The DOI matches its Crossref record.
Effects of wireless physical layer modeling in mobile ad hoc networks
Abstract
In most studies on mobile ad hoc networks (MANET), simulation models are used for the evaluation of devices and protocols. Typically, such simulations focus on the specific higher layer protocols that are being proposed, and tend to ignore details of models at other layers, particularly the interactions with physical layer models. In this paper, we present the set of factors at the physical layer that are relevant to the performance evaluations of higher layer protocols. Such factors include signal reception, path loss, fading, interference and noise computation, and preamble length. We start the discussion with the comparisions of physical layer models in ns-2 and GloMoSim, two commonly used simulators for MANET studies, and then quantify the impact of the preceding factors under typical scenarios used for the performance evaluation of wireless ad hoc routing protocols. Our experimental results show that the factors at the physical layer not only affect the absolute performance of a protocol, but because their impact on different protocols is non-uniform, it can even change the relative ranking among protocols for the same scenari
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A Survey on Wireless Security: Technical Challenges, Recent Advances, and Future Trends
Zou, Y., Zhu, J., Wang, X., & Hanzo, L. (2016) · Proceedings of the IEEE · doi:10.1109/jproc.2016.2558521 · Cited by 1,272
Vehicle-to-Vehicle Communication: Fair Transmit Power Control for Safety-Critical Information
Torrent-Moreno, M., Mittag, J., Santi, P., & Hartenstein, H. (2009) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2009.2017545 · Cited by 562
Effectiveness of RTS/CTS handshake in IEEE 802.11 based ad hoc networks
Xu, K., Gerla, M., & Bae, S. (2003) · Ad Hoc Networks · doi:10.1016/s1570-8705(03)00015-5 · Cited by 444
What is the right model for wireless channel interference?
Iyer, A., Rosenberg, C., & Karnik, A. (2009) · IEEE Transactions on Wireless Communications · doi:10.1109/twc.2009.080720 · Cited by 292
Challenging the IPv6 Routing Protocol for Low-Power and Lossy Networks (RPL): A Survey
Kim, H.-S., Ko, J., Culler, D. E., & Paek, J. (2017) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2017.2751617 · Cited by 278
Improving Propagation Modeling in Urban Environments for Vehicular Ad Hoc Networks
Hosseini Tabatabaei, S. A., Fleury, M., Qadri, N. N., & Ghanbari, M. (2011) · IEEE Transactions on Intelligent Transportation Systems · doi:10.1109/tits.2011.2143707 · Cited by 46
Metadata
- Authors
- Takai, M., Martin, J., & Bagrodia, R.
- Venue
- Proceedings of the 2nd ACM international symposium on Mobile ad hoc networking & computing - MobiHoc '01
- Publisher
- ACM Press
- Published
- 2001
- Pages
- 87
- OpenAlex
- W4256020710
- Cited by
- 198
- References
- 0
- Type
- conference abstract
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.