The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Point Defects in Oxides: Tailoring Materials Through Defect Engineering
Abstract
Optimization of electrical, optical, mechanical, and other properties of many advanced, functional materials today relies on precise control of point defects. This article illustrates the progress that has been made in elucidating the often complex equilibria exhibited by many materials by examining two recently well-characterized model systems, TlBr for radiation detection and Pr x Ce 1−x O 2−δ, of potential interest in solid-oxide fuel cells. The interplay between material composition, electrical conductivity, and mechanical properties (electrochemomechanics) is discussed, and implications in these relations, for example, enhancing electrical properties through large mechanical strains, are described. The impact of space charge and strain fields at interfaces, particularly important in nanostructure materials, is also emphasized. Key experimental techniques useful in characterizing bulk and surface defects are summarized and reviewed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Theoretical approaches to x-ray absorption fine structure
Rehr, J. J., & Albers, R. C. (2000) · Reviews of Modern Physics · doi:10.1103/revmodphys.72.621 · Cited by 3,301
Conduction Model of Metal Oxide Gas Sensors
Barsan, N., & Weimar, U. (2001) · Journal of Electroceramics · doi:10.1023/a:1014405811371 · Cited by 2,721
Factors Governing Oxygen Reduction in Solid Oxide Fuel Cell Cathodes
Adler, S. B. (2004) · Chemical Reviews · doi:10.1021/cr020724o · Cited by 2,316
Relations between the Concentrations of Imperfections in Crystalline Solids
Kröger, F. A., & Vink, H. J. (1956) · Solid State Physics · doi:10.1016/s0081-1947(08)60135-6 · Cited by 2,125
(1986) · Springer eBooks · doi:10.1007/978-3-642-71010-0 · Cited by 2,123
Physical, chemical and electrochemical properties of pure and doped ceria
Mogensen, M. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(99)00318-5 · Cited by 2,094
The Chemistry of Imperfect Crystals
Kröger, F. A., & Nachtrieb, N. H. (1964) · Physics Today · doi:10.1063/1.3051186 · Cited by 1,994
Electrochemical Impedance Spectroscopy
Orazem, M. E., & Tribollet, B. (2008) · Wiley eBooks · doi:10.1002/9780470381588 · Cited by 1,676
Impedance spectroscopy: Emphasizing solid materials and systems
Hollins, P. (1988) · Spectrochimica Acta Part A: Molecular Spectroscopy · doi:10.1016/0584-8539(88)80155-7 · Cited by 1,583
Electrochemical Impedance Spectroscopy
(2016) · Encyclopedia of Membranes · doi:10.1007/978-3-662-44324-8_100089 · Cited by 1,580
Cited by
Metal-oxide-semiconductor based gas sensors: screening, preparation, and integration
Zhang, J., Qin, Z., Zeng, D., & Xie, C. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp07799d · Cited by 556
Electronic defects in metal oxide photocatalysts
Pastor, E., Sachs, M., Selim, S., Durrant, J. R., Bakulin, A. A., & Walsh, A. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00433-0 · Cited by 534
Defect engineering in thermoelectric materials: what have we learned?
Zheng, Y., Slade, T. J., Hu, L., Tan, X. Y., Luo, Y., Luo, Z.-Z., Xu, J., Yan, Q., & Kanatzidis, M. G. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00347j · Cited by 482
Role of oxygen vacancy in metal oxides for photocatalytic CO2 reduction
Jiang, W., Loh, H., Low, B. Q. L., Zhu, H., Low, J., Heng, J. Z. X., Tang, K. Y., Li, Z., Loh, X. J., Ye, E., et al. (2023) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2022.122079 · Cited by 401
Understanding Chemical Expansion in Non‐Stoichiometric Oxides: Ceria and Zirconia Case Studies
Marrocchelli, D., Bishop, S. R., Tuller, H. L., & Yildiz, B. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201102648 · Cited by 400
Self-citation
Metadata
- Authors
- Tuller, H. L., & Bishop, S. R.
- Venue
- Annual Review of Materials Research
- Publisher
- Annual Reviews
- Published
- 2011-08-04
- Volume
- 41
- Issue
- 1
- Pages
- 369-398
- ISSN
- 1531-7331 (ISSN-L)
- 1545-4118
- OpenAlex
- W2150446629
- Cited by
- 389
- References
- 33
- FWCI
- 0.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Point Defects in Oxides: Tailoring Materials Through Defect Engineering. https://app.cochat.ai/papers/10.1146/annurev-matsci-062910-100442
- The paper
- Tuller, H. L., & Bishop, S. R. (2011). Point Defects in Oxides: Tailoring Materials Through Defect Engineering. Annual Review of Materials Research. https://doi.org/10.1146/annurev-matsci-062910-100442
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.