Modeling of Piezoelectric Energy Harvesting Using Cymbal Transducers
Open accessThe DOI matches its Crossref record.
Abstract
This study reports the experimental and analytical results on a piezoelectric cymbal with 29 mm diameter and 1 mm thickness operating under force of 70 N in the frequency range of 10–200 Hz. It was found that the generated power increases with the frequency and around 100 mW can be harvested at frequency of 200 Hz across a 200 kΩ resistor. Power generation from the cymbal transducer was modeled by using the theory developed for the Belleville spring. The calculated results were found to be in good agreement with the experimental results. The results indicate that the metal–ceramic composite transducer “CYMBAL” is the most promising structure for harvesting the electric energy from automobile engine vibrations. The metal cap enhances the endurance of the ceramic to sustain high loads along with stress amplification.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Mechanical modulations for enhancing energy harvesting: Principles, methods and applications
Zou, H.-X., Zhao, L.-C., Gao, Q.-H., Zuo, L., Liu, F.-R., Tan, T., Wei, K.-X., & Zhang, W.-M. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113871 · Cited by 377
Energy Harvesting Research: The Road from Single Source to Multisource
Bai, Y., Jantunen, H., & Juuti, J. (2018) · Advanced Materials · doi:10.1002/adma.201707271 · Cited by 295
Designing and manufacturing a piezoelectric tile for harvesting energy from footsteps
Hwang, S. J., Jung, H. J., Kim, J. H., Ahn, J. H., Song, D., Song, Y., Lee, H. L., Moon, S. P., Park, H., & Sung, T. H. (2015) · Current Applied Physics · doi:10.1016/j.cap.2015.02.009 · Cited by 92
Floor Tile Energy Harvester for Self-Powered Wireless Occupancy Sensing
Sharpes, N., Vučković, D., & Priya, S. (2016) · Energy Harvesting and Systems · doi:10.1515/ehs-2014-0009 · Cited by 50
Self-citationAnalysis of the energy extracted by a harvester based on a piezoelectric tile
Cascetta, F., Lo Schiavo, A., Minardo, A., Musto, M., Rotondo, G., & Calcagni, A. (2018) · Current Applied Physics · doi:10.1016/j.cap.2018.04.015 · Cited by 20
Metadata
- Authors
- Kim, H., Priya, S., & Uchino, K.
- Venue
- Japanese Journal of Applied Physics
- Publisher
- IOP Publishing
- Published
- 2006-07-01
- Volume
- 45
- Issue
- 7R
- Pages
- 5836
- ISSN
- 0021-4922 (ISSN-L)
- 1347-4065
- OpenAlex
- W2040990882
- Cited by
- 105
- References
- 0
- FWCI
- 10.34
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Modeling of Piezoelectric Energy Harvesting Using Cymbal Transducers. https://app.cochat.ai/papers/10.1143/jjap.45.5836
- The paper
- Kim, H., Priya, S., & Uchino, K. (2006). Modeling of Piezoelectric Energy Harvesting Using Cymbal Transducers. Japanese Journal of Applied Physics. https://doi.org/10.1143/jjap.45.5836
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.