The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Factors controlling joint spacing in interbedded sedimentary rocks: integrating numerical models with field observations from the Monterey Formation, USA
Abstract
Abstract Local tensile stress normal to a joint is reduced in the vicinity of the joint because such stresses are not transmitted across free surfaces. This stress reduction prevents the formation of new joints in the vicinity of existing joints, and thus influences joint spacing. Lateral extent of this stress reduction shadow increases with joint height, which corresponds to bed thickness for many sedimentary rocks. The linear correlation between joint spacing and bed thickness commonly observed in outcrop is a direct result of this relationship. However, other factors in addition to bed thickness influence joint spacing. We evaluate these factors through both a review of the Hobbs model for joint spacing and a 2D finite element simulation of a crack confined to a lithology-controlled mechanical unit. The stress reduction shadow increases in length with incresaing Young’s modulus of the jointing bed, though fracture stress, flaw size, flaw distribution and extensional strain all interact with bed thickness and elastic properties ultimately to control joint spacing. One explanation for the observed decrease in joint spacing with increasing Young’s modulus in outcrops of the Monterey Formation is that beds with higher Young’s moduli fail at lower magnitudes of extensional strain.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
VI. The phenomena of rupture and flow in solids
Griffith, A. A. (1921) · Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character · doi:10.1098/rsta.1921.0006 · Cited by 11,052
Cited by
Fractures, faults, and hydrocarbon entrapment, migration and flow
Aydin, A. (2000) · Marine and Petroleum Geology · doi:10.1016/s0264-8172(00)00020-9 · Cited by 660
Mechanical and fracture stratigraphy
Laubach, S. E., Olson, J. E., & Gross, M. R. (2009) · AAPG Bulletin · doi:10.1306/07270909094 · Cited by 495
Self-citationOlson, J. E. (2004) · Geological Society, London, Special Publications · doi:10.1144/gsl.sp.2004.231.01.05 · Cited by 352
Metadata
- Authors
- Gross, M. R., Fischer, M. P., Engelder, T., & Greenfield, R. J.
- Venue
- Geological Society, London, Special Publications
- Publisher
- Geological Society of London
- Published
- 1995-01-01
- Volume
- 92
- Issue
- 1
- Pages
- 215-233
- ISSN
- 0305-8719 (ISSN-L)
- OpenAlex
- W2083824245
- Cited by
- 189
- References
- 1
- FWCI
- 8.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.