytic properties
Feliczak-Guzik, A. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.09.030 · Cited by 374
Challenges on molecular aspects of dealumination and desilication of zeolites
Silaghi, M.-C., Chizallet, C., & Raybaud, P. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.02.040 · Cited by 325
Clinoptilolite: Untapped potential for kinetics gas separations
Ackley, M. W., Giese, R. F., & Yang, R. T. (1992) · Zeolites · doi:10.1016/0144-2449(92)90050-y · Cited by 127
Kühl, G. H. (1999) · Catalysis and Zeolites · doi:10.1007/978-3-662-03764-5_3 · Cited by 52
Chapter 6 Secondary synthesis methods
(2001) · Studies in Surface Science and Catalysis · doi:10.1016/s0167-2991(01)80248-2 · Cited by 52
Jamalzadeh, S., Haghighi, M., & Asgari, N. (2014) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2013.11.001 · Cited by 29
APPLICATIONS OF NATURAL ZEOLITES IN POLLUTION ABATEMENT AND INDUSTRY
Roque-Malherbe, R. (2001) · Handbook of Surfaces and Interfaces of Materials · doi:10.1016/b978-012513910-6/50069-4 · Cited by 21
Metadata
- Authors
- Barrer, R. M., & Makki, M. B.
- Venue
- Canadian Journal of Chemistry
- Publisher
- Canadian Science Publishing
- Published
- 1964-06-01
- Volume
- 42
- Issue
- 6
- Pages
- 1481-1487
- ISSN
- 0008-4042 (ISSN-L)
- 1480-3291
- OpenAlex
- W2088066309
- Cited by
- 202
- References
- 0
- FWCI
- 3.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.