The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Preparation of [110] Grain Oriented Barium Titanate Ceramics by Templated Grain Growth Method and Their Piezoelectric Properties
Open accessAbstract
[110]-oriented barium titanate (BaTiO 3 ) ceramics were prepared by templated grain growth (TGG) method using [110]-oriented BaTiO 3 platelike particles as a template and hydrothermal BaTiO 3 sphere particles with different particle sizes as a matrix. The degree of orientation along the [110] direction, F 110 , was measured using an X-ray diffraction (XRD) pattern by the Lotgering method. To obtain both a high density and a high F 110 , the preparation conditions were optimized as functions of matrix particle size, volume fraction of the template to the matrix, and sintering temperature. As for the results, BaTiO 3 -grain-oriented ceramics with a high density of more than 96% were successfully prepared despite various F 110 values from 0 to 98%. Scanning electron microscopy (SEM) revealed that their average grain sizes were always approximately 75 µm despite various F 110 values and there were no anisotropic microstructures. These grain-oriented BaTiO 3 ceramics were poled at 100 °C, and their piezoelectric properties were measured using a resonance–antiresonance method and a piezo d 33 meter for d 31 and d 33 piezoelectric constants. As for the results, the d 31 values were almost constant at -50 pC/N despite various F 110 values, while the d 33 values increased with increasing F 110 values, and at around an F 110 of 85%, d 33 reached a maximum of 788 pC/N.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ultrahigh strain and piezoelectric behavior in relaxor based ferroelectric single crystals
Park, S.-E., & Shrout, T. R. (1997) · Journal of Applied Physics · doi:10.1063/1.365983 · Cited by 4,157
Cited by
BaTiO3-Based Piezoelectrics: Fundamentals, Current Status, and Perspectives
Acosta, M., Novak, N., Rojas, V., Patel, S., Vaish, R., Koruza, J., Rossetti, G. A., & Rödel, J. (2017) · Applied Physics Reviews · doi:10.1063/1.4990046 · Cited by 1,451
Recent development in lead-free perovskite piezoelectric bulk materials
Zheng, T., Wu, J., Xiao, D., & Zhu, J. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.06.002 · Cited by 1,078
Unfolding grain size effects in barium titanate ferroelectric ceramics
Tan, Y., Zhang, J., Wu, Y., Wang, C., Koval, V., Shi, B., Ye, H., McKinnon, R., Viola, G., & Yan, H. (2015) · Scientific Reports · doi:10.1038/srep09953 · Cited by 379
Grain-size effects on dielectric and piezoelectric properties of poled BaTiO3 ceramics
Zheng, P., Zhang, J. L., Tan, Y. Q., & Wang, C. L. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.06.015 · Cited by 378
WHAT CAN BE EXPECTED FROM LEAD-FREE PIEZOELECTRIC MATERIALS?
DAMJANOVIC, D., KLEIN, N., LI, J., & POROKHONSKYY, V. (2010) · Functional Materials Letters · doi:10.1142/s1793604710000919 · Cited by 349
Recent Progress on BaTiO3-Based Piezoelectric Ceramics for Actuator Applications
Gao, J., Xue, D., Liu, W., Zhou, C., & Ren, X. (2017) · Actuators · doi:10.3390/act6030024 · Cited by 310
Metadata
- Authors
- Wada, S., Takeda, K., Muraishi, T., Kakemoto, H., Tsurumi, T., & Kimura, T.
- Venue
- Japanese Journal of Applied Physics
- Publisher
- IOP Publishing
- Published
- 2007-10-01
- Volume
- 46
- Issue
- 10S
- Pages
- 7039
- ISSN
- 0021-4922 (ISSN-L)
- 1347-4065
- OpenAlex
- W1989199826
- Cited by
- 199
- References
- 1
- FWCI
- 6.22
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.