The DOI matches its Crossref record.
Performance of Proton Exchange Membrane Fuel Cell Electrodes Prepared by Direct Deposition of Ultrathin Platinum on the Membrane Surface
Abstract
Proton exchange membrane fuel cell (PEMFC) electrodes were fabricated using a plasma‐sputtering technique that deposits platinum directly on the surface of the Nafion electrolyte. This thin catalyst layer showed remarkable improvement in utilization efficiency, defined as the utilizable portion of the total deposited catalyst. This efficiency, equivalent to 0.043 mg Pt cm − 2 loading of platinum, is about ten times higher than that of the electrodes produced by conventional methods. Application of carbon/Nafion ink on the bare Nafion surface prior to the initial sputtering, and repetition of the sputtering followed by the application of the ink on the treated surface after each sputtering, greatly enhanced the utilization efficiency of the loaded platinum. © 1999 The Electrochemical Society. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Review and analysis of PEM fuel cell design and manufacturing
Mehta, V., & Cooper, J. S. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00542-6 · Cited by 1,685
Litster, S., & McLean, G. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.12.055 · Cited by 1,275
Prospects for Alkaline Anion‐Exchange Membranes in Low Temperature Fuel Cells
Varcoe, J. R., & Slade, R. C. T. (2005) · Fuel Cells · doi:10.1002/fuce.200400045 · Cited by 1,260
A review of water flooding issues in the proton exchange membrane fuel cell
Li, H., Tang, Y., Wang, Z., Shi, Z., Wu, S., Song, D., Zhang, J., Fatih, K., Zhang, J., Wang, H., et al. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.12.068 · Cited by 1,026
AC impedance technique in PEM fuel cell diagnosis—A review
YUAN, X., WANG, H., COLINSUN, J., & ZHANG, J. (2007) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2007.05.036 · Cited by 711
A review of platinum-based catalyst layer degradation in proton exchange membrane fuel cells
Zhang, S., Yuan, X.-Z., Hin, J. N. C., Wang, H., Friedrich, K. A., & Schulze, M. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.06.073 · Cited by 661
Ionic Conductivity of PEMFC Electrodes
Li, G., & Pickup, P. G. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1611493 · Cited by 273
Wee, J.-H., Lee, K.-Y., & Kim, S. H. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.12.051 · Cited by 261
A sharp peak in the performance of sputtered platinum fuel cells at ultra-low platinum loading
O’Hayre, R., Lee, S.-J., Cha, S.-W., & Prinz, F. B. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00238-0 · Cited by 252
Self-citationWang, W., Chen, S., Li, J., & Wang, W. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.02.027 · Cited by 115
Jeon, S., Lee, J., Rios, G. M., Kim, H.-J., Lee, S.-Y., Cho, E., Lim, T.-H., & Hyun Jang, J. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.06.044 · Cited by 113
Fouzaï, I., Gentil, S., Bassetto, V. C., Silva, W. O., Maher, R., & Girault, H. H. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta07470e · Cited by 102
Wan, C.-H., Lin, M.-T., Zhuang, Q.-H., & Lin, C.-H. (2006) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2005.11.119 · Cited by 48
Metadata
- Authors
- Cha, S. Y., & Lee, W. M.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1999-11-01
- Volume
- 146
- Issue
- 11
- Pages
- 4055-4060
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2020094150
- Cited by
- 179
- References
- 0
- FWCI
- 2.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.