From outcrop to 3D modelling: a case study of a dolomitized carbonate reservoir, Zagros Mountains, Iran
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Outcrop data derived from fieldwork, remote sensing satellite and LiDAR-derived 3D models were used to build an integrated dual porosity-permeability static reservoir model which captured stratigraphic, diagenetic and structural heterogeneities. The study focuses upon the Mishrif-Mauddud/Sarvak interval, one of the most prolific reservoir units in the Middle East. The study area is exceptionally well exposed in deep gorges which cut transversally across anticlines of the Simply Folded Belt of the Zagros Mountains. The outcrops reveal volumetrically significant dolomitization of the latest Albian to Turonian carbonates of the Lower and Upper Sarvak formations. Three different dolomite bodies, which are spatially connected and genetically linked to the same fluid flow event, were recognized and mapped: (1) a thick dolomite body replacing the Lower Sarvak and forming a massive dolomite core; (2) horizontally extensive stratabound dolomite bodies (sheets), emanating laterally from the massive dolomite; and (3) vertically elongated dolomite pipes, rooted in the massive dolomite and typically replacing slope facies of the Upper Sarvak Formation. The widespread development of tight, non-planar dolomite textures (a typical feature of high temperature dolomitization) drastically reduces the reservoir potential of the dolomitized geobody in the study area. In particular, this is present in the massive dolomitized body. Vuggy porosity seems to increase porosity only locally and to a limited extent, developing a non-connected pore network. The dominant porous dolomite textures are more abundant in the peripheral part of the geobody (dolomite sheets), where they are strongly controlled by precursor facies and diagenesis. Three main dolomite pore types were identified (intercrystalline, interparticle and mouldic), linked to the depositional environment of the precursor limestone. These pore types were used for petrophysical modelling. The approach adopted in this study allowed the distribution of rock properties in the dolomitized geobody to mimic the main depositional facies architecture. The study area is characterized by a simple fracture network. Two main fracture sets and two major sets of conjugate normal faults were recognized in the field and mapped on 3D virtual outcrop data. Non-stratabound fracture density varied according to stratigraphic unit and/or dolomite body type (pipes/massive/sheets), showing a general increase from precursor limestone to dolomite. Fracture density also varied according to distance from faults (fault damage zone). This was particularly true in the limestone. The data also showed a prominent increase in fracture height from limestone to dolomite bodies, indicating that the dolomitized geobodies are likely sites for high production and early water breakthrough.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Concepts and models of dolomitization: a critical reappraisal
Machel, H. G. (2004) · Geological Society, London, Special Publications · doi:10.1144/gsl.sp.2004.235.01.02 · Cited by 831 · cited 3×
“Geochemical and petrographic data support the hypothesis that many massive dolomite bodies formed in the subsurface (Morrow 1999) either as replacement of a calcium carbonate or as recrystallization of a precursor near-surface dolomite, or both (Whitaker et al. 2004; Machel 2004).”
BackgroundBoni, M., Parente, G., Bechstädt, T., De Vivo, B., & Iannace, A. (2000) · Sedimentary Geology · doi:10.1016/s0037-0738(99)00131-1 · Cited by 94
Cited by
Vandeginste, V., John, C. M., van de Flierdt, T., & Cosgrove, J. W. (2013) · AAPG Bulletin · doi:10.1306/11011212076 · Cited by 32
Beckert, J., Vandeginste, V., & John, C. M. (2015) · Marine and Petroleum Geology · doi:10.1016/j.marpetgeo.2015.08.038 · Cited by 27
Vandeginste, V., John, C. M., Cosgrove, J. W., & Manning, C. (2014) · AAPG Bulletin · doi:10.1306/05121413127 · Cited by 22
“Several studies document heterogeneity within fracturerelated geobodies with respect to porosity, permeability, and textures (Wilson et al., 2007; Shah et al., 2010; Sharp et al., 2010; Lapponi et al., 2011; Dewit et al., 2012).”
Background
Metadata
- Authors
- Lapponi, F., Casini, G., Sharp, I., Blendinger, W., Fernández, N., Romaire, I., & Hunt, D.
- Venue
- Petroleum Geoscience
- Publisher
- Geological Society of London
- Published
- 2011-08
- Volume
- 17
- Issue
- 3
- Pages
- 283-307
- ISSN
- 1354-0793 (ISSN-L)
- 2041-496X
- OpenAlex
- W2117102111
- Cited by
- 67
- References
- 2
- FWCI
- 6.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: From outcrop to 3D modelling: a case study of a dolomitized carbonate reservoir, Zagros Mountains, Iran. https://app.cochat.ai/papers/10.1144/1354-079310-040
- The paper
- Lapponi, F., Casini, G., Sharp, I., Blendinger, W., Fernández, N., Romaire, I., & Hunt, D. (2011). From outcrop to 3D modelling: a case study of a dolomitized carbonate reservoir, Zagros Mountains, Iran. Petroleum Geoscience. https://doi.org/10.1144/1354-079310-040
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.