The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Microstructures to control elasticity in 3D printing
Open accessAbstract
We propose a method for fabricating deformable objects with spatially varying elasticity using 3D printing. Using a single, relatively stiff printer material, our method designs an assembly of small-scale microstructures that have the effect of a softer material at the object scale, with properties depending on the microstructure used in each part of the object. We build on work in the area of metamaterials, using numerical optimization to design tiled microstructures with desired properties, but with the key difference that our method designs families of related structures that can be interpolated to smoothly vary the material properties over a wide range. To create an object with spatially varying elastic properties, we tile the object's interior with microstructures drawn from these families, generating a different microstructure for each cell using an efficient algorithm to select compatible structures for neighboring cells. We show results computed for both 2D and 3D objects, validating several 2D and 3D printed structures using standard material tests as well as demonstrating various example applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Limited Memory Algorithm for Bound Constrained Optimization
Byrd, R. H., Lu, P., Nocedal, J., & Zhu, C. (1995) · SIAM Journal on Scientific Computing · doi:10.1137/0916069 · Cited by 6,221
A variational approach to the theory of the elastic behaviour of multiphase materials
Hashin, Z., & Shtrikman, S. (1963) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(63)90060-7 · Cited by 5,882
Foam Structures with a Negative Poisson's Ratio
Lakes, R. (1987) · Science · doi:10.1126/science.235.4792.1038 · Cited by 3,866
Sigmund, O., & Petersson, J. (1998) · Structural Optimization · doi:10.1007/bf01214002 · Cited by 2,118
An Introduction to Homogenization
Cioranescu, D., & Donato, P. (1999) · doi:10.1093/oso/9780198565543.001.0001 · Cited by 1,309
3D Soft Metamaterials with Negative Poisson's Ratio
Babaee, S., Shim, J., Weaver, J. C., Chen, E. R., Patel, N., & Bertoldi, K. (2013) · Advanced Materials · doi:10.1002/adma.201301986 · Cited by 856
Physically Based Deformable Models in Computer Graphics
Nealen, A., Müller, M., Keiser, R., Boxerman, E., & Carlson, M. (2006) · Computer Graphics Forum · doi:10.1111/j.1467-8659.2006.01000.x · Cited by 759
Micro‐/Nanostructured Mechanical Metamaterials
Lee, J., Singer, J. P., & Thomas, E. L. (2012) · Advanced Materials · doi:10.1002/adma.201201644 · Cited by 559
Hierarchical optimization of material and structure
Rodrigues, H. C., Guedes, J. M., & Bendsøe, M. P. (2002) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-002-0209-z · Cited by 488
Automatic Design and Manufacture of Soft Robots
Hiller, J., & Lipson, H. (2012) · IEEE Transactions on Robotics · doi:10.1109/tro.2011.2172702 · Cited by 311
Sifakis, E., & Barbic, J. (2012) · ACM SIGGRAPH 2012 Courses · doi:10.1145/2343483.2343501 · Cited by 291
Design and fabrication of materials with desired deformation behavior
Bickel, B., Bächer, M., Otaduy, M. A., Lee, H. R., Pfister, H., Gross, M., & Matusik, W. (2010) · ACM Transactions on Graphics · doi:10.1145/1778765.1778800 · Cited by 259
Self-citationCost-effective printing of 3D objects with skin-frame structures
Wang, W., Wang, T. Y., Yang, Z., et al. (2013) · ACM Transactions on Graphics · doi:10.1145/2508363.2508382 · Cited by 252
Coelho, P. G., Fernandes, P. R., Guedes, J. M., et al. (2007) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-007-0141-3 · Cited by 242
Design of graded two-phase microstructures for tailored elasticity gradients
Zhou, S., & Li, Q. (2008) · Journal of Materials Science · doi:10.1007/s10853-008-2722-y · Cited by 183
OpenFab: a programmable pipeline for multi-material fabrication
Vidimče, K., Wang, S.-P., Ragan‐Kelley, J., & Matusik, W. (2013) · ACM Transactions on Graphics · doi:10.1145/2461912.2461993 · Cited by 150
Fabricating microgeometry for custom surface reflectance
Weyrich, T., Peers, P., Matusik, W., & Rusinkiewicz, S. M. (2009) · ACM Transactions on Graphics · doi:10.1145/1531326.1531338 · Cited by 135
Numerical coarsening of inhomogeneous elastic materials
Kharevych, L., Mullen, P., Owhadi, H., & Desbrun, M. (2009) · ACM Transactions on Graphics · doi:10.1145/1531326.1531357 · Cited by 110
Interactive Material Design Using Model Reduction
Xu, H., Li, Y., Chen, Y., & Barbič, J. (2015) · ACM Transactions on Graphics · doi:10.1145/2699648 · Cited by 90
Chen, D., Levin, D. I. W., Didyk, P., Sitthi‐Amorn, P., & Matusik, W. (2013) · ACM Transactions on Graphics · doi:10.1145/2461912.2461994 · Cited by 89
An Improved Three-Weight Message-Passing AlgorithmPreprint
Derbinsky, N., Bento, J., Elser, V., & Yedidia, J. S. (2013) · arXiv (Cornell University) · doi:10.48550/arxiv.1305.1961 · Cited by 37
Cited by
Current and future trends in topology optimization for additive manufacturing
Liu, J., Gaynor, A. T., Chen, S., Kang, Z., Suresh, K., Takezawa, A., Li, L., Kato, J., Tang, J., Wang, C. C. L., et al. (2018) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-018-1994-3 · Cited by 870
Deep generative modeling for mechanistic-based learning and design of metamaterial systems
Wang, L., Chan, Y.-C., Ahmed, F., Liu, Z., Zhu, P., & Chen, W. (2020) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2020.113377 · Cited by 363
Designing perturbative metamaterials from discrete models
Matlack, K. H., Serra-Garcia, M., Palermo, A., Huber, S. D., & Daraio, C. (2018) · Nature Materials · doi:10.1038/s41563-017-0003-3 · Cited by 204
Self-citation
Metadata
- Authors
- Schumacher, C., Bickel, B., Rys, J., Marschner, S., Daraio, C., & Gross, M.
- Venue
- ACM Transactions on Graphics
- Published
- 2015-07-27
- Volume
- 34
- Issue
- 4
- Pages
- 1-13
- ISSN
- 0730-0301 (ISSN-L)
- 1557-7368
- OpenAlex
- W2082772288
- Cited by
- 414
- References
- 21
- FWCI
- 34.98
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.