The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Build-to-last: strength to weight 3D printed objects
Open accessAbstract
The emergence of low-cost 3D printers steers the investigation of new geometric problems that control the quality of the fabricated object. In this paper, we present a method to reduce the material cost and weight of a given object while providing a durable printed model that is resistant to impact and external forces. We introduce a hollowing optimization algorithm based on the concept of honeycomb-cells structure. Honeycombs structures are known to be of minimal material cost while providing strength in tension. We utilize the Voronoi diagram to compute irregular honeycomb-like volume tessellations which define the inner structure. We formulate our problem as a strength--to--weight optimization and cast it as mutually finding an optimal interior tessellation and its maximal hollowing subject to relieve the interior stress. Thus, our system allows to build-to-last 3D printed objects with large control over their strength-to-weight ratio and easily model various interior structures. We demonstrate our method on a collection of 3D objects from different categories. Furthermore, we evaluate our method by printing our hollowed models and measure their stress and weights.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Least squares quantization in PCM
Lloyd, S. (1982) · IEEE Transactions on Information Theory · doi:10.1109/tit.1982.1056489 · Cited by 15,836
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
Voronoi, G. (1908) · Journal für die reine und angewandte Mathematik (Crelles Journal) · doi:10.1515/crll.1908.134.198 · Cited by 2,248
Centroidal Voronoi Tessellations: Applications and Algorithms
Du, Q., Faber, V., & Gunzburger, M. (1999) · SIAM Review · doi:10.1137/s0036144599352836 · Cited by 2,244
Numerical Geometry of Non-Rigid Shapes
Bronstein, A. M., Bronstein, M. M., & Kimmel, R. (2009) · Monographs in Computer Science · doi:10.1007/978-0-387-73301-2 · Cited by 734
Structural shape optimization—A survey
Haftka, R. T., & Grandhi, R. V. (1986) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(86)90072-1 · Cited by 592
Make it stand: balancing shapes for 3D fabrication
Prévost, R., Whiting, E., Lefebvre, S., & Sorkine-Hornung, O. (2013) · ACM Transactions on Graphics · doi:10.1145/2461912.2461957 · Cited by 289
Design and fabrication of materials with desired deformation behavior
Bickel, B., Bächer, M., Otaduy, M. A., Lee, H. R., Pfister, H., Gross, M., & Matusik, W. (2010) · ACM Transactions on Graphics · doi:10.1145/1778765.1778800 · Cited by 259
Cost-effective printing of 3D objects with skin-frame structures
Wang, W., Wang, T. Y., Yang, Z., et al. (2013) · ACM Transactions on Graphics · doi:10.1145/2508363.2508382 · Cited by 252
3D-printing of non-assembly, articulated models
Calì, J., Calian, D. A., Amati, C., Kleinberger, R., Steed, A., Kautz, J., & Weyrich, T. (2012) · ACM Transactions on Graphics · doi:10.1145/2366145.2366149 · Cited by 227
Cited by
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Current and future trends in topology optimization for additive manufacturing
Liu, J., Gaynor, A. T., Chen, S., Kang, Z., Suresh, K., Takezawa, A., Li, L., Kato, J., Tang, J., Wang, C. C. L., et al. (2018) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-018-1994-3 · Cited by 870
Design and Optimization of Lattice Structures: A Review
Pan, C., Han, Y., & Lu, J. (2020) · Applied Sciences · doi:10.3390/app10186374 · Cited by 640
Support Structures for Additive Manufacturing: A Review
Jiang, J., Xu, X., & Stringer, J. (2018) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp2040064 · Cited by 527
Metadata
- Authors
- Lu, L., Sharf, A., Zhao, H., Wei, Y., Fan, Q., Chen, X., Savoye, Y., Tu, C., Cohen-Or, D., & Chen, B.
- Venue
- ACM Transactions on Graphics
- Published
- 2014-07-27
- Volume
- 33
- Issue
- 4
- Pages
- 1-10
- ISSN
- 0730-0301 (ISSN-L)
- 1557-7368
- OpenAlex
- W2046095156
- Cited by
- 290
- References
- 24
- FWCI
- 32.12
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Build-to-last: strength to weight 3D printed objects. https://app.cochat.ai/papers/10.1145/2601097.2601168
- The paper
- Lu, L., Sharf, A., Zhao, H., Wei, Y., Fan, Q., Chen, X., Savoye, Y., Tu, C., Cohen-Or, D., & Chen, B. (2014). Build-to-last: strength to weight 3D printed objects. ACM Transactions on Graphics. https://doi.org/10.1145/2601097.2601168
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.